Categories

Home
Hi-Fi / Stereo Gear
Speakers
Receivers
Tuners
Amps / Pre-Amps
EQs / Signal Procs
Cassette Decks
Reel - Reel Decks
Turntables
Cartridges
8 Track Players
Headphones
Speaker Parts
Stereo Parts
HI-Fi Accessories

Customer Care

Contact Us
Repair Resources
Restoration Steps
 

Purveyors of Electronic, Musical and Vintage goods from then, now and in between. 
Since 1982.

REALISTIC STEREO PARTS / SPARES - USED

 

Realistic Stereo Parts / Radio Shack Stereo Parts for models such as Realistic STA-65C / STA65C, STA-120 / STA120, Realistic STA-2300 / STA2300 for reference and occasional sale.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Note about parts / spares sales

* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.

Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.

Parts, general condition / circuit board condition; Most of our parts are from 'salvage / donor' units. While we don't sell parts that are 'known' to be bad, occasionally parts will need further adjustment, cleaning, 'tweaking', or in the case of circuit boards, may need old, conductive glue / epoxy further cleaned, and some 'common' parts / components such as, aging / leaky capacitors, parts whose values have drifted, and some epoxy transistors may need to be replaced due to 'green / black / furry' legs, or because those parts were marked as 'sold separately'. Some circuit boards may have 'tired' "landing / solder pads", or severed traces, or cold / bad solder joints which can require solder re-flow or 'jumpers'. Unless noted, circuit boards will be 'crack / split / break' free.

Parts pricing; Most of our parts price / value will be based on a few things. Firstly, we are in the restoration / refurb business, so we consider what we would be willing to pay for the part if we needed it (which again, is what the parts are listed for in the first place, "our units"). Secondly, the rarity / value of the unit the part(s) fit. The 'Tuning Knob' for a receiver that has a final value of $350 will likely be much less than the "Tuning Knob" for a unit with a final value of $1500 or more (a set of tires for a typical sedan will be $400 to $600. A set for a Lamborghini can be $16,000). Thirdly, the 'rarity' of the part. Forth, the 'condition' of the part. Fifth, the difficulty to extract the part, or success rate for extracting certain parts. Sixth; frankly it's a LOT of work and time to part out a unit. Most take 1 to 3 days of shop time to process. Not only the disassembly, but the 4-15 hours of pre-testing / servicing and just as time consuming can be the amount of time it takes to do all of the research we do and the info we list on many parts for cross-referrencing to other units that my use the same parts by scouring service manuals. On many circuit boards we will list every 'semi-conductor' which is also very time consuming. Lastly, every call or email for a part can require 20 minutes to sometimes over an hour of 'phone support', often (about 70% of the time) with me convincing the potential purchaser that they don't need the part I have to solve their problem.
Sorry to sound like a "whiner" about selling parts, but "time is money".

Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' and most are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are commonly 'disproportionate' to their cost, typically nearly equal to and sometimes greater than the cost of the part.  Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight so are commonly just as expensive as shipping a 'complete unit'. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive).  It is what it is....

A non-response to an email of phone call / voice message request for a part that we don't show on one or our pages, or is already marked "SOLD" will be typical. We simply don't have the time / man-power resources to respond to every query we get for items we don't show as avail. Most folks get that. Having said that, I / we may respond if we have information on a substitution or other useful information relating to it.

A non-response to an email of phone call / voice message request for a part (we may appear to have, but typically 'highlighted in Orange or Yellow'), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale.  Also, parts requests can occasionally take time for us to respond to. While we may have a part listed, and we like to keep the website 100% accurate, occasionally a part will be 'used by us' or 'previously sold' and we by oversight, and we did not get the web listing marked "SOLD", or the part gets  'mis-placed' or 'lost' (laid down somewhere in the warehouse(s) and then it get's lost track of (that happens to our coffee cups all the time, then we find it months later with 'a good batch of 'penicillin' growing in it), so we like to 'lay eyes on it' prior to responding. Sometimes we just can't figure out which cabinet or drawer parts were assigned to (and we're working on a system for that one).

Some folks email / call and want us to respond either way / whether we have the part or not. Again, we simply do not have the time resources to do that. Our time must be utilized on the requests we can fulfill. 
Sorry for all the excuses, but that's how the 'system' (or lack thereof) works.
And, if you don't see it, we likely don't have it.
 Thank you for your understanding.

$20. MINIMUM ORDER



20% off sale on salvage stereo parts.


See sales banners on parts pages for details


Most of these components are "take-outs" from stereo gear that for various reasons we 'chopped' and unless otherwise noted are in serviceable / working condition / shape!
   In the case of output transistors, they will be tested / checked prior to posting and once again prior to shipment, pots / switches will be 'cursory' cleaned, parts already missing / utilized from circuit board will be noted, transformers will be checked prior to posting. Filter capacitors  will be tested / checked prior to posting and once again prior to shipment and 're-conditioned' / 're-formed' if necessary.

MOST OF THE PARTS LISTED BELOW ARE FROM SALVAGE UNITS.

 



 

REALISTIC STA-65C PARTS UNIT

(note: Vol caps NOT interchangeable with STA-120. The fader levers are too wide. Modification would be difficult)

 

 



NEW LISTING 2/3/18
(Click on above thumbnails to enlarge photos)

RADIO SHACK / REALISTIC STA-65C / STA65C STEREO RECEIVER PARTS / SPARES

- PARTING OUT -

Bonnet, Wood case cover
bonnet. Walnut wood veneer. Decent cond. with no distractions. - $SOLD

Panel, Face panel (less knobs / buttons / wood end caps) - $45. Decent

Panel, Dial Glass panel - $35.

Holder / Socket, Dial lamp / bulb socket / holder - $20. ea. (if bulb is included, it's functionality not guaranteed)

Pointer / Indicator, Dial Pointer / needle - $35.


Knobs / Caps / Buttons, Tuning knob - $30.

Knobs / Caps / Buttons, round Tone / Function-Selector / Bass / Treble knobs - $20. ea.

Knobs / Caps / Buttons
, Volume
knobs / caps for linear faders, 'Left'
('set screw' determines side and set screws go to 'inside') - $25.

Knobs / Caps / Buttons
, Volume
knobs / caps for linear faders,
'Right' ('set screw' determines side and set screws go to 'inside') - $25.

REALISTIC STA-65C / STA65C PARTS / SPARES

Switches
, Toggle switch, DPDT 'Tape Monitor', 'Stereo / Mono', 'Hi-Filter', 'Loudness' switch
- $25. ea.

Switches, 'Speaker' wafer switch
 - $35.

Switches, 'Power' push switch, APLS AC125V/3A / UEH12BF
w/ gray plastic push cap / button - $35.


Potentiometer / Controls, 'Treble' or 'Bass' (tone) Pot Control Alps 50kΩAX2 - $35. ea.

Potentiometer / Controls, Internal 'adjustment' pot, ALPS, 1kOhms -  $25.

Potentiometer / Controls,
Volume Pots, Alps, linear faders, ALPS 100kX2 -
$25. ea. L&R are the same - $40. ea. 1 REMAINING

Capacitors, Variable Tuning Capacitor, on circuit board 1013 with balance of resistors, variable transformers, capacitors, transistors etc (less 'string' wheel) - $35. for assembly


Flywheel, Dial Shaft / Flywheel / Tuning control assembly
(knob sold separately) - $25.


Wheel, Tuning String / Dial wheel (steel wheel) - $20.


Meters
, Tuning Meters
- $25.

Meters, Signal Strength - $25.

REALISTIC STA-65C / STA65C PARTS / SPARES

Circuit Boards
, 'Driver' Circuit board, 6007 w/ choke; 35800014, transistors; 2SC696 & Hitachi 2SC458, and balance of resistors, capacitors, diodes etc. - $35. ea.

Circuit Boards, 'Tuner' Circuit board, 3008 w/ balance of transistors, variable transformers, resistors, capacitors, diodes etc. - $35.

Circuit Boards, 'Tuner' Circuit board, 2008 w/ IC chip; Hitachi HA1113 and transistors; Hitachi 2SC458, 2SC460 and balance of variable transformers, resistors, capacitors, diodes etc. (small chip in one corner, but won't affect functionality) - $35.

Circuit Boards, 'Tuner' Circuit board, 4004 w/ balance of variable transformers, resistors, capacitors, diodes etc. - $35.

Circuit Boards, Circuit board, F5003 w/ balance of transistors, variable transformers, resistors, capacitors, diodes etc. - $35.

Circuit Boards, 'Tone Control' Circuit board, 9004 (less tone pots, but w/ balance of transistors, resistors, capacitors, diodes etc.) - $35.

Circuit Boards, Circuit board, 8003-1 w/ diode rectifiers SA-2Z and balance of variable transformers, resistors, capacitors, diodes etc. - $35.

Circuit Boards, Circuit board, 7006 w/ balance of resistors, capacitors, diodes etc. - $25.


Transistors, Power amplifier / Output Transistors
(4 each Hitachi 2SC1030, TO-3 output transistors) - $25. ea. (will be re-tested prior to shipping)

Heat Sink, Black anodized, aluminum heat sink plate
(less output transistors) - $25.


Transformer
,
Power supply Transformer, "youthelectricco ltd" 35900018 - $45.

Capacitors, Power supply filter Caps. 2200uf / 63V - $20. ea. (will be re-tested prior to shipping)

Capacitors,
Power supply filter Caps. 2200uf / 35V - $12. ea. (will be re-tested prior to shipping)


REALISTIC STA-65C / STA65C PARTS / SPARES

Jacks / Connectors / Terminals, Speaker Outputs / Binding posts on black board - $40. all eight

Jacks / Terminals / Connectors, RCA I/O jacks including TAPE OUT, TAPE MON, AUX, XTAL (Crystal phonograph pickup), MAG (Magnetic turntable cartridge) jacks / connectors all mounted on resin board - $55.

Jacks, Headphone Jack
- $20.

Jacks / Terminals / Connectors, Antenna Input posts / terminals in pairs, on board - $25. each bank of 2

Jacks
, AC Convenience Outlet
- $20.

Antenna, Internal AM antenna ferrite stick - $35.

Fuse, Internal, 'Bakelite' Fuse holder / clips - $20. ea.

Fuse, Main AC line fuse holder WITH cap - $25.

Panel / Plate, Rear panel (less any attached components) - $30.

Panel / Plate, Output transistor perforated cover panel / plate - $20.


Feet, set of 4 rubber feet -
SOLD

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, East, Inside Island, Simplicity, Drawer 2, Left side. - Revised 11/6/2023



 
 


(Click on above thumbnails to enlarge photos)
RADIO SHACK / REALISTIC STA-120 STA120 STEREO RECEIVER PARTS / SPARES

SOME PARTS INTERCHANGEABLE WITH THE STA-120B, BUT THE 120B HAD 'PLUG-IN' CIRCUIT BOARDS. THE STA-120 HAS SOLDERED IN BOARDS.

- PARTING OUT -

Bonnet, Wood case cover
bonnet. Walnut wood veneer. Decent cond. with no distractions. - $SOLD

Panel, Face panel (less knobs / buttons / wood end caps) - $45. Clean SOLD 3/9/2023

Panel, Dial Glass panel - $35. SOLD

REALISTIC STA-120 / STA120 PARTS / SPARES

Knobs / Caps / Buttons, Tuning knob - $30.

Knobs / Caps / Buttons, round Tone / Balance / Function / Bass / Mid / Treble  knobs - $20. ea.

Knobs / Caps / Buttons
, Volume
knobs / caps for linear faders, 'Left'
- $20. LEFT SOLD

Knobs / Caps / Buttons
, Volume
knobs / caps for linear faders, 'Right'
- $20.

REALISTIC STA-120 / STA120 PARTS / SPARES

Switches
, 'Function' switch AM/ FM, AUX, PHONO
- $35.

Switches
, DPDT 'Hi-Filter', 'Low-Filter' or 'Speaker' switch
- $20. ea. SOLD OUT

Switches, 'Power' push switch
 - $35. ea.

Potentiometer / Controls, 'Treble' or 'Bass' (tone) Pot Control Alps 20kΩAX2 - $25.

Potentiometer / Controls, Midrange (tone) Pot Control Nobel 20k Ohms -  $25.

Potentiometer / Controls,
Volume Pots, Alps, linear faders, 100kX2 -
$25. ea. L&R are the same
SOLD OUT

Capacitors, Variable Tuning Capacitor - $35. for assembly

Wheel, Tuning String / Dial wheel (plastic wheel) - $30.


Meters
, Tuning Meters
- $25.

Meters, Signal Strength - $25.


REALISTIC STA-120 / STA120 PARTS / SPARES

Flywheel, Dial Shaft / Flywheel / Tuning control assembly
(knob sold separately) - $25.

Circuit Boards
, Circuit boards - $45. ea.


Amplifier, Power amplifier Transistors
(4 each Bendix B-170005 / 6852K output transistors) - $25. ea. SOLD OUT


Transformer
,
Power supply Transformer 2210161 - $45.

Transformer, Internal Chokes / Transformers 2240011 - $20. ea.

Capacitors, Power supply filter Caps (variety) - $15. ea.


REALISTIC STA-120 / STA120 PARTS / SPARES

Jacks, Speaker Outputs on black board - $35. all

Jacks, Headphone Jack
- $20.

Jacks, Antenna Input Jacks on board 'Tape / AUX / Phono' - $35. all


Jacks
, AC Convenience Outlets
- $25.

REALISTIC STA-120 / STA120 PARTS / SPARES

Antenna, AM antenna ferrite stick - $35.

Fuse, Main Power Fuse holder & / or cap - $25.

Fuse, Speaker Output Protection Fuse holder & / or cap - $25.

Any rear panel Input / Output  component not already listed - $20. ea.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, S. / SW. Center, Brown Hon Cab, 4th/bottom Drawer  - Revised 3/09/2023




NEW LISTING 3/3/14

RADIO SHACK / REALISTIC STA-2300 STEREO RECEIVER PARTS / SPARES
(many parts will / MAY* also fit the Realistic STA-2100 Receiver)
Realistic STA-2300 stereo receiver was parted due to too many 'physically' broken / missing control shafts. Unit functioned fine and well.
- PARTING OUT -

Panel / Plate,  Aluminum Face / front panel (less glass, knobs / buttons) - SOLD

Bonnet / Case / Cover, Walnut veneer, Fair cond. No chips / serious dings, but scuffs. Since it's 'real' wood veneer, Lemon Oil will do wonders for it. The metal top is fine
(breaks down for shipping to a 'flat pack' 19"x16"x2" before packing) $75. SOLD 5/17/2023



Meters, LED ‘Tuning / Signal’ centering and signal strength indicator / display
(less aluminum display cover) on circuit boards #P-200927 and #P200928 w/ IC; Sharp IR2434 and transistors; 2SA733, 2SC945 and balance of resistors, capacitors, etc. - $50. pair

Meters, ‘Signal strength’ LEDs on circuit board P-20093 - $40.

Panel, ‘Dial’ scale, aluminum
(less meters, tuning flywheel, switch) - $30.

Panel, ‘Dial’ scale cover, clear plastic - $25.

Panel, Tuning scale ‘end panels’, plastic left or right
(less tuning scale) - $15. ea.

Panel
, ‘Display’ bezel, aluminum #P-700495 (less LED's / circuit boards) - $25.

Panel / diffusion panel, ‘Dial’ light / bulb / lamp plexi-glass, clear, plastic diffusion panel
(lamps / bulbs / sockets not included) - $30. SOLD

Panel / diffusion panel, Gray rubber ‘Dial’ light / bulb / lamp sockets / holders (Stanley 8V / 0.3A, blue-tinted (Pioneer AEL-029) lamps / bulbs not included) - $15. ea.

Panel / Display, ‘AM’, ‘FM’, ‘PHONO 1, 2’, ‘AUX’ & ‘STEREO’ Indicator LEDs on circuit board # P-200931 - $30.

 Pointer / Indicator, ‘Dial Pointer’ #D-1243 / P-450063 (less dial scale, scale cover) - $30.

Escutcheon, Tape ‘Dubbing’, ‘Monitor’ toggle switch escutcheons
(less toggle switches, caps sold separately) - $20. ea. (will need to be ‘re-glued’ onto your faceplate

REALISTIC STA-2300 STEREO RECEIVER PARTS / SPARES

Knobs / Caps / Buttons, ‘Tuning’ knob K-2301 / P-650199 (see also / Also fits Realistic STA-2000 & STA-2000D , STA-2100 & STA-2300) (less tuning flywheel) - $45

Knobs / Caps / Buttons, ‘Volume’/ ‘Balance’ 'stacked / nested / concentric knobs
Volume K-3015 / P-650288 Balance; K-3014 / P-650289 or (P-650519 after serial number 10051) (see also / Also fits Realistic STA-2100 & STA-2300) (less pots) - $45. for 'concentric' pair SOLD

Knobs / Caps / Buttons, Input Selector, ‘Bass’, ‘Midrange’, or ‘Treble’ knobs /
#K-2297 / P-650196. 22mm tall x 26mm in diameter of silver, knob body & 28mm diameter at skirt (see also / also fits Realistic STA-2100 & STA-2300) (these will also work for the STA-2000 & STA-2000D 'Selector' and 'Balance' positions, but NOT the "tone" positions) (less pots) - $35. ea. 1 REMAINING IN STOCK SOLD / MIA?

Knobs / Caps / Buttons, ‘Speakers’, ‘Mono’, ’Auto-M’, FM Mute’, ‘HI-MPX Filter’, ‘Loudness’,’ High Filter’, ’Low Filter’, ’Power Meter Low’, ’Speakers A / B’, ‘Bass Turnover’, ‘Treble Turnover’ round button push switch caps assembly w/ springs
#K-3016 / P-650299 15.7mm tall x 11.8mm in diameter of silver, knob body & 16.5mm diameter at black, plastic skirt (MAY also fit Realistic STA-2100) - $30. ea. 1 REMAINING IN STOCK

Knobs / Caps / Buttons, ‘Power’ push button cap
#K-3532 / P-650361 (MAY also fit Realistic STA-2100) (less switch) - $35. SOLD

Knobs / Caps / Buttons, ‘Monitor’ toggle 'lever' switch cap / knob
#K-2300 / P-650201 15mm tall x 9.5mm diameter at skirt (MAY also fit Realistic STA-2100) (less switch) - $25. 1 REMAINING IN STOCK  SOLD / MIA?

Knobs / Caps / Buttons, ‘ Dubbing’ toggle switch cap
#K-2300 / P-650201 (MAY also fit Realistic STA-2100) - SOLD

REALISTIC STA-2300 STEREO RECEIVER PARTS / SPARES

Switches / Selectors, ’Speakers A’, ‘Speaker B’ latching push switch, SDU3P / AC 125v, 5A (see also / Also fits Realistic STA-2100 & STA-2300) (less button / cap sold separately) - $35. ea.

Switches / Selectors, ‘Power Meter Low’, 24-pin latching push switch
(see also / Also fits Realistic STA-2100 & STA-2300) (less button / cap sold separately) - $35.

Switches / Selectors. ‘High Filter’, ‘Low Filter’, ‘Auto-M’, ‘FM Mute’, ‘Hi-MPX Filter’. ‘Mono’, ’Loudness’ latching push switches
#S-7377 / P-180313 (see also / Also fits Realistic STA-2100 & STA-2300) (less buttons / caps sold separately) - $25. ea.

Switches / Selectors. ‘High Filter’, ‘Low Filter’, ‘Auto-M’, ‘FM Mute’, ‘Hi-MPX Filter’. ‘Mono’, ’Loudness’ latching push switches
#S-7377 / P-180313 (see also / Also fits Realistic STA-2100 & STA-2300) (less buttons / caps sold separately) - $25. ea.

Switches / Selectors ‘Selector’ / Input wafer switch, outer end of aluminum shaft sheared off and will need re-engineering for knob attachment (switch still functional and salvageable. Shaft could be ‘spliced’ with another shaft and coupler, maybe from a Kenwood timer, or similar)
(less knob) on circuit board #P-200550 with transistors: 2SA970, 2SC2240 and balance of board mounted capacitors and resistors #S-1314 / P-180305  (MAY also fit Realistic STA-2100) - $55. ‘As-Is’

Switches / Selectors, ‘Tape Monitor’ toggle switch
#S-5038 / P-180209 (MAY also fit Realistic STA-2100) (cap sold separately - $35.

Switches / Selectors, ‘Dubbing’ toggle switch
#S-5039 / P-180210 (MAY also fit Realistic STA-2100) (cap sold separately - $35.

Switches / Selectors, ‘Bass Turnover’, latching push switch with extended mounting legs
#S-7377 / P-180313 (see also / Also fits Realistic STA-2100 & STA-2300) (less circuit board, cap / button sold separately - $30. SOLD

Switches / Selectors, ‘Treble Turnover’, latching push switch with extended mounting legs
#S-7378 / P-180314 (MAY also fit Realistic STA-2100) (less circuit board, cap / button sold separately - $30. SOLD

Switches / Selectors, ‘Power’ push switch
 #S-0856 / P-180239 (MAY also fit Realistic STA-2100) (less cap / button sold separately) - SOLD

REALISTIC STA-2300 STEREO RECEIVER PARTS / SPARES

Potentiometer / Control, ‘Volume / Balance’ control pot, Noble 220Y250K X 2 / 201Y250Kx2  #P-7172 / P-171421 (6 stacked pot) (knobs sold separately) - $55. SOLD

Control Potentiometer / Control, ‘Bass’, ‘Midrange’, ‘Treble’, control pots Noble 100k Ohms x2
 #P-7171 / P-171439 (MAY also fit Realistic STA-2100) - $35. ea. only 1 Remaining in stock

Transformer, Power supply Transformer P-100823 / 111C005 KS23xSMD- $95.

Rectifier, Bridge Rectifier S15VB on heat sink w/ ‘clamping’ capacitors - $35.

Capacitors, ‘Power supply’ filter caps, Elna CE-W 71v / 15000uf (will test thoroughly prior to ship) - $30. ea.

Transistors, Power amplifier Outputs TO3 / Metal Cased transistors (4x 2SB539C, 4x NEC 2SD287C)
(less heat sink, circuit board sold separately) - $25. ea. ALL SOLD OUT

REALISTIC STA-2300 STEREO RECEIVER PARTS / SPARES

Circuit Board, ‘Tone Control’ circuit board, #P-200924 with transistors: 2SA970, 2SC945, 2SC1222, and balance of capacitors and resistors (less pots, switches, caps, knobs, buttons sold separately) - $65).

Circuit Board, ‘Output’ level LED display circuit board # P-200929, with IC Sharp IR2406G (2) and balance of capacitors, and resistors
(less display / cover panel sold separately) -$55.

Circuit Board, ‘Power / Fuse / Rectifier’ circuit board #P-200718 (see Realistic STA-2100D & STA-2300) with transistors; 2SA750, 2SB605, 2SD325, 2SD571, 2SC1222 and balance of resistors, capacitors, 4 fuse holder / clips - $55. SOLD

Circuit Board, ‘FM tuning’ circuit board assembly #P-200926 with transistors: 2SC900, 2SC930, 2SC945, 2SC1923, IC Hitachi HA1197, JRC 4558DD / 0614, Sanyo A1231N, Sanyo LA3350,  balance of capacitors and resistors - $75.

Circuit Board, ‘switch’ circuit board, #P-200932 with transistors: 2SA733, 2SC945, and balance of capacitors and resistors
(less switches-sold separately) - $45.

Relay / Circuit Board
, ‘Relay’ circuit board #P-200561 with relay DEC type MS2U 24VDC 6A, transistor: 2SC945 and balance of board mounted resistors, capacitors and diodes
(see also / Also fits Realistic STA-2100 & STA-2300) - $45.

Relay, Omron Relay Type G2Z-222P-US, 3A / 120V, 4A / 40VAC / 24VDC COIL - $35. ea.

Circuit Board, ‘Protection’ circuit board #P-200923 with transistors: 2SA929, 2SC536, 2SD571, D325 and balance of mounted capacitors, resistors (Omron relay sold separately) - $55.

Circuit Board, ‘Power Output / Amplifier / Pre-Driver’ circuit board #P-200921 with transistors; 2SA992, 2SA929, 2SC1570, Hitachi 2SB649A, 2SD659A, 2SD668A, device 2SA979, Resistors; 7 Watt ‘Power Resistors’ Honda 7W / 0.47 Ohms and balance of resistors, capacitors and with 'sub board' "P-200320, with Transistor; Sanyo 2SD400 attached.
(less heat sink, output transistors sold separately) - $85. BOTH SOLD

REALISTIC STA-2300 STEREO RECEIVER PARTS / SPARES

Tuning Capacitor
, 7-gang tuning capacitor / assembly
#U-11034 on ‘Tuning’, circuit board #P-200925 with transistor 2SC1674  and board mounted capacitors and resistors,  (less plastic string wheel) - $45. SOLD

Flywheel, ‘Dial Shaft’ / ‘Flywheel’ / Tuning control assembly w/ bushing
#D-3272 / P-470026 - $40.

Wheel, Plastic String / Tuning wheel
#D-0411 / P-610623
(less tuning capacitor) - $25.

Jacks / Terminals / Connectors, Input RCA jacks ‘Phono 1’,’Phono 2’, ‘AUX’ sold as 3 pairs of jacks
#J-0970 / P-320151 (MAY also fit Realistic STA-2100) (less sheet metal panel) - $35.

Jacks / Terminals / Connectors, Input RCA jacks ‘Tape 1’ sold as 2 pairs of jacks
#J-0969 / P-320137 (MAY also fit Realistic STA-2100) (less sheet metal panel) - $25.

Jacks / Terminals / Connectors, Input RCA jacks ‘Tape 2’ sold as 2 pairs of jacks
#J-0969 / P-320137 (MAY also fit Realistic STA-2100) (less sheet metal panel) - $25.

Jacks / Terminals / Connectors, Antenna Posts / terminals
#HC-0535 / P-320370 (MAY also fit Realistic STA-2100) - $25. bank on phonelic board

Jacks / Terminals / Connectors, ‘Speakers’ single 3 clips good, 1 clip broken
#J-4604 / P-320257 (MAY also fit Realistic STA-2100) - $25. ‘As-Is’

Jacks / Terminals / Connectors, ‘Main in’ / ‘Pre Out’
#J-0969 / P-320137 (less Jumpers) - $30.

Jacks, ¼” ‘Headphone’ Jack #J-0919 / P-190125 - $25.

Jacks / Terminals / Connectors, AC ‘convenience’ outlets - $15. ea.

Jacks / Terminals / Connectors, Ground Post / bolt / screw - $15.

REALISTIC STA-2300 STEREO RECEIVER PARTS / SPARES

Fuse Cap Fuse ‘Cap’
(holder sold separately) - $30.

Fuse Holder,’ fuse holder’
#F-1017 / P-260011 (cap sold separately) - $25.

Antenna
, AM / Ferrite ‘stick antenna’ with bracket
(listed as "AM Bar Antenna Coil" in service manual) #P-110140
(will NOT fit Realistic STA-2100) - $35.

Feet / Legs / Pads / Cushions
, Set of 4 Feet
#F-0240 / P-610485
 - SOLD

Panel, ‘Rear’ sheet metal w/ DIN  (less connectors except DIN’s, inputs, outputs, antenna) - $40.

Panel, ‘Bottom’ w/o feet - SOLD


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, S. / SW. Center, Brown Hon Cab, 2nd Drawer  - Revised 10/28/2021
 

 
 
 

 


 


*
When we say "some parts "MAY" also fit", that does NOT mean ALL the parts listed 'WILL' fit, and unless we show specific info that a particular part DOES 'cross-pollinate', do not infer that it does or will fit. Only careful research and comparisons, on YOUR part with service manuals, service bulletins, other comparable units, etc., MAY indicate a POSSIBLE substitution. If your situation is 'critical', do not base your decision on information found on this or any other page of this web site and do your own research.

 

Unless specifically noted, we do not typically sell 'component level' parts such as resistors, diodes, transistors, semiconductors, ic's / integrated circuit chips, ceramic capacitors, led's, bulbs, lamps, belts, etc. We do commonly sell circuit boards / cards which will likely come with those parts attached.
 

 


 

LINKS TO OUR 'HI-FI' DEPARTMENTS

Amps and
Pre-Amps

Receivers

Cassette
Decks

Tuners

Turntables

8-Track Decks

CD Players

Reel-Reel
Decks

EQs and Signal
Processors

Speakers

Betamax and
VHS VCRs

Turntable Cartridges

Tube Audio

Ne'cessories

Speaker Parts

Record Players

Vintage Radios

Vintage
Walkmans

Headphones

Stereo Parts


Wondering where the "tone" you remember went?....


 

.... Surround yourself with Silver and find it again!


CONTACT INFO BELOW

$20. MINIMUM ORDER

 

                                             

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.


    Before calling, PLEASE read the text in below.      
 BEFORE
CALLING

(800) 806-4231 EXT #1
~10:00 AM- ~5:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE


OR

BEFORE EMAILING
 
parts@oaktreevintage.com

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

We DO NOT have your part unless the following conditions are met:

A) You HAVE SEARCHED our page(s) and HAVE FOUND the part you are looking for SPECIFICALLY listed on one of our pages or you have solid information that it's a 'bona fide' substitution for your part (unless noted already, we won't have any further info along those lines)
AND
B) The part that you have found is NOT marked as SOLD or SOLD OUT.


If you do NOT see it listed after thoroughly searching the pertinent page
(likely the page you landed on originally),  
we do not have it,   
nor do we know when
it might come in,   
nor do we maintain "waiting lists" for parts,    
nor do we know who
might have it.

Sorry, but phone and email traffic for parts
we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.


 We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!


ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT
lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms may automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings".
We do not return calls / emails for requests for parts we don't show / or have available (we may choose contact with further, useful information).


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |  KEYBOARD PARTS 

___________________________________________

Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.


Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |   SELLING-TRADING-CONSIGNING   |  KEYBOARD PARTS   I   FAQ'S  
  CONDITION RATINGS   |   ORDERING / POLICIES    |    WARRANTIES / RETURNS   |   SHIPPING     
 RESTORATION PROCEDURES   |   REPAIRS  | CONTACT PARTS


As much of the price charged for parts is for the 'time to extract' from it's donor unit, unless we send the 'wrong part', parts are NOT returnable.
See our "
Warranties / Returns" page via the link below for more details.


POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately
. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent
research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
 

Copyright © 1997-2023 Oak Tree Enterprises, LLC

COPYRIGHT INFORMATION