Categories

Home
Hi-Fi / Stereo Gear
Speakers
Receivers
Tuners
Amps / Pre-Amps
EQs / Signal Procs
Cassette Decks
Reel - Reel Decks
Turntables
Cartridges
8 Track Players
Headphones
Speaker Parts
Stereo Parts
HI-Fi Accessories

Customer Care

Contact Us
Repair Resources
Restoration Steps
 

Purveyors of Electronic, Musical and Vintage goods from then, now and in between. 
Since 1982.

JVC STEREO PARTS
& SPARES FOR VINTAGE GEAR

 

Used JVC Stereo Hi-Fi Parts / Spares / reference. We have a JVC JR-S201 for parts, but some MAY fit the JVC JR-S301, JR-S401, JR-S501. Also parts for JVC 4VR-5404, 4VR-5414, JVC SEA-80 EQ parts.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Note about parts / spares sales

* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.

Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.

Parts, general condition / circuit board condition; Most of our parts are from 'salvage / donor' units. While we don't sell parts that are 'known' to be bad, occasionally parts will need further adjustment, cleaning, 'tweaking', or in the case of circuit boards, may need old, conductive glue / epoxy further cleaned, and some 'common' parts / components such as, aging / leaky capacitors, parts whose values have drifted, and some epoxy transistors may need to be replaced due to 'green / black / furry' legs, or because those parts were marked as 'sold separately'. Some circuit boards may have 'tired' "landing / solder pads", or severed traces, or cold / bad solder joints which can require solder re-flow or 'jumpers'. Unless noted, circuit boards will be 'crack / split / break' free.

Parts pricing; Most of our parts price / value will be based on a few things. Firstly, we are in the restoration / refurb business, so we consider what we would be willing to pay for the part if we needed it (which again, is what the parts are listed for in the first place, "our units"). Secondly, the rarity / value of the unit the part(s) fit. The 'Tuning Knob' for a receiver that has a final value of $350 will likely be much less than the "Tuning Knob" for a unit with a final value of $1500 or more (a set of tires for a typical sedan will be $400 to $600. A set for a Lamborghini can be $16,000). Thirdly, the 'rarity' of the part. Forth, the 'condition' of the part. Fifth, the difficulty to extract the part, or success rate for extracting certain parts. Sixth; frankly it's a LOT of work and time to part out a unit. Most take 1 to 3 days of shop time to process. Not only the disassembly, but the 4-15 hours of pre-testing / servicing and just as time consuming can be the amount of time it takes to do all of the research we do and the info we list on many parts for cross-referrencing to other units that my use the same parts by scouring service manuals. On many circuit boards we will list every 'semi-conductor' which is also very time consuming. Lastly, every call or email for a part can require 20 minutes to sometimes over an hour of 'phone support', often (about 70% of the time) with me convincing the potential purchaser that they don't need the part I have to solve their problem.
Sorry to sound like a "whiner" about selling parts, but "time is money".

Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' and most are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are commonly 'disproportionate' to their cost, typically nearly equal to and sometimes greater than the cost of the part.  Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight so are commonly just as expensive as shipping a 'complete unit'. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive).  It is what it is....

A non-response to an email of phone call / voice message request for a part that we don't show on one or our pages, or is already marked "SOLD" will be typical. We simply don't have the time / man-power resources to respond to every query we get for items we don't show as avail. Most folks get that. Having said that, I / we may respond if we have information on a substitution or other useful information relating to it.

A non-response to an email of phone call / voice message request for a part (we may appear to have, but typically 'highlighted in Orange or Yellow'), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale.  Also, parts requests can occasionally take time for us to respond to. While we may have a part listed, and we like to keep the website 100% accurate, occasionally a part will be 'used by us' or 'previously sold' and we by oversight, and we did not get the web listing marked "SOLD", or the part gets  'mis-placed' or 'lost' (laid down somewhere in the warehouse(s) and then it get's lost track of (that happens to our coffee cups all the time, then we find it months later with 'a good batch of 'penicillin' growing in it), so we like to 'lay eyes on it' prior to responding. Sometimes we just can't figure out which cabinet or drawer parts were assigned to (and we're working on a system for that one).

Some folks email / call and want us to respond either way / whether we have the part or not. Again, we simply do not have the time resources to do that. Our time must be utilized on the requests we can fulfill. 
Sorry for all the excuses, but that's how the 'system' (or lack thereof) works.
And, if you don't see it, we likely don't have it.
 Thank you for your understanding.

$20. MINIMUM ORDER



20% off sale on salvage stereo parts.


See sales banners on parts pages for details


Most of these components are "take-outs" from stereo gear that for various reasons we 'chopped' and unless otherwise noted are in serviceable / working condition / shape!
   In the case of output transistors, they will be tested / checked prior to posting and once again prior to shipment, pots / switches will be 'cursory' cleaned, parts already missing / utilized from circuit board will be noted, transformers will be checked prior to posting. Filter capacitors  will be tested / checked prior to posting and once again prior to shipment and 're-conditioned' / 're-formed' if necessary.

 

MOST OF THE PARTS LISTED BELOW ARE FROM SALVAGE UNITS.

 

 
 



 JRS201 
    

NEW LISTING 1/30/15

JVC R-S33 / RS33 STEREO RECEIVER PARTS / SPARES
Intermittently ‘relays’ OFF. Unit looks great and output transistors and power transformer all test fine.

Bonnet / Cover / Case / Shell, Wood grain vinyl covered metal case cover - $35.
(Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Bonnet / Cover / Case, ‘Side panels’, vinyl wood grain side panels, Left and Right, good condition
(less mounting screws sold separately) - $20. ea.

Bonnet / Cover / Case, ‘Mounting screws’ for wooden side panels, set of 8 - $20.

Panel / Plate, ‘Face’ panel with tuning window, aluminum. Minor edge nicks, but overall, good condition - $35.

Panel / Display, ‘Dial Light / Reflector box’, metal (#1813dial lamps / light bulbs not included, nor available from us, nor are the ‘blue condoms / silicone covers’) - $20.

Panel / Display, FM ‘Stereo Indicator’ red LED, on circuit board #TF-C28-4 with board mounted resistor - $20.

Panel / Display, ‘Tuning scale’ plastic (less pointer, LEDs, face plate sold separately) - $20.

Pointer / dial pointer, ‘Tuning pointer / indicator needle’ - $20.

JVC R-S33 / RS33 STEREO RECEIVER PARTS / SPARES

Knobs / Caps / Buttons / Covers, ‘Tuning’ knob, with plastic base, both - $25.

Knobs / Caps / Buttons / Covers, 'Push' switch caps ‘Speaker 1 / 2’,’Sea Rec’,’ Tape 1’,’Mono / FM Mute off’,’ Loudness’, ’Tape 2’,’Phono’,’ FM’,’AM’, ’High Filter’ with escutcheon / bezel (less push switches, face plate sold separately) - $15. each

Knobs / Caps / Buttons / Covers, ‘Volume’ OR ‘ Balance’ caps / buttons (less linear faders pots, face plate sold separately) - $15. ea.

Knobs / Caps / Buttons / Covers, ‘Graphic Equalizer’ caps / buttons (less linear fader pots sold separately) - $15. ea. 1 or 2 Remaining in stock

Knobs / Caps / Buttons / Covers, ‘Power’ push button cap/ button with escutcheon (less push button / switch, face plate  sold separately) -  $20. 

JVC R-S33 / RS33 STEREO RECEIVER PARTS / SPARES

Potentiometers / Controls, ‘Graphic Equalizer’ linear fader pots  - $20. ea.

Potentiometers / Controls
, ‘Balance’ control / Alps linear fader pot
(circuit board, cap / button, face plate sold separately)- $30.

Potentiometers / Controls, ‘Volume’ control / Alps linear fader pot (circuit board, cap / button, face plate sold separately)- $30.

Switch / Selector
, Push switches, ‘Loudness’, Tape 1’, Speaker 1’, Speaker 2’, ‘High Filter’, locking push switches
(less circuit board, caps / buttons sold separately) - $20. ea.

Switch / Selectors, Push switches, ,’ Mono’, ’Sea Rec’, locking push switches (less circuit board, caps/ buttons) - $25 ea.

Switch / Selectors, Push switches ‘Tape 2’ / ‘Phono’ / ‘FM’  / ‘AM’ / ‘High Filter’ Push Switches all sold as a set of four (4) - $40. for all 4 on bracket

Switch / Selector, ‘Power’ locking push switch, S-23TV-5, 5A250 VAC (less button / cap, face plate sold separately) - $30.

JVC R-S33 / RS33 STEREO RECEIVER PARTS / SPARES

String Wheel / Pulley, ‘FM tuning capacitor ‘string wheel’, plastic (less tuning capacitor) - $25.

Flywheel, ‘Tuning flywheel’ (less tuning scale, tuning capacitor  - $25.

Transformer, ‘Power’ transformer, Zebra E03077-52B / JH4-302UC / TD1F9E. North American mkt version -  $45.

Capacitors, ‘Filter’ capacitors Elna 56v / 8700uf - $20. ea.
 
Transistors, ‘Output Transistors’. Toshiba 2SB755, and / or 2SD845 (less circuit board, heat sink sold separately) - $25 ea. (Tested OK)

Heat sink, Power amplifier ‘heat sink’, aluminum
(less output transistors sold separately) - $25.

Capacitor, ‘FM Tuning’ capacitor ALPSQAA2234-007, 5 gang (less string wheel) - $35.

Relay, Omron Type ‘G2Z-222P, DC-24V 650 Ohm’ (less circuit board) - $30.

Heat Sink, Heat sink top ‘mounting / securing’ brackets - $15. pair

JVC R-S33 / RS33 STEREO RECEIVER PARTS / SPARES

Circuit Board, ‘Power supply’ / ‘Pre-Amp / Driver’ / ‘Amp Output’ circuit board #E10483-001  /  TXX255-7 with transistors; 2SA872, 2SA949, 2SA965, 2SA1029, 2SC1775, 2SC2235, 2SC2229, 2SC2240, 2SC2271, 2SC2546, horizontal package VC5022, TA7317P with reisitors MPC70 0.220 Ohm K, and balance of board mounted resistors, capacitors, rectifiers and diodes (less output transistors, relay, filter capacitors sold separately) - $55.

Circuit Board, ‘Display’ circuit board #TFC-28-2 / E10454-004 and #TFC 28-3 with signal strength and FM tuning LEDs Transistors: 2SA1029, 2SC458 and IC Sharp IR2434 and balance of other board mounted resistors, capacitors - $30.

Circuit Board, ‘ Control / switching’ circuit board. #TXX 255-6 / E10483-001, and balance of other board mounted resistors, capacitors (less push switches sold separately) - $25.

Circuit Board, ‘Main’ circuit board #TFC28-1 /  E10454-004, with transistors; 2SA970, 2SA1029, 2SC458,  Hitachi 2SC461, Hitachi 2SC535, 2SC2240, 2SK168, IC Hitachi HA1197, NEC UPC1161C, #4441 / 0050K, EO3793, adjustable / iron core / air core transformers, and balance of other board mounted resistors, diodes capacitors
(less FM tuning capacitor, I / 0 RCA Jacks, switches sold separately)- $55.

Circuit Board, LED ‘Output’ display circuit board with output level left / right LEDs  #TXX-255-3 / E10483-001 and circuit board TXX-255-4 / E10483-001 / TK-MF1-94V-1 with IC BA684A-106 and balance of other board mounted resistors, capacitors - $35.

Circuit Board, ‘Volume / Balance’ circuit board #TXX-255-5 (less volume and balance linear fader pots) - $25.

Circuit Board, ‘Equalizer / Tone’ circuit board #E23419-001 / TAP 283A with transistors: 2SC1775, and balance of board mounted resistors, capacitors (less linear fader pots - sold separately) - $30.

Circuit Board, ‘Equalizer’ circuit board #E10483-001 /TXX255-2 with horizontal package Hitachi HA1457W and balance of board mounted resistors, capacitors - $30.

Circuit Board, ‘Protection’ circuit board #E10483-001 / TXX-255A with transistors: 2SB507, 2SD313 with heat sink, capacitors 16v / 2200mf and 16v220mf and balance of other board mounted resistors, diodes, & capacitors - $35.


JVC R-S33 / RS33 STEREO RECEIVER PARTS / SPARES

Jacks, Headphone jack on Circuit board #E10483-001 / TXX-255 - $25.

Jacks / Connectors, RCA I/O source jacks; 'Phono’ /‘Tape 2’ OR ‘Tape 1’ - $20. ea set of 4 in a cluster

Jacks, AC 'convenience' outlet on Circuit board #E10483-001- $18.

Connectors / Terminals, ‘Speaker output’  connectors / terminals 2 panels with 2 pair per panel - $25. ea.

Panel, ‘Rear’ sheet metal panel (less jacks, connectors, antenna terminal / connectors sold separately) - $20.

Panel, bottom ‘Vent’ panel, sheet metal (balance of bottom panel sold separately) - $15.

Panel, ‘Bottom’ panel, sheet metal (less feet, vent panel sold separately) SOLD

Antenna, AM ‘antenna stick / tunable bar’ with bracket’  and circuit board E03721-002 - $35.

 Connectors / Terminals, antenna / inputs 75 Ohm, 3 posts - $20.

Connectors / Terminals, ‘FM’ antenna terminals1 pair 300 Ohm - $20.

Feet, ‘Plastic’ feet, set of 4 - $20. SOLD

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, South, Center Island, 1st / left-most cab / gray, 3rd drawer - Revised 9/9/19
 

 

 

 

 

JVC_JR-S201_Stereo_Receiver_web.jpg (29953 bytes)       JVC_JR-S201_Stereo_Receiver_collage.jpg (413289 bytes)

(Click on above thumbnails to enlarge photos)

JVC JR-S201 JRS201 STEREO RECEIVER PARTS / SPARES

Parting out. All inputs function well. AM & FM tuners both fine. Both amps produced a strong 19.7 Volts per channel @ 8 Ohms for 48 Watts and 16.5 Volts @ 4 Ohms for 68 Watts per channel via Darlington STK-0040 power pack outputs with 1 kHz input. Unit in very good shape with only minor wear to some of the front panel silk screening. Parting out due to sticky loudness and speaker 2 buttonAppears someone spilled / splashed a soda on the front, thus requiring more effort than we wish to pursue. Also we have never had one of these for parts in 12 years, so it's all good.
Inquire for part you need. 

Some parts may also fit the JR-S301, JR-S401 & 501, but we have no substitution info on that.

JVC JR-S201 / JRS201 Parts / Spares for sale

Bonnet, Top sheet metal cover - Good, light finish wear (may fit other models in this series) - $35. Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)
 
Face panel (less knobs / buttons / dial window)
worn silk screening on Volume controls - $39.

Window / Display, Plexi Dial Window 3 5/8" x 10 7/8" - $25. SOLD OR MIA

Chassis Parts, Plastic Side panels - $25. ea.
decent condition with very light, normal wear.

Knobs / Caps / Buttons / Covers,
Tuning knob / 'Gyro' assembly - $40SOLD

Knobs / Caps / Buttons / Covers, Volume knob / cap - $18.

Knobs / Caps / Buttons / Covers, Push Switch caps - $12. ea.

Knobs / Caps / Buttons / Covers, EQ / Equalizer caps, Silver - $15. ea. 1 left in stock

Potentiometer / control, Volume Linear Control / Pot - $35.

Potentiometer / control, Balance Linear Control / Pot - $35.

Potentiometer / control, EQ Linear Pots - $25. ea.

Switches, Push Switch bank / Input switch assembly (FM / AM / PHONO / AUX / FM MUTE) - $55. for all on circuit board TXX-113-4

Switches, Push Switches (Speaker 1 or 2, Subsonic Filter, Tape 1, Tape 2, MONO, Loudness) - $20. ea.

Switches, Push Switches (SEA REC) - $30.

Switch, Power Switch - $25.00 SOLD

Meters, VU "Signal Strength" or "FM Tuning" meters - $30. ea.


JVC JR-S201 / JRS201 Parts / Spares for sale

Transformer
,
Power supply Transformer (E03077-27 / FH5-302))- $45.

Capacitors, Power supply filter Caps ( 50V / 6800uf ) - SOLD ON TXX-129 BOARD BELOW

Amplifier, Power amplifier outputs (
Darlington STK-0040 power pack)- $22.50 ea. Pack

Relay, type MS4U / 24 VDC - $30.

Circuit Boards, S.E.A. (Sound Effects Amp) Circuit Board, TAC-488 IC chips; Hitachi HA1457, Transistors; 2SC1775, and balance of capacitors, diodes, & resistors (less linear faders / pots which are sold separately).
- $55.

Circuit Boards, AM/FM Tuning circuit board TFM-914GUA w/ tuning capacitor and IC chips; Hitachi HA1137W, HA1197, HA1156W, HA1211, JRC 4558D, Transistors; 2SC535, 2SC458, 2SC1342, Hitachi 2SK55, 2SK68, and balance of capacitors, diodes, chokes, coils, resistors, adjustable transformers (less antenna barrier strip and plastic string wheel / pulley) - $65.

Circuit Boards, Equalizer Amp Circuit Board, TXX-113-1 IC chips; Hitachi HA1457, and balance of capacitors, diodes, & resistors.
- $35.

Circuit Boards, Audio PC assembly / Amplifier Circuit Board, TXX-129 IC chips; TA7317P, 2SK129, Transistors; 2SA872, 2SA899, Sanyo 2SB514, 2SC1775, 2SC1904, 2SD330, and populated with the balance of Bridge Rectifier S4BV, capacitors, including 50V / 6800uF 'Filter Caps', chokes & coils, diodes, resistors & Emitter Resistors, & pc mounted potentiometers / variable resistors (less Darlington STK power packs and DEC relay which are sold separately).
- $65.

Circuit Boards, Speaker Output terminal circuit board TXX-129-3 (less output clips / terminals which are sold separately).
- $35.

Circuit Boards, Switch Board, TXX-113-4 (see above under switches)

Plastic Tuning string wheel - $25.


JVC JR-S201 / JRS201 Parts / Spares for sale

Jacks, Any single rear panel Input / Output component (speaker output strips, RCA panels, etc.) - $25. ea.
 
Jacks, Headphone jack - $25.

Jacks, Speaker output clips - $25. each strip of 4

Antenna, AM antenna - $30. SOLD

Antenna, AM Antenna bracket - SOLD

Feet - $20 for set of 4 or $12. ea.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, West / South West Side, 2nd / Tan cab from left, 2nd drawer. - Revised 11/13/18
 



 


    JVC_SEA-80_Stereo-EQ_Sal_collage.jpg (72704 bytes)

(Click on above thumbnails to enlarge photos)
JVC SEA-80
/ SEA80 EQ PARTS / SPARES
- PARTING OUT -
EQ does function fine, and display lights, but does not display signal.


Panel, Face Panel - $45. finish scuff in charcoal color above left corner of display and small 6mm surface 'cut' on left edge.

Display, Fluorescent, Spectrum Analyzer Display 'itron' CP1005 / MGB / ELU 0001-001, 10+1 bar graph display bands - $35. (Cond. ???)

Knobs / Buttons / Caps, Display level control knob - $25.

Knobs / Buttons / Caps, Silver Fader caps- $15. ea. 
(only 4 left in stock)

Knobs / Buttons / Caps, Toggle Switch caps - $15. ea.

 JVC SEA-80 SEA80 PARTS / SPARES


Transformer, Power supply transformer #E03042-26C - $55.

Selector, Voltage Selector on circuit board TPS-224B (less AC convenience outlets) - $35.

Potentiometer / Control, Linear fader / frequency pots ALPS #QVT602W-815 / 2X100k Ohms
(dimensions; overall body length = 88mm, body width = 7mm, throw = 60mm from stem center to center, stem / lever length = 20mm and and is parallel for 1st 10mm then tapers from 5mm-3mm at terminus) - $25. ea. less cap

Potentiometer / Control, Display level control #QVG442B / 50k Ohms
(less knob) - $25.

Switches, Bank of 3 push switches
(Mode Left / Right and Memory) - $35. set of three

Switches, Any flip / toggle switch except 'Power'
(MIC, SEA, SEA REC, Tape Monitor, Pink Noise) - $25. ea.

Switches, 'Power' Toggle Switch 4A/32A 250V / SDE4L WITH silver toggle cap
- $35. SOLD

 JVC SEA-80 / SEA80 PARTS / SPARES

Circuit Board / PCB
, 'Pink Noise Generator / Filter & rectifier' PCB TXX-189-2, w/ IC chips / OP Amps; JRC 4558D & Toshiba TC4016BP and balance of capacitors, diodes, and resistors. - $65.

Circuit Board / PCB
, Control Pulse / Memory / X-Driver / Y-Driver PCB TXX-189 C, w/ ic chips JRC 4558D / 9486, 4558D / 9572, 4558D / 9610, 4558DD / 9264 & Toshiba TC4016BP & TC4017BP and balance of capacitors, diodes, and resistors. - $65.

Circuit Board / PCB
, 'Mic Mixer / Switch PCB' TXX-190A w/ chip TA7317P w/ transistors; 2SA872, 2SC458, 2SC1775, 2SC2229, 2SK106W (pairs) and balance of capacitors, diodes, resistors and pc mounted trim pots. 
(less switches & relay) - $65.

Circuit Board / PCB
, 'Mic Input / switch' Circuit Board' PCB TXX-190-2 with IC JRC 4558D / 9572, transistors; 2SA872, 2SC458, 2SK105, and balance of capacitors, diodes, and resistors. (less mic jack and switch) - $35.

Circuit Board / PCB
, 'Graphic Display Level / Display switches' Circuit Board' PCB TXX-190-3 w/ resistors.
(less switch bank and level pot) - $35.

Circuit Board / PCB
, 'Resonant Circuit Board' PCB TXX-191-A Zone-1 w/ transistors; 2SA1084, 2SC1775, and balance of capacitors, diodes, and resistors. - $55. ea.

Circuit Board / PCB
, 'Resonant Circuit Board' PCB TXX-191-A Zone-2 w/ transistors; 2SA1084, 2SC1775, and balance of capacitors, diodes, and resistors. - $55. ea.

Circuit Board / PCB
, 'Linear fader circuit Board' PCB TXX-191-2
(less linear fader pots which are available individually and separately) - $45. ea.

Circuit Board / PCB
, 'D.C. Power Supply PCB TPS-222C w/ transistors  / voltage regulators; 2SA872, 2SB507V, K105, 2SC458, 2SD313V, bridge rectifier, fuse holders, and balance of capacitors, diodes, and resistors.
(less fuses) - $65.
SOLD

Circuit Board / PCB
, 'Graphic Display Control PCB TPS-224B
(less AC jacks & 'Voltage Selector) - $45. MIA / SOLD???


Relay, ESK 2D12-212 / 14Y8 - $25.

 JVC SEA-80 / SEA80 PARTS / SPARES

Fuse Holder,
(Fuse cap insert sold separately) - $20.

Fuse Cap,
(Fuse holder sold separately) - $30.

Jacks, RCA I/O section w/ DIN jack on pcb TXX-189-3 - $45.

Jacks, AC convenience jacks - $20. ea.

Jacks, Microphone input jack - $25.

Panel, Rear sheet metal panel
(less components) - $25.

Feet, Feet set -  $20 for set of 4


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, West / South West Side, 1st / Tan cab from left, 2nd drawer, right side. - Revised 3/6/2020
 

 

 



(Click on above thumbnails to enlarge photos)
JVC
4VR-5404
4-CHANNEL STEREO RECEIVER
NEEDS WORK

for sale
JVC 4VR-5404, 4-channel, Quadraphonic, Stereo receiver for sale for repair / restoration. Outputs are "square waving" and will likely need driver work or replacement.
As-Is complete
$40.
SOLD MOVIE PROP?


 

(Click on above thumbnails to enlarge photos)
JVC
4VR-5414
4-CHANNEL STEREO RECEIVER
NEEDS WORK

for sale
JVC 4VR-5414, 4-channel, Quadraphonic, Stereo receiver for sale for repair / restoration. Output shuts down at about 5 Volts output so will likely need replacement.
As-Is complete
$40.
SOLD MOVIE PROP?


 


 


 


Unless specifically noted, we do not typically sell 'component level' parts such as resistors, diodes, transistors, semiconductors, ic's / integrated circuit chips, ceramic capacitors, led's, bulbs, lamps, belts, etc. We do commonly sell circuit boards / cards which will likely come with those parts attached.
 
 

 


 

LINKS TO OUR 'HI-FI' DEPARTMENTS

Amps and
Pre-Amps

Receivers

Cassette
Decks

Tuners

Turntables

8-Track Decks

CD Players

Reel-Reel
Decks

EQs and Signal
Processors

Speakers

Betamax and
VHS VCRs

Turntable Cartridges

Tube Audio

Ne'cessories

Speaker Parts

Record Players

Vintage Radios

Vintage
Walkmans

Headphones

Stereo Parts


Wondering where the "tone" you remember went?....


 

.... Surround yourself with Silver and find it again!


CONTACT INFO BELOW

$20. MINIMUM ORDER

 

                                             

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.


    Before calling, PLEASE read the text in below.      
 BEFORE
CALLING

(800) 806-4231 EXT #1
~10:00 AM- ~5:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE


OR

BEFORE EMAILING
 
parts@oaktreevintage.com

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

We DO NOT have your part unless the following conditions are met:

A) You HAVE SEARCHED our page(s) and HAVE FOUND the part you are looking for SPECIFICALLY listed on one of our pages or you have solid information that it's a 'bona fide' substitution for your part (unless noted already, we won't have any further info along those lines)
AND
B) The part that you have found is NOT marked as SOLD or SOLD OUT.


If you do NOT see it listed after thoroughly searching the pertinent page
(likely the page you landed on originally),  
we do not have it,   
nor do we know when
it might come in,   
nor do we maintain "waiting lists" for parts,    
nor do we know who
might have it.

Sorry, but phone and email traffic for parts
we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.


 We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!


ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT
lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms may automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings".
We do not return calls / emails for requests for parts we don't show / or have available (we may choose contact with further, useful information).


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |  KEYBOARD PARTS 

___________________________________________

Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.


Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |   SELLING-TRADING-CONSIGNING   |  KEYBOARD PARTS   I   FAQ'S  
  CONDITION RATINGS   |   ORDERING / POLICIES    |    WARRANTIES / RETURNS   |   SHIPPING     
 RESTORATION PROCEDURES   |   REPAIRS  | CONTACT PARTS


As much of the price charged for parts is for the 'time to extract' from it's donor unit, unless we send the 'wrong part', parts are NOT returnable.
See our "
Warranties / Returns" page via the link below for more details.


POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately
. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent
research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
 

Copyright © 1997-2023 Oak Tree Enterprises, LLC

COPYRIGHT INFORMATION