Categories

Home
Hi-Fi / Stereo Gear
Speakers
Receivers
Tuners
Amps / Pre-Amps
EQs / Signal Procs
Cassette Decks
Reel - Reel Decks
Turntables
Cartridges
8 Track Players
Headphones
Speaker Parts
Stereo Parts
HI-Fi Accessories

Customer Care

Contact Us
Repair Resources
Restoration Steps
 

Purveyors of Electronic, Musical and Vintage goods from then, now and in between. 
Since 1982.

STEREO / HOME AUDIO
ELECTRONIC PARTS & SPARES -
PARTS UNITS / SALVAGE UNITS
VINTAGE AND USED
 

 

Stereo / Home Audio parts spares replacement electronic parts. Replacement Parts for some Vintage receivers, cassette decks, amplifiers, stereo gear / equipment, amp amplifier parts cassette decks, tape recorders, tape players, turntables, record players, replacement parts / spares for reference and cross reference and occasionally for sale. Spares / Parts for 'vintage' stereo units by brands such as MILLER & KREISEL / M&K, MCS, NAD, OPTONICA / SHARP and others.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Note about parts / spares sales

* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.

Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.

Parts, general condition / circuit board condition; Most of our parts are from 'salvage / donor' units. While we don't sell parts that are 'known' to be bad, occasionally parts will need further adjustment, cleaning, 'tweaking', or in the case of circuit boards, may need old, conductive glue / epoxy further cleaned, and some 'common' parts / components such as, aging / leaky capacitors, parts whose values have drifted, and some epoxy transistors may need to be replaced due to 'green / black / furry' legs, or because those parts were marked as 'sold separately'. Some circuit boards may have 'tired' "landing / solder pads", or severed traces, or cold / bad solder joints which can require solder re-flow or 'jumpers'. Unless noted, circuit boards will be 'crack / split / break' free.

Parts pricing; Most of our parts price / value will be based on a few things. Firstly, we are in the restoration / refurb business, so we consider what we would be willing to pay for the part if we needed it (which again, is what the parts are listed for in the first place, "our units"). Secondly, the rarity / value of the unit the part(s) fit. The 'Tuning Knob' for a receiver that has a final value of $350 will likely be much less than the "Tuning Knob" for a unit with a final value of $1500 or more (a set of tires for a typical sedan will be $400 to $600. A set for a Lamborghini can be $16,000). Thirdly, the 'rarity' of the part. Forth, the 'condition' of the part. Fifth, the difficulty to extract the part, or success rate for extracting certain parts. Sixth; frankly it's a LOT of work and time to part out a unit. Most take 1 to 3 days of shop time to process. Not only the disassembly, but the 4-15 hours of pre-testing / servicing and just as time consuming can be the amount of time it takes to do all of the research we do and the info we list on many parts for cross-referrencing to other units that my use the same parts by scouring service manuals. On many circuit boards we will list every 'semi-conductor' which is also very time consuming. Lastly, every call or email for a part can require 20 minutes to sometimes over an hour of 'phone support', often (about 70% of the time) with me convincing the potential purchaser that they don't need the part I have to solve their problem.
Sorry to sound like a "whiner" about selling parts, but "time is money".

Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' and most are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are commonly 'disproportionate' to their cost, typically nearly equal to and sometimes greater than the cost of the part.  Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight so are commonly just as expensive as shipping a 'complete unit'. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive).  It is what it is....

A non-response to an email of phone call / voice message request for a part that we don't show on one or our pages, or is already marked "SOLD" will be typical. We simply don't have the time / man-power resources to respond to every query we get for items we don't show as avail. Most folks get that. Having said that, I / we may respond if we have information on a substitution or other useful information relating to it.

A non-response to an email of phone call / voice message request for a part (we may appear to have, but typically 'highlighted in Orange or Yellow'), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale.  Also, parts requests can occasionally take time for us to respond to. While we may have a part listed, and we like to keep the website 100% accurate, occasionally a part will be 'used by us' or 'previously sold' and we by oversight, and we did not get the web listing marked "SOLD", or the part gets  'mis-placed' or 'lost' (laid down somewhere in the warehouse(s) and then it get's lost track of (that happens to our coffee cups all the time, then we find it months later with 'a good batch of 'penicillin' growing in it), so we like to 'lay eyes on it' prior to responding. Sometimes we just can't figure out which cabinet or drawer parts were assigned to (and we're working on a system for that one).

Some folks email / call and want us to respond either way / whether we have the part or not. Again, we simply do not have the time resources to do that. Our time must be utilized on the requests we can fulfill. 
Sorry for all the excuses, but that's how the 'system' (or lack thereof) works.
And, if you don't see it, we likely don't have it.
 Thank you for your understanding.

$20. MINIMUM ORDER



20% off sale on salvage stereo parts.


See sales banners on parts pages for details



Most of these components are "take-outs" from stereo gear that for various reasons we 'chopped' and unless otherwise noted are in serviceable / working condition / shape!
   In the case of output transistors, they will be tested / checked prior to posting and once again prior to shipment, pots / switches will be 'cursory' cleaned, parts already missing / utilized from circuit board will be noted, transformers will be checked prior to posting. Filter capacitors  will be tested / checked prior to posting and once again prior to shipment and 're-conditioned' / 're-formed' if necessary.

 


ADC

AKAI

Allied 

B&O (Bang & Olufsen)

BSR

DBX

DYNACO
(Scroll down page for Dynaco)

EICO


FISHER

HARMAN-KARDON / HK

HEATHKIT

JVC

KENWOOD

LUXMAN

MARANTZ

NAD

NIKKO

ONKYO

PHASE LINEAR

PHILIPS

PIONEER

REALISTIC

ROBERTS

ROTEL

SANSUI

SONY

TANDBERG

TEAC / TASCAM

TECHNICS

TELEFUNKEN

TOA

TOSHIBA

YAMAHA

More, Misc. parts units below.

If you simply wish to 'ditch' your speakers and get a pair of great vintage speakers, that have already been restored competently,

 
HERE IS THE WAY TO OUR 'Main Hi-Fi Directory'


_____________________________________________________________________________________________________


 

 


CLICK HERE TO LINK TO OUR OUTPUT TRANSISTOR / BRAND-MODEL CROSS REFERENCE CHART

 

  Link to our "Search Page" to search entire site / individual pages 

 


So, here's a package of parts we recently received from an Ebay seller. He advertised them as "some pins may be bent, but should be easy to straighten". Ok, but at least fasten them to a piece of cardboard, or something 'rigid' so they don't get any worse, instead of just putting them loose into an envelope.
Jeeesh...some peoples children!



 

MOST OF THE PARTS LISTED BELOW
ARE FROM SALVAGE UNITS.


 

 


 

 
 

NEW LISTING 2/4/18
(Click on above thumbnails to enlarge photos)

CONCEPT 6.5 STEREO RECEIVER PARTS / SPARES

Parted out due to 'no stereo FM reception / stereo indicator function' (no, it wasn't just the bulb). All else tested well.
On our test bench, the internal amplifiers of this receiver #...7491, produced 25.5 Volts per channel @ 8 Ohms with 1KHz input for 81 Watts and 21 Volts per channel @ 4 Ohms with 1KHz input for 110 Watts via discrete, TO3, metal cased outputs. (2x 2SC1116 & 2x 2SA747) AC Idle current at .4A, & floor noise L=<40mVAC & R=<30mVAC (both prior to any sort of adjustment, which we didn't do any further work on, due to the "no stereo indicator" issue).


Bonnet / Top Plate / Panel / Cover / Lid, – SOLD (Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Panel, Face Panel w/ dial window, minor wear to plexi window, small ‘tics’ / wear to bottom edge, and left edge, with a small scratches near below the 'speaker "C"' switch, of aluminum face, but overall decent condition. Would use on a restoration with an end rating of 8-8.5 - $75.

Panel, silk screen dial display / 'Slide Rule'. Brushed aluminum - $35.

Pointer / Indicator, Dial Pointer / Needle - $35.

Diffusion Panel, Light Diffusion Plexiglas (bulbs / lamps not included) - $25.

Sockets, Dial lamp / bulb plastic / twist sockets (lamps / bulbs not included) - $20. ea.

Sockets, 'Stereo Indicator' lamp / bulb rubber socket (lamps / bulbs not included) - $20.


CONCEPT 6.5 STEREO RECEIVER PARTS / SPARES

The knobs / caps / buttons from Concept Stereo Receivers are quite 'interchangeable' across most of the models. While we don't have official part numbers / cross-reference info, generally if they 'look' the same, they will interchange.

Knobs / Caps / Buttons / Covers, 'Rectangular' 'Input Selector' knob / Paddle. Decent cond. Lower, right corner small 'ding'. - $35.

Knobs / Caps / Buttons / Covers
, Round ‘Tuning’ Knob - $40.

Knobs / Caps / Buttons / Covers, Round ‘Volume' or 'Balance’ knob. Decent with minor scuffs. - $35.

Knobs / Caps / Buttons / Covers, Rectangle 'Push Caps' for; ‘Power’, ‘Loudness’, ‘Tone Defeat’, ‘FM Muting’, ‘High Filter’, ‘Mono’, ‘Mon Tape1’, ‘Mon Tape 2’ ‘Speaker Selector Switches A, B, or C. - $25. ea.

Knobs / Caps / Buttons / Covers, Round ‘Treble / Mid-Treble’, ‘Bass / Mid-Bass’ 'Stacked pairs' - $40. ea. 'Stacked pair'
(slight scratches / striations, but nothing too distracting)
SOLD OUT

Switches / Selectors, ‘Input Selector‘ rotary wafer switch, ‘FM‘, ‘AM‘, ‘Phono 1‘, ‘Tape 1’, ‘Tape 2’ - $55.

Switches / Selectors, Push switches; ‘FM Muting’, ‘Mono’, ‘Monitor Tape1’, ‘Monitor Tape 2’, ‘High Filter’. These switches are sandwiched between two continuous circuit boards, as well as each has an LED attached to the upper circuit board. Due to the complexity for us to remove any 'single' switch, we are only offering them as a 'set / bank' complete with their associated circuit boards P-200576 & P-200577, and LED's attached as an assembly.
(buttons / caps sold separately) - $85. as a complete assembly

Switches / Selectors, Push switches; ‘Tone Defeat’, ‘Loudness’, ‘Speaker Selector Switch C’, ‘Speaker B’, ‘Speaker A
, 'Power'.  These switches are sandwiched between two continuous circuit boards, as well as each has an LED attached to the upper circuit board. Due to the complexity for us to remove any 'single' switch, we are only offering them as a 'set / bank' complete with their associated circuit boards P-200537 & P-200538, and LED's attached as an assembly. (buttons / caps sold separately) - $85. as a complete assembly

CONCEPT 6.5 STEREO RECEIVER PARTS / SPARES


Potentiometer / Controls, ‘Volume’ pot. Noble, 100k Ohms X2, stacked. 2.25" overall depth from rear of body to tip of 'split and splined shaft. 1.5" overall shaft length including threaded collar. Threaded collar approx 6-7mm in depth - $55. ea.

Potentiometer / Controls, Noble quadruple stacked ‘Treble Mid Treble’ pot - $55. SOLD

Potentiometer / Controls, Noble quadruple stacked ‘Bass / Mid Bass’ pot - $55.


Potentiometer / Controls, Noble double stacked 'Balance' pot 100k Ohms x 2 - $40.

Flywheel
, Dial Shaft / Flywheel / Tuning Control Assembly (knob sold separately) - $35.


Capacitor, 7-Gang Tuning Capacitor ALPS FL526U12 / 7811
(string wheel sold separately) - $55.

Tuning Wheel, Plastic / Nylon Tuning String Wheel / Pulley - $30.


Meters, D'Arsonval / Analog 'Signal Strength' meter, #8B16 - $35.

Meters, D'Arsonval / Analog 'Tuning' meter, #8B11 - $35.


CONCEPT 6.5 STEREO RECEIVER PARTS / SPARES


Transistors / Outputs, Output Transistors Sanyo 2SB697 Original Japanese TO-3, metal cased units. NOT Chinese knock-offs / counter-fits - $25. ea.

Transistors / Outputs, Output Transistors Sanyo 2SD733 Original Japanese TO-3, metal cased units. NOT Chinese knock-offs / counter-fits - $25. ea.

Heat Sink, Aluminum heat sink - $35. ea.


Circuit Board, P-200533 / SEC 6710-9HB Circuit board w/ transistors; 2SA750, 2SC1222, and balance of capacitors, diodes, resistors, and transistors (control pots sold separately) - $55.

Circuit Board
, P-200534 Driver / Power Amplification Circuit Board with transistors 2SA1019, 2SB631, 2SC536, 2SC2362
, 2SD600, and balance of capacitors, diodes, resistors, variable resistors, and transistors (output transistors and heat sinks sold separately) - $65.

Circuit Board
, P-200535 Driver / Power Amplification Circuit Board with transistors 2SA1019, 2SB631, 2SC536, 2SC2362
, 2SD600, and balance of capacitors, diodes, resistors, variable resistors, and transistors (output transistors and heat sinks sold separately) - $65.

Circuit Board, Headphone Attenuation Circuit board with a balance of resistors - SOLD / MIA


Circuit Board, P-200509 / SEC 2142-94V 1 Circuit board w/ transistors; 2SC945, Hitachi L24, and balance of capacitors, diodes, resistors, and transistors - $25.

Circuit Board, Circuit board P-200539 w/ resistors - $20.


Circuit Board, Circuit board SEC 2142-94V 1 / P-200537 w/ transistors; C945, and balance of capacitors, diodes, resistors, and transistors (control switches sold separately) -SOLD / MIA

Circuit Board, Circuit board SEC 6710-94HB / P-200576 w/ transistors; C923, and balance of capacitors, diodes, resistors, and transistors (control switches sold separately) - SOLD / MIA

Circuit Board, P-200532 / SEC-6710-94HB Circuit board w/ transistors; 2SC1400, 2SA750 and balance of capacitors, diodes, resistors, and transistors - $25.

Circuit Board, P200514 / SEC-6710 94VHB Main Tuner Board w/ IC chips; Sanyo LA1230, LA3350 transistors; 2SA844, 2SC535, 2SC536, 2SC929 and balance of capacitors, diodes, resistors, adjustable transformers and transistors - $45.

Circuit Board, P200536 Protection / Power Supply Circuit Board w/ rectifier, diodes and transistors NECF7, 2SD571; and balance of capacitors, 50V 1000 uf capacitors, diodes, resistors, and transistors (NOT including relay) - $55.


Circuit Board, Circuit board SEC-2142-94V 1 / P-200542 w/ Resistors - SOLD / MIA

Rectifier, FULL wave bridge rectifier S5VB. Original Japanese. Not Chinese knockoff / counter-fit - $25.

Relay, DEC Type MS4U / 24VDC - $25.

Transformer, Power Supply Transformer #P-100509TKP0169-7 - $85.

CONCEPT 6.5 STEREO RECEIVER PARTS / SPARES


Capacitors, Power supply filter Caps (63V / 10000uf ) - $30. ea. (will be re-tested prior to shipping)

Jacks / Terminals / Connectors, ‘Main In’, ‘Pre Out’, ‘Tape Out Mon 1 (Out, In)’, Tape Out Mon 2 (Out, In)’, ‘Phono Mag’, (entire section as one assembly including fixed circuit board P-200576) - $50.

Jacks / Terminals / Connectors, Speaker Outputs / Terminals A, B, C (barrier strip style) for (bank of 4) - $30. each bank.

Jacks, ‘Headphone Jack 1’ - $25.

Jacks, ‘Headphone Jack 2’ - $25.

Jacks / Terminals / Connectors, Antenna connectors / barrier strip ‘FM’, ‘AM’, ‘Ground’ (as one assembly) - $25.

Jacks / Connecters, ‘AC Convenience Outlets’ - $20. ea.

Fuse Holder, AC Mains Power Fuse Holder (cap sold separately) - $20.

Fuse Cap, AC Mains Power Fuse Cap - $25.

Post
, Ground post / terminal for phono - $20.

Panel / Plate
, Rear sheet metal panel, less components - $45.

Feet set of 4 - $35. or $18. ea.

Panel, Bottom panel w/o feet - SOLD

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, East, Inside Island, Simplicity, Drawer 2, Right side. - REVISED 3/18/19


 

 

 

      

NEW LISTING
1/3/20

(Click on above thumbnails to enlarge photos)

DYNACO STEREO 120 / ST120A POWER AMP PARTS / SPARES

Powered-up. No excessive current draw .425mA to .500mA. Parted out due to 'distorted sine wave on one side'. Troubleshot for a few hours then moved on.


Bonnet / Top Plate / Panel / Cover / Lid, BLACK. No rust, dents, etc $45. (Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Bonnet / Top Plate / Panel / Cover / Lid, BROWN. No rust, dents, etc $45. (Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Chassis / Bottom, Nickel plated, metal chassis. Typical surface pitting / corrosion - $35. ea.


Switches / Selectors, Lighted, 'Power' "Rocker" switch w/ Neon bulb a and dropping resistor. 125V / 3A
- $35. ea. (2 Instock)

Circuit Board, Power Supply Circuit Board fully populated with transistors, capacitors, diodes and resistors and mounted on black, aluminum heat sink w/ RCA 574844 TO-3 transistor - $55. 2 IN STOCK

Circuit Board, Power Amplifier / Amp Driver Circuit Board fully populated with transistors, capacitors, diodes and resistors and mounted on black, aluminum heat sink w/ output transistors (TO-3) (These boards have likely been service in the past, so are being sold in 'as-found' condition and assume they will need further service work, but the boards are in good 'physical' condition and most of their components likely work fine - $55. 4 IN STOCK


Transformer, Power Supply Transformer, "TRESCO FA704 / (6802 stamped on bottom of leaves)". White, 'Inked' identifiers. Dusty w/ slight surface corrosion. Red, PVC primary wires. Secondary's; Cloth 'Herringbone' Black / Yellow, PVC Black, PVC Purple & Purple / White. Works. - $65.

Transformer, Power Supply Transformer, "DYNACO 464001 FA70473 / 3527304" (probably "Essex" built). Embossed identifiers. Dusty w/ slight surface corrosion. Red, Cloth primary wires. Secondary's; Cloth, Black & Black / Yellow, Brown & Brown / Yellow. Works. - $65.

DYNACO STEREO 120 / ST120A PARTS / SPARES


Capacitors*, Original, "DYNA LONG LIFE", GREEN, Electrolytic Capacitor, C7 / #283338 from service manual (3,300 MFD / 50-60V). Wrapped w/ 'choke / coil' wire. Made in Scotland. - $15. ea. w/ mounting clamp.

Capacitors*, Original, "DYNA LONG LIFE", SILVER, Electrolytic Capacitor, C7 / #283338 from service manual (3,300 MFD / 50-60V). Wrapped w/ 'choke / coil' wire. Made in Great Britian. - $15. ea. w/ mounting clamp. 2 INSTOCK

Capacitors*, Original, "DYNA LONG LIFE", GREEN, Electrolytic Capacitor, C9 / #284108 from service manual (1,000 MFD / 100V ). Made in Scotland. - $15. ea. w/ mounting clamp.


Capacitors*, Original, "DYNA LONG LIFE", GREEN, Electrolytic Capacitor, C11 / #284507 from service manual (1,000 MFD / 100V ). Made in Scotland. - $15. ea. w/ mounting clamp.


Capacitors*, Original, GENERAL INSTRUMENTS Electrolytic Capacitor, BLUE, (short, fat can) C12 / #284338 from service manual (3,300 MFD / 100V ). Made in USA. - $15. ea. (bulging on bottom) w/ mounting clamp.

Capacitors*, Original, "DYNA LONG LIFE", GREEN Electrolytic Capacitor, BLUE, (short, fat can) C12 / #284338 from service manual (3,300 MFD / 100V ). Made in USA. - $15. ea. (bulging on bottom) w/ mounting clamp.

Capacitors*, Original, SANGAMD Electrolytic Capacitor, SILVER, C12 / #284338 from service manual (3,300 MFD / 100V ). Wrapped w/ 'choke / coil' wire. Made in USA. - $15. ea. w/ mounting clamp.

* So just be aware that these are 50'ish year old, Electrolytic Capacitors and while they may be still functioning at some level, unless you really want to keep the amp original, I would replace them. As 'newer' capacitors are typically smaller (physically) for like values, you could use these as 'housings' for the new transplants. A bit of an effort, but common when restorations require 'period correct visuals'. Price is essentially for the original capacitor clamps and 'outside housings' (and the trouble to write all of the above)

Jacks / Terminals / Connectors, ‘INPUTS’, Single, ORIGINAL DYNACO RCA jacks - $20. ea.

Jacks / Terminals / Connectors, Speaker Outputs / Terminals Binding posts. Red & Black - $20. / "Red & Black" pair


Fuse Holder, AC Mains Power Fuse Holder (cap sold separately) - $20. 2 IN-STOCK

Fuse Cap, AC Mains Power Fuse Cap, Bayonet mount - $25. ea. 2 IN-STOCK


Feet set of 4 - $15. or $5. ea.
SOLD OUT

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, Southern Island, North Shore, East end, 1st cab (black), 5th / bottom drawer - Revised 1/3/20

 


 

 

 

 
 

MCS 3223
(NEED TO BUILD PARTS MENU)


Location: PB, S. / SW. Center, Brown Hon Cab, 3rd Drawer - revised 12/12/18

 

MCS_3233_STEREO-RECEIVER-PARTS-SPARES

(Click on above thumbnails to enlarge photos)
MCS-3233 STEREO RECEIVER PARTS / SPARES
MCS-3233 PARTS / SPARES

for sale
 Receiver had excessive DC at speaker outputs. We didn't investigate further as we had 'bigger fish to fry'.
Some parts
MAY also fit other MCS Stereo Receivers but we have no definitive info.

 

Bonnet / Top Plate / Panel / Cover / Lid, – SOLD  
(Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Panel
, Face panel with dial glass. Good condition - $55.

Pointer, Dial pointer - $20. may or may not be re-movable ???


LED’s / Lamps / Light bulbs
, AM, FM, Phono 1, Phono 2, Aux - $12. ea.

LED’s / Lamps / Light bulbs
, Power or Stereo - $12. ea.


Diffusion Panel
, Light Diffusion Plexiglass w/ rubber bulb sockets in place - $25.

Knobs / Caps / Buttons / Covers, ‘Volume’ knob - $30. 
 
Knobs / Caps / Buttons / Covers, ‘Tuning’ knob - $30. 

Knobs / Caps / Buttons / Covers, Round ‘Bass’, ‘Midrange’, ‘Treble’, ‘Tone’ / ‘Balance’ - $20. ea.
 
Knobs / Caps / Buttons / Covers, Round 'push' caps for ‘ Power’, ‘Speakers’, ‘Matrix’ & ‘Headphones’ / Push switch caps w/ springs - $15. ea.

Knobs / Caps / Buttons / Covers, ‘Toggle Switch’ caps for ‘Mode’, ‘Tone Defeat’, ‘FM Muting’,  ‘Low Filter’, ‘Scratch Filter’ & ‘Loudness’ - $15. ea.

MCS-3233 STEREO RECEIVER PARTS / SPARES 

Switches / Selectors, 'Power' Push switch PW123-1-1  S-3 TV-3, w/ ‘clamping capacitor’ c .01K,AC125- $30.

Switches / Selectors, Push switches on circuit board for ‘Speakers A‘, ‘B‘, ‘A+B‘, ‘Matrix‘, ‘Headphone‘ as a complete assembly - $45.

Switches / Selectors, ‘FUNCTION SELECTOR‘, ‘FM‘, ‘AM‘, ‘Phono 1‘, ‘Phono 2‘, ‘AUX‘ - $35.


Switches/ Selectors
. Toggle Switches; ‘Mode’, ‘Tone Defeat’, ‘FM Muting’,  ‘Low Filter’, ‘Scratch Filter’ & ‘Loudness’ - $20. ea.

Switches/ Selectors
. ‘Tape Monitor’ Ratcheting Slide Switch on circuit board 4040502060 - $20.

Potentiometer / Control pot
, ‘Volume’ Pot 200k Ohms x2
- $35.
 
Potentiometer / Controls, ‘Bass’, ‘Mid’ & ‘Treble’ pots 100k Ohms x2 - $25. ea
.


Potentiometer / Controls,
'Balance' pot  250k Ohms x 2 Linear Taper
- $30.

Flywheel
, Dial Shaft / Flywheel / Tuning control assembly
(knob sold separately) - $30.


Tuning Whee
l, Tuning String wheel - $20.

Meters
, ‘Signal Strength’ or ‘Tuning’ each - $25.

MCS-3233 STEREO RECEIVER PARTS / SPARES 

Transistors / Outputs, Output Transistors Output Motorola TO3 Transistors 2N3055 or  MJ2955 -$25. ea.

Circuit Board
, Power Amplification / Driver Circuit Board with original Motorola M2N6551, Motorola M2N 6554 driver transistors and Transistors; Motorola LBC557B, Motorola MPS A05 EBCI, Motorola MPS AO5  - $45.

Circuit Board
, Circuit board #TCIAlS 4044000961 w/ transistors; 2SC900.  - $25.

Circuit Board
, Circuit board #TCI ALS 94 V/ 404060 2050 w/ transistors; 2SC900.  - $25.

Circuit Boards
, Main Tuner Board / TUN 700 TCIJ S94V-0 with IC chips; Motorola ML 1310P 7702L, LBC557B, Hitachi 7H2 HA1137W, Hitachi 7H2 HA1151, Transistors; 2SA844, 2SC460, 2SC461,  2SC535, 2SC945 w/ tuning capacitor  - $45.

Circuit Boards
, Tone, Balance, Equalization circuit board w/ transistors; 2SC900 (potentiometers sold separately) - $35.

Circuit Boards
, Power Supply Circuit Board 4046000971 w/ rectifier diodes &  w/ transistors; 2SC945 (less filter capacitors) - $35.

Transformer
, Power supply Transformer ‘4200961378FSLT5M185 (ETP66PU18B) (MAL66A15) - $55.
 
Capacitors, Power supply filter Caps 50V / 6800 uf - $18. ea.

MCS-3233 STEREO RECEIVER PARTS / SPARES 

Jacks / Terminals / Connectors, ‘Phono 1’, ‘Phono 2’, ‘Aux, ‘Tape 1’, ‘Tape 2’ entire section as one assembly - $40.
 
Jacks / Terminals / Connectors, Speaker Outputs / clips / ‘terminals for ‘A&B’ front, or ‘Rear’ speakers’ - $20. each bank of 4


Jacks
, ‘Headphone Jack’ - $25. ea.

Jacks / Terminals / Connectors
, Antenna section ‘FM’, ‘AM’, ‘Ground’ as one assembly - $20.

Jacks / Connecters, ‘AC Convenience Outlets’ - $20. ea.

Fuse Holder, AC mains power / Speaker Protection Fuse holder (cap sold separately) - $20.

Fuse Cap, AC mains power / Speaker Protection Fuse Cap - $25. ea.


Antenna
,  ‘AM Ferrite-Bar Antenna’ w/ swivel clamp (repaired crack, but functional) - $25.

Panel / Plate, Rear sheet metal panel, less components - $25.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, SW group, 2nd cab from center, Black, 2nd drawer.- revised  3/18/19

 

 
 

 

 


 

PHOTOS COMING WHEN PRACTICAL

(Click on above thumbnails to enlarge photos)
MCS 3249 STEREO RECEIVER PARTS / SPARES
#4072

for sale
Some parts
MAY also fit other MCS Stereo Receivers but we have no definitive info.

 

Bonnet / Top Plate / Panel / Cover / Lid, – SOLD  
(Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Panel
, Brushed Aluminum Face plate / panel with dial glass. Good condition - $55.

Panel, Inner, Gray, Plastic Face panel with 'green' digital readout filter'. Includes 'Down' & 'Up' tuning 'rocker' button. Good condition - $30.

MCS 3249 STEREO RECEIVER PARTS / SPARES 

Knobs / Caps / Buttons / Covers, ‘Volume / Balance’ knob set - $35

Knobs / Caps / Buttons / Covers, Round ‘Bass’, ‘Midrange’, ‘Treble’, ‘Tone’, Function’ - $25. ea.
 
Knobs / Caps / Buttons / Covers, Round 'push' caps for ‘ Power’ - $30.

Knobs / Caps / Buttons / Covers, Rectangular 'push' caps for ‘ Tuner Presets’, ‘Memory’, & ‘Scan / Manual’ - $15. ea.

Knobs / Caps / Buttons / Covers, Toggle caps / bats for 'Power, Tape Dubbing’, & ‘Tape Monitor’ - $15. ea.

Knobs / Caps / Buttons / Covers, Rectangular, brushed, silver caps / buttons for; 'Speakers',  ‘Tone Defeat’, ‘FM Muting’, ‘High Filter’, ‘Loudness’, & ‘Mode / FM Muting’, - $20. ea.

MCS 3249 STEREO RECEIVER PARTS / SPARES 


Switches / Selectors, 'Power' toggle switch 3A/ 250VAC, S-1 TV-3, w/ ‘clamping capacitor’ - $35.

Switches / Selectors, Push switches for ‘Speakers A‘, ‘B‘, ‘A+B‘, as a pair on their bracket - $35.

Switches / Selectors, Slide Switch for AM freq selector between 9kHz or 10kHz increments. - $20.


Switches/ Selectors
. Push Switches for ‘Tone Defeat’ &High Filter’ - $35. pair on metal bracket

Switches/ Selectors. Push Switches for Loudness &Mode / Muting’ - $35. pair on metal bracket

Switches/ Selectors. 'Latched', Push Switch for Manual / Scan’ - $25. on metal bracket

Switches/ Selectors. Toggle Switches for Tape Dubbing orTape Monitor’ - $35. ea.

Switches/ Selectors
. ‘Function Selector/ 'Input selector', Ratcheting Slide Switch for ‘AM‘, ‘FM‘, ‘Phono ‘, & ‘AUX‘ - $40.


Potentiometer / Controls, ‘Bass’, ‘Mid’ & ‘Treble’ pots 100k Ohms x2 - $30. ea
.

Potentiometer / Controls,
'Volume / Balance' 'combo' pot  250k x2 Ohms volume and 250k balance, de-tented
- $40.

MCS 3249 STEREO RECEIVER PARTS / SPARES 

Transistors / Outputs, Output Transistors Output NEC 'Epoxy' Transistors 2SB849 & 2SD1110 - $25. ea.
(original Japanese / OEM units. Not cheap, Chinese knock-offs / counter-fits. Tested Good.

Heat-Sink, Power amp, Aluminum heat-sink - $35.

Circuit Board
, Display / Fluorescent tube, NEC FIP7A13A, Tube No. 2F, Readout Circuit board #72914322 W/ IC Chip; NEC EIZ06X-150 / D1703C w/ transistors; 2SA733, 2SC945, 2SK163, and balance of capacitors, diodes, resistors, and devices. - $35. SOLD

Circuit Boards
, Main Tuner / Switch Circuit Board #72914131-1 with IC chips; Hitachi HA11225, NEC C1161C3, Sanyo LA1245, LB1405, 'in-line' packages; M5213L, Transistors; 1SV55, 2SA1175, 2SC535, 2SC945, 2SC1675, 2SC2785, 2SK168, w/ tuning section and balance of capacitors, diodes, resistors, adjustable transformers, pc mounted 'trim pots', and devices  (less potentiometers, Switches, jacks, sold separately) . - $45.

Circuit Boards
, Tone, Balance, Equalization circuit board, 72914122 with 'in-line' packages; NEC UPC1225H, and AN6875 and w/ transistors; 2SC2785, 2SC945  and balance of capacitors, diodes, emitter resistors MPC722 resistors, and devices. (less potentiometers, Switches, jacks, relay sold separately) - $45.

Circuit Boards
, Power Supply Circuit Board 72914122 w/ 6800uF / 50V 'filter capacitors', bridge rectifier diodes & w/ transistors; 2SB647, 2SD667, and balance of capacitors, diodes, resistors, and devices. - $40.

Circuit Boards, Phono Pre-Amp? Circuit Board 72914131-2 w/ 'in-line' packages; M5213L and balance of capacitors, diodes, resistors, and devices. - $35.

Circuit Boards, 'Tuner Preset' / Switch Circuit Board 72913121-1 w/ 'momentary' switches, however, some of the switches are 'sticky'. Most are fine. - $20. as is

Circuit Boards, 'LED Power Meter' Circuit Board 72914141-2 w/ LED's. - $25.

Circuit Boards, 'LED Signal Strength Meter' Circuit Board 72914131-3 w/ LED's. - $25.

Relay, Speaker protection relay TYPE AP2U / 24VDC - $25.


Transformer
, Power supply Transformer 45006129 / TKP0212-E1 - $45.

MCS 3249 STEREO RECEIVER PARTS / SPARES 

Jacks / Terminals / Connectors, ‘Phono’, ‘Aux, ‘Tape 1’, ‘Tape 2’ either section / bank of six RCA's - $30. ea. bank
 
Jacks / Terminals / Connectors, Speaker Outputs / clips / ‘terminals for ‘A&B’ front, or ‘Rear’ speakers’ - $30. each bank of 4


Jacks
, ‘Headphone Jack’ - $25.

Jacks / Terminals / Connectors
, Antenna section ‘FM’, ‘AM’, as one assembly - $25.

Jacks / Connecters, ‘AC Convenience Outlets’ - $25. pair

Antenna
,  ‘AM Ferrite-Bar Antenna’ w/ swivel clamp - $35. complete

Panel / Plate, Rear sheet metal panel, less components - $25.


Feet, Set of 4 feet - $25.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

 Location: PB, SW group, 3rd cab from center, Black, 3rd drawer, right side.- revised  3/18/19

  

         

MILLER & KREISEL / M&K POWERED SUBWOOFER
M&K MX-90 / MX90 SUBWOOFER PARTS / SPARES / REFERENCE
This is a listing of 'Significant' parts for cross-reference ONLY. We made notes of these more 'significant' parts while refurbishing a M&K MX-90 subwoofer for re-sale. We do not have this unit available for parts, this information is ONLY for cross-reference.



Potentiometer / Controls; Level / Volume control pot is 'Audio Taper' / 50K Ohms - Reference info ONLY

Potentiometer / Controls; Roll-off / cross-over point control pot is 'Linear Taper' / 10K Ohms - Reference info ONLY

Filter Capacitors; Dual 50Volt / 10,000uF - Reference info ONLY

Outputs / Output Chip; STK4048V - Reference info ONLY

IC CHIPS / INTEGRATED CIRCUIT CHIPS; Texas Instruments / TI LM348N - Reference info ONLY

Woofer / speaker / driver / sub-woofer; Click here for any 'stock status' 


Again these parts are not available from this unit so we do not have them, nor know who might have them. This unit was not parted out and was sold complete.


 




NEW LISTING 1/10/14
(Click on above thumbnails to enlarge photos)

NAD 1600 PREAMP / TUNER PARTS / SPARES
NAD 1600 PARTS / SPARES

for sale

Some parts
MAY also fit other NAD Stereo Tuners, Pre-amps, Receivers but we have no definitive info.
 - PARTING OUT -
 
 Bonnet / Case / Cover / Cabinet, Sheet metal case / cover some scuffing / scratches - SOLD  

Panel, Front / Face panel, black plastic, decent condition w/ minor edge dings / tics and lower left corner ding (less selector caps / buttons, sold separately) - $45.

Knobs / Caps / Buttons / Covers, ‘Volume’ knob #5541537900 - $30. 

Knobs / Caps / Buttons / Covers, ‘Balance’ knob #5541538000 - $20.

Knobs / Caps / Buttons / Covers, ‘Tuning’ button / cap #5541537600?- $20. ea.

Knobs / Caps / Buttons / Covers, ‘Search’ button / cap #5541537600? - $20. ea.
SOLD  

Knobs / Caps / Buttons / Covers, ‘Bass’ or ‘Treble’ Control knob #5541537510 - $20. ea. 1 Remaining in stock


Knobs / Caps / Buttons / Covers
, ’Tone Defeat’ push button switch cap #5541537700 - $15. SOLD? / MIA?

Knobs / Caps / Buttons / Covers
, ‘Power’ push switch cap – green #5541537200   - $25.

Knobs / Caps / Buttons / Covers
, ‘Copy’ toggle switch cap #5531537800 - $20.

Knobs / Caps / Buttons / Covers
, ‘Pre-set’, ‘Bank’ switch cap / push knob with springs, 1-7 #5541537100 - $15. ea.

Knobs / Caps / Buttons / Covers
, ‘Enter’, switch cap / push knob, (red) #5541537110 - $20. ON HOLD FOR POTENTIAL SHOP UNIT

Knobs / Caps / Buttons / Covers
, ‘Mono’, ‘AM’, ‘FM’, ‘FM Blend’, ‘Tuning’, ‘Tape’ 1 and 2, ‘ Phono’. ‘Video’,  ‘CD’, ‘Low Level’, push button / cap #5541537300 - $15. ea.

Display / LED
, ‘EPL’, ‘FM Stereo’, pair, yellow led on small circuit board - $20.

NAD 1600 PREAMP / TUNER PARTS / SPARES


Potentiometer / Control
, ‘Volume’ control pot, 042F 20KBX2, stacked with remote control motor (has issue. Half of ‘split shaft’ broken away, but pot and motor still function) - $40.

Potentiometer / Control
, ‘Balance’ pot 024F20KW - $30.

Potentiometer / Control
, ‘Bass’ pot 034 V5KBKx2 - SOLD

Potentiometer / Control
, ‘Treble’ pot 022F V10KBX2 - $25.

Switches / Selectors, ‘EPL’ push switch (less cap, sold separately) - $25.

Switches / Selectors, ‘Bass EQ’ or ‘Loudness’ push switches (less caps, sold separately) - $25. ea.

Switches / Selectors, ‘Tone Defeat’ push switch (less cap sold separately) - $25.

Switches / Selectors, 'Power', ‘Frequency Preset’. ‘Enter’, ‘Mono’, ‘AM’, ‘FM’, ‘FM Blend’. ‘Tape 1-2’,Phono’, ‘Video’, ‘CD’, ‘Low Level’, ‘Tuning’, ‘momentary’ / Push micro switches, ALPS S701-S711 #5054512940 (less caps, sold separately - $15. ea. (only available till ‘Remote / Display / Remote Control’ circuit board #5553131401 sells)

Switches / Selectors, ‘Copy’, ALPS Toggle switch on circuit board - $30.

Switches / Selectors, ‘Infrasonic’ slide switch - $20.

Switches / Selectors, ‘Search’, push switch (less cap, sold separately - $20.

Switches / Selectors, ‘MM / MC’ phono cartridge slide switch- $20.

NAD 1600 PREAMP / TUNER PARTS / SPARES


Transformer, Power supply Transformer #5561317020 / 24D043HD TAM - $55.

Circuit Board, ‘Tone Control’ / ‘Power Supply / Rectifier’, circuit board #5553132500 with transistors; 2SA817A,  2SC1959, 2SC1627A, IC NEC PDP636OC, JRC 8240, Relay Takamisawa VS-12MB (12VDC / 10A.), Bridge Rectifier W01M/9013 and with balance of capacitors and resistors,
(less switches and pots) - $45.

Circuit Board
, ‘Remote / Display / Remote Control’ circuit board #5553131401 with LED Digital Display / Readout, transistors; 2SA1015, 2SC1815, IC’s: M74HC164B1, NEC D7.507CU, Toshiba TD63001AP, LED’s, push switches. ‘Enter’, ‘Mono’, ‘AM’, ‘FM’, ‘FM Blend’. ‘Tape 1-2’,Phono’, ‘Video’, ‘CD’, ‘Low Level’, ‘Tuning’, with Push micro switches, ALPS S701-S711 #5054512940, green, clear, yellow, & red LED’s and balance of resistors, capacitors diodes etc. - $65.

Circuit Board
, ’Pre-amp’ circuit board #5553132700, with transistors; 2SA1015, 2SA3329, 2SC1815, 2SC3329, 2SC2878, FET 2SK363, voltage regulators 2SB349A, 2SD689A, IC NEC PD6362C, JRC 8240 & 9002B, IC HCF4001BE, In-line package LB1645 and balance of capacitors,0-\ resistors,
(less I /O jacks, switches, pots) - $65.

Circuit Board
, ‘Tuner’ / ‘Power Supply / Rectifier’ circuit board #5553131601, with transistors; 2SA562, 2SA1015, 2SC1815, 2SC1959, FET SK363, 2S930 EOC, Voltage Regulators MC78MOSC, MC78M15C, Horizontal in-line package Toshiba TD6104P, TA7060AP, BA6104, LB1450,  IC’s Toshiba TC9147BP, LA1245, LA1235, LA3401, HCF4001BE, Mitsumi tuning circuit and balance of resistors, small transformers and capacitors - $65.

NAD 1600 PREAMP / TUNER PARTS / SPARES


Jack
, Headphone Jack - $20.

Jack / Connector, RCA Input / Output, ‘CD’, ’Video Sound’, ‘Tape 1, Tape 2’ - $30. ea. set of 2 pair

Jack / Connector, ‘Convenience’ AC outlet / sockets - $20. ea.

Jack / Connector, ‘ELP’, ’Pre-out’, RCA Input / Output, 3 pairs, mounted on small circuit board with balance of capacitors and resistors - $35.

Jack / Connector, ‘Phono’, RCA Gold Input - $30.

Jack / Connector / Clip, ‘Antenna’ pair on small circuit board - $20.

Jack / Connector / Clip
, ‘Antenna’ pair on small circuit board - $20.

Jack / Connector, ‘FM’ 75 Ohm antenna input fitting - $15.
 
Foot / Feet, foot set for all 4 - SOLD

Panel, Rear sheet metal panel (less any input / output jacks / components) - $25.
 
Panel, Bottom sheet metal panel - $
SOLD

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, Left-South Side, 3rd cab from left, 2nd pink, 4th drawer, right side.- revised  11/29/22

 


NEW LISTING 2/4/18
(Click on above thumbnails to enlarge photos)
SHARP / OPTONICA SA-5406 / SA5406 STEREO RECEIVER PARTS / SPARES
- PARTING OUT -

Face panel with glass (less knobs / buttons) Decent condition. Black anodized aluminum. - $65.

Dial Slide Rule panel
, Silk-Screened dial panel, Brushed aluminum - $35.

Bonnet / Case / Cover / Cabinet, SOLD

Knobs-Buttons-Caps, Tuning knob, Black Anodized, Milled aluminum - $35.

Knobs-Buttons-Caps, 'Volume' knob Black Anodized, Milled aluminum  - $35. SOLD / MIA?

Knobs-Buttons-Caps, 'Selector' for Speakers or Input Selector
knob Black Anodized, Milled aluminum  - $30. ea.


Knobs / Caps / Buttons / Covers, ‘Balance’, ‘Bass’, ‘Treble’, round knobs
Black Anodized, Milled aluminum - $35. ea.

Caps / Buttons, ‘Toggle Switch’ button / cap / bat for 'Power', 'Low Cut', 'High Cut', 'Mode', 'Loudness', 'Hi-Blend', 'FM Muting', 'Air Check', 'Dubbing', 'Tape Monitor'
Black Anodized, Milled aluminum - $20. ea.

LED, 'Protection' LED on circuit board - $20.

LED, 'FM Stereo' LED on circuit board - $20.

LED, 'Optilock' LED on circuit board - $20.

Indicator / Pointer, Dial pointer / indicator / needle - $20.

Flywheel, Tuning flywheel assembly - $25.

Wheel, Tuning String wheel (plastic) - $25.


Meters, D'Arsonval / Analog 'Tuning', #41517 - $35.

Meters,
D'Arsonval / Analog 'Signal Strength', #41518 - $35.

Diffusion Bar, Dial Light Plexi-glass 'diffusion' bar (lamp sockets / bulbs no included) - $30.


Lamp / Bulb Sockets, Dial diffuser rubber bulb sockets (used in numerous units, including maybe Pioneer) - $15. ea.


SHARP / OPTONICA SA-5406 / SA5406 STEREO RECEIVER PARTS / SPARES

Switches / Selectors, ‘Tape Monitor’ SW203 'Toggle' switch
(caps sold separately - $35.

Switches / Selectors, ‘Tape DubbingSW202 'Toggle' switch
(caps sold separately - $35.

Switches / Selectors, Push Switch, 'Subsonic', 'Tuning Mode', 'Mode / FM Muting’, 'FM 25us', 'Tone Defeat' or 'Loudness' push switch
(cap sold separately) - $25. ea. (due to removal difficulty)

Switches / Selectors, Toggle Switches; 'Low Cut', 'High Cut', 'Mode', 'Loudness', 'Hi-Blend', 'FM Muting', 'Air Check'
(caps sold separately) - $30. ea.

Switches / Selectors, Input / Function 'Wafer' Switch, 'AM', 'FM, 'PHONO-1', 'PHONO-2', & 'AUX'
(knob sold separately) - $55.

Switches / Selectors,  Switch, 'Speaker'
(cap sold separately) - $25. ea. (due to removal difficulty)

Switches / Selectors, 'Speaker Wafer Switch', 4631920
- $35.

Switch
, Toggle Power Switch Noble - $30.
SOLD

Switch, Push 'Audio Muting' switch - $30.
SOLD / MIA?

Control Potentiometer / Control
, Volume Control Pot - $40.
SOLD / MIA?

Control Potentiometer / Control
, ‘Bass’, Treble’, control pots, Noble - $35. ea.

Control Potentiometer / Control
, Balance Noble - $35.


SHARP / OPTONICA SA-5406 / SA5406 STEREO RECEIVER PARTS / SPARES

Transformer, Power supply Transformer TKK P0608AF / TKP0179-6 - $65.

Capacitors, Power supply filter caps, Nichicon 56wV / 15000uf
- $25. ea. (will be re-tested prior to shipping)

Output Power Packs, Power amplifier output devices, STK0070-II - $35. ea. (will be re-tested prior to shipping)

Chip Device, Voltage Amplifier STK3082 - $35. ea. (will be re-tested prior to shipping)

Heat sink, Aluminum Heat sink - $25. ea.

Relay, Fujitsu FRL-264 - $25.

Circuit Boards / Cards, Power Supply Circuit Board Sharp H13A 94V-1 / F0758AF
(less Filter Caps, but with balance of components including rectifier diodes, capacitors, resistors etc.) - $35.


Circuit Board, ‘Main power amp / Speaker protection’ circuit board assembly, F0901AF with IC Chips: Hitachi HA1457, HA12002,
(less output devices, heat sink, user controlled potentiometers / controls, switches / selectors, relays, 'STK Voltage Amplifier STK3082) but with balance of transistors, resistors, capacitors, diodes, voltage regulators, connectors, and PC mounted pots / variable resistors - $85.

Circuit Board, ‘Tuner PCB’, circuit board
Sharp H13A 94V-1, w/ 6-gang tuning capacitor #RCV-C0058AFZZ with transistors: 2SA872, 2SC458, 2SC460, 2SC535, 2SK117, IC's; Hitachi HA1137W, HA1151, HA1196, and balance of other transistors, capacitors, diodes, PC mounted 'variable resistors', adjustable transformers, tuning capacitor, connectors and resistors (less toggle and wafer switches) - $65.

SHARP / OPTONICA SA-5406 / SA5406 STEREO RECEIVER PARTS / SPARES

Jacks / Terminals / Connectors, 'Phono-1' / 'Phono-2' RCA Input jacks / connectors all mounted on circuit board - $35.

Jacks / Terminals / Connectors,  'Tape-1' RCA I/O jacks / connectors all mounted on circuit board - $35.

Jacks / Terminals / Connectors,  'Tape-2' RCA I/O jacks / connectors all mounted on circuit board - $35.

Jacks / Terminals / Connectors,  'AUX' RCA input jacks / connectors - $25.

Jacks / Terminals / Connectors, ‘Head Phones’ - $25.


Jacks / Terminals / Connectors / Clips, ‘Speaker output’ terminals, 2 banks of 2 pairs each mounted on single strip - $30. ea. bank of four


Jacks / Terminals / Connectors, AC ‘convenience’ outlets - $25. pair


Antenna, Antenna ‘terminal’ post strip with binding posts - $30.

Antenna, Bracket, AM antenna bracket / socket - SOLD WITH ANTENNA BELOW
SOLD

Antenna, Ferrite stick antenna w/ ball socket arm and receiving socket w/ small circuit board attached as an assembly - $40. w/ 'Ball arm' attached
SOLD

Feet, Set of 4 Feet - $25. set.


Panel, ‘Rear’ (sheet metal only, less connectors, Jacks / Terminals / Connectors, terminals & components) - $30. 


Bottom panel w/o feet - SOLD

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, South, Center Island, 2nd from left cab / tan, 3rd drawer - Revised 9/9/19

 


 



McIntosh_MR71_MR_71_Stereo_Tube_Tuner_Used_web.jpg (30792 bytes)           McIntosh_MR71_MR-71_FM_Tube_Tuner_Replacement_Front_Glass_web.jpg (24865 bytes)

REPLACEMENT FRONT 
GLASS FOR THE
McIntosh
MR-71 MR71

Stereo FM Tube Tuner
We have new, re-production  front panel glass plates for the MR71 MR 71 tuner.
These are no longer available from McIntosh.
They are cut to the original size and finished using black enamel (more durable than the original bubbling ink that was used). Looks GREAT!
NEW
$119. ea.
SOLD OUT

(Any jagged appearances is only due to digitization / compression in photo,
actual glass panel has perfectly straight edges!)

Sorry we don't have the dial glass with the Silk-screened "McIntosh - MR71 STEREO FM TUNER" and the station numbers.

 

-
HOME / STUDIO / HI-FI SPEAKER PARTS
CLICK HERE!

-

REEL TO REEL TAPE DECKS RECORDERS PARTS AND PARTS UNITS

 


Concertone_Reverse-O-Matic_Reel-to-Reel_Tape_Deck_web.jpg (41041 bytes)   

(Click on above thumbnails to enlarge photos)

Concertone Reverse-O-Matic
Reel to Reel Tape Recorder / Deck
802A
Reel-Reel Deck PARTS

for sale
Parting out. Motors work.
Heads, Pinch Roller and 
Capstan Sleeve - SOLD

ALL SOLD

Replacement AC cord / Mains Cable For Concertone Reel to Reel Tape Decks and Concertone Tube Pre-Amps Replacement AC cord for Concertone 508, 508-1, 801 and 802, as well as Berlant Concertone 20/20 Series 30 Reel-to-Reel Tape Recorder Preamp 20/20 Recording Amplifier TWA,
Click Here...


- -

TURNTABLES / CD PLAYERS
-
-
-
EQUALIZERS / SIGNAL PROCESSORS / EFFECTS
 

 

-
-

HOME / STUDIO / HI-FI SPEAKER PARTS
CLICK HERE!

 
MISC PARTS
MISC / ORPHANED CIRCUIT BOARDS AND RELATED PARTS

Circuit board - Sanyo mfg board,  #1AD4B10C2460AB / T002 / 94V-0 featuring parts;

Relay, DEG Relay OSA-SH-212DM3 12VDC / 5A 50VAC / 3A 125VAC / 30VDC - $20. ea.

Capacitors, Filter Capacitors, Rubicon 80V / 5600uF / mF - $15. ea.


Transistors, 2SA1020, 2SA1207, 2SC2909, 2SD1468, 2SA933, J349, K1420, JRC 7812A, 79M12A, JRC OP-AMPS NJM4558L
 Rectifiers RBV-602, (most of these parts will be pulled for use by Oak Tree Vintage)

Mitsubishia DA-FG20
Circuit board, #AFT-33 / 241A145 featuring tuning capacitor, AM 'Stick' antenna, transistors; 2SA826, 2SC461, 2SC710, 2SC1740, 2SD360,  K55, K68A, and IC chips; Hitachi HA1197, 4400, 4420B, and balance of mounted components
(less switches & pots) - $45.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

 

----
--

Unless specifically noted, we do not typically sell 'component level' parts such as resistors, diodes, transistors, semiconductors, ic's / integrated circuit chips, ceramic capacitors, led's, bulbs, lamps, belts, etc. We do commonly sell circuit boards / cards which will likely come with those parts attached.
 
 
 


 


 

LINKS TO OUR 'HI-FI' DEPARTMENTS

Amps and
Pre-Amps

Receivers

Cassette
Decks

Tuners

Turntables

8-Track Decks

CD Players

Reel-Reel
Decks

EQs and Signal
Processors

Speakers

Betamax and
VHS VCRs

Turntable Cartridges

Tube Audio

Ne'cessories

Speaker Parts

Record Players

Vintage Radios

Vintage
Walkmans

Headphones

Stereo Parts


Wondering where the "tone" you remember went?....


 

.... Surround yourself with Silver and find it again!


CONTACT INFO BELOW

$20. MINIMUM ORDER

 

                                             

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.


    Before calling, PLEASE read the text in below.      
 BEFORE
CALLING

(800) 806-4231 EXT #1
~10:00 AM- ~5:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE


OR

BEFORE EMAILING
 
parts@oaktreevintage.com

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

We DO NOT have your part unless the following conditions are met:

A) You HAVE SEARCHED our page(s) and HAVE FOUND the part you are looking for SPECIFICALLY listed on one of our pages or you have solid information that it's a 'bona fide' substitution for your part (unless noted already, we won't have any further info along those lines)
AND
B) The part that you have found is NOT marked as SOLD or SOLD OUT.


If you do NOT see it listed after thoroughly searching the pertinent page
(likely the page you landed on originally),  
we do not have it,   
nor do we know when
it might come in,   
nor do we maintain "waiting lists" for parts,    
nor do we know who
might have it.

Sorry, but phone and email traffic for parts
we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.


 We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!


ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT
lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms may automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings".
We do not return calls / emails for requests for parts we don't show / or have available (we may choose contact with further, useful information).


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |  KEYBOARD PARTS 

___________________________________________

Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.


Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |   SELLING-TRADING-CONSIGNING   |  KEYBOARD PARTS   I   FAQ'S  
  CONDITION RATINGS   |   ORDERING / POLICIES    |    WARRANTIES / RETURNS   |   SHIPPING     
 RESTORATION PROCEDURES   |   REPAIRS  | CONTACT PARTS


As much of the price charged for parts is for the 'time to extract' from it's donor unit, unless we send the 'wrong part', parts are NOT returnable.
See our "
Warranties / Returns" page via the link below for more details.


POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately
. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent
research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
 

Copyright © 1997-2023 Oak Tree Enterprises, LLC

COPYRIGHT INFORMATION


 

 



 


Again,
Due to limited resources we are only able to do restorations / repairs on OUR OWN inventory
and unable to take OUTSIDE / CUSTOMER repairs.
   If you need work done to your gear,  TRY SOME OF THESE RESOURCES

_____________________________________________________________________________________________________