ALUMINUM CHRISTMAS TREES
Lowest Prices, Largest selection and Free Shipping**
New - Made in the USA


 

These high-quality nostalgic trees are a hand-made re-creation of the deco 'Space Age' aluminum Christmas tree of the 1950s. They are made to last for many Christmas seasons to come!

Aluminum Christmas Trees.  
Each NEW tree comes with a two year warranty.

Click on a tree size below for full details/specifications and ordering options. 
Also, only NEW Aluminum Christmas trees ordered from Oak Tree Vintage come with 2 FREE spare branches.

      

(click on above thumbnail to enlarge photo)

7 ft "CLASSIC"
ALUMINUM CHRISTMAS TREE

Made in the U.S.A.
for sale
The 7 ft "Classic" Aluminum Christmas Tree is one of our best sellers. It stands 7'6" tall and has a diameter of approximately 54". With 100, 27" branches, this tree is full and really needs little or no decorations to add a festive holiday appearance to any living room. However, the sturdy base and stiff branches hold even the heaviest ornaments.
The tree comes packed in a heavy duty box with cardboard tubes to protect each branch. We also include the tubular steel stand with each 7' tree. These stands are amazingly well built from tube steel, and unfold to a wide, 21"  footprint. For maximum viewing pleasure order at least one of our color wheels.



7ft Classic
Aluminum Christmas Tree

Your price $559.99

SORRY, BUT AS OF 12/3/12  -  ALL ALUMINUM CHRISTMAS TREES COMPLETELY SOLD OUT...FOREVER! FACTORY IS GONE.

Ornaments shown in photos
 sold separately.

       

(click on above thumbnail to enlarge photo)

5 ft "CLASSIC"
ALUMINUM CHRISTMAS TREE

Made in the U.S.A.
for sale
The 5 ft "Classic" Aluminum Christmas Tree is one of our best sellers. It is 60" tall and has a diameter of approximately 44". With 70, 20 inch branches, this tree is full and really needs little or no decorations to add a festive holiday appearance to any normal living room. However, the sturdy base and stiff branches hold even the heaviest ornaments.
The tree comes packed in a heavy duty box with cardboard tubes to protect each branch. We also include a solid milled, aluminum stand with each tree. These stands are amazingly well built from billet aluminum. For maximum viewing pleasure order at least one of our
color wheels.

5' Classic
Aluminum Christmas Tree

Your price $379.99

SORRY, BUT AS OF 12/3/12  -  ALL ALUMINUM CHRISTMAS TREES COMPLETELY SOLD OUT...FOREVER! FACTORY IS GONE.

Ornaments shown in photos sold separately.
 

(click on above thumbnail to enlarge photo)

MADE IN THE USA
4'* "CLASSIC"
ALUMINUM CHRISTMAS TREE

Made in the U.S.A.
for sale
The 4 ft* "Classic" Aluminum Christmas Tree is designed for rooms with limited space. This little beauty is 44" tall x 32" wide with 55, 14" branches. It fits nicely on a coffee or end table and makes a gorgeous sight for those viewing it through your window especially when "Aluminated" with one of our color wheels. Tree is full and really needs little or no decorations to add a festive holiday appearance to any normal living room. However, the sturdy base and stiff branches hold even the heaviest ornaments.
The tree comes packed in a heavy duty box with cardboard tubes to protect each branch. We also include a New, Re-Designed, We also include the tubular steel stand with each 7' tree. These stands are amazingly well built from heavy, tube steel, again in the USA. For maximum pleasure and convenience order at least one of our color wheels.


4' Classic
Aluminum Christmas Tree

Your price $249.99

SORRY, BUT AS OF 12/3/12  -  ALL ALUMINUM CHRISTMAS TREES COMPLETELY SOLD OUT...FOREVER! FACTORY IS GONE.


Ornaments shown in photos sold separately.

* Tree actually measures 44 inches in height
 

 
 CLASSIC ROTATING
 color wheel
 FOR ALUMINUM CHRISTMAS TREES
 for sale
 If you have an Aluminum Christmas, this is the first and a MUST HAVE accessory you need. Since you should not string electric lights on Aluminum Christmas trees, a Rotating Color Wheel is the traditional and best way to light it.
For maximum viewing pleasure order one of our color wheels. The color wheel lenses are Green, Blue, Red and Orange. It is designed for up to a 60 watt Halogen Spot / Flood* light (not included).
There is an On / Off switch on the AC cord. While one is great, 2 gets both sides, and 3 is crazy colorful. Yeah, Baby!
 
NEW COLOR WHEEL
 Normally $79.99 when ordered separately

SORRY, BUT

$54.99 when ordered with a tree and now
ONLY available with 'Tree Orders' shown above!

* Color Wheels have always been designed since their inception in the 50's, to work with Spot or Flood type bulbs.
Standard light bulbs are "omni-directional" and will be very ineffective as a light source when used in a color wheel.
When choosing bulbs, purchase small to medium diameter bulbs. The largest body bulbs will not fit unless you also purchase
base extensions. The new LED bulbs work great and fit well, generating far less heat and using many times less electricity.
Also, they are essentially built in the same manor they have been built in since the late 1950's. Some of the originals were metal, and some plastic. They all had plastic color wheels, that will melt / distort if exposed to excessive heat. This is usually caused by a wheel that has it's rotation impeded by something against it or because it get's knocked over. The motors while small looking do last many, many years. Again, they are using the same design and technology they were using in the 1950's, and I have lots of originals that are still working, so while the new one's are not made in the US, the new one's should last similarly.
 

 A NOTE ABOUT OUR NEW CHRISTMAS TREES
  
  These trees are proudly built in the USA.
  I personally have the 7' Slim Deluxe, 'Stainless' Aluminum Artificial Christmas Tree. WOW! I have sold these for 8 years now. The "stock" photos do not, nor could do them justice. I have sold many "vintage" trees over the past few years. I've had all the classic ones from Evergleam, Peco, StarBand, etc. and while they were all in fair shape for 40+ year old trees, they always had unraveling tinsel on the branches, numerous wrinkled / bent needles, bent branches, worn holes in the trunk allowing the branches to sag, beat-up trunks, bent stands and the occasional missing branch. We would always do a bit of "fix-up" on them, but if the tree had been used a few years and / or had not been packed away carefully, they just always looked fairly "haggard" (no slight meant on the famous, and rightfully so, country singer with the same last name). These new trees are so much better built, and I don't say that about many new versus older constructed things. I am fairly "old school", not because I necessarily pine for the old days, but because I take things apart to see how they're made. Most modern day products are very "disposable" and have been for the past 25 years in my opinion. These new trees are "bomb proof"! The tinsel is not simply thick aluminum foil. It's much thicker, and springier than any originals I've seen (ie; less likely to bend or crinkle). The needles are longer and the branches have a very cool, "technical" look about their symmetry. They're not just a string of tinsel, haphazardly wrapped around the branch wire.  The traditional way of attaching the needle tinsel to each branch is with cellophane (Scotch) type tape. This is how the "vintage" / original trees were done from the 50's & 60's. As anyone who has owned or owns an old one knows, the tape has likely long since lost it's adhesive / flexibility properties and are letting branches un-ravel. That will not be the case on our trees. Each branch is not taped, but double welded, at each end to avoid the usual problem of unraveling needles. Also, some older trees had the trunk wrapped with foil to achieve the "silver look". This will commonly be torn / ripped, or un-raveling itself as it was also held by tape, letting the bare, white pine wood show through. The usual fix for this is to strip the foil off, and simply paint them. Our 1.25" diameter, solid wood trunks are completely painted already the entire length to avoid the unsightliness of torn / raveling foil. The "new for 2011" stand is amazing when compared to any original. Instead of simply being "stamped thin steel" that is very light weight and "tippy", this new stand is built of heavy gauge, tubular steel with a VERY wide footprint. It's very heavy and solid and holds the tall 7' and 9' trees to a much more stable degree than any of the original versions. 

           

 The 5' and smaller trees come with our "billet" machined, aluminum stand.
 The branches come packed in sturdy cardboard tubes, not the flimsy "butcher paper" that the originals did, thus the branches are much more protected while being stored, and this also expedites packing up for storage at the end of the season in a shipping box that is mean to double as tree storage for many years to come. Finally each tree comes with a 2 year limited warranty against manufacturer defects.
  Sorry for being so "long winded", but having now seen one of these in real life, I can't say enough about these trees.
  You'll love it!!!

FYI. I see some references to "Stainless Steel Christmas Trees". They were never made from 'Stainless Steel', but aluminum.