Categories

Home
Hi-Fi / Stereo Gear
Speakers
Receivers
Tuners
Amps / Pre-Amps
EQs / Signal Procs
Cassette Decks
Reel - Reel Decks
Turntables
Cartridges
8 Track Players
Headphones
Speaker Parts
Stereo Parts
HI-Fi Accessories

Customer Care

Contact Us
Repair Resources
Restoration Steps
 

Purveyors of Electronic, Musical and Vintage goods from then, now and in between. 
Since 1982.

TECHNICS STEREO PARTS /
SPARES - USED / VINTAGE / SALVAGE

 
Technics Stereo / Tape deck Parts / spares. Technics models RS-M68 RS-M255X RS Cassette Deck / Decks Parts for RS-B48R / RSB48R, RS-M205, RS-M228X, RS-TR157, SA-222, SA-5070, SA-5170, Receiver and others. SL Turntable salvage units & electronic parts for electronics technicians, repairs, and restoration.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20% off sale
on salvage audio & keyboard parts.
 
*See sales banners on parts pages for details
 


LINKS TO OUR 'HI-FI' DEPARTMENTS

Amps and
Pre-Amps

Receivers

Cassette
Decks

Tuners

Turntables

8-Track Decks

CD Players

Reel-Reel
Decks

EQs and Signal
Processors

Speakers

Betamax and
VHS VCRs

Turntable Cartridges

Tube Audio

Ne'cessories

Speaker Parts

Record Players

Vintage Radios

Vintage
Walkmans

Headphones

Stereo Parts

THIS IS NOT THE SAME PAGE YOU JUST VIEWED. KEEP SCROLLING DOWN.

 



MORE GEAR BEING ADDED AS IT BECOMES AVAILABLE
KEEP CHECKING!!!

>>> IF YOU DON'T SEE YOURS 
WE DON'T HAVE IT YET <<<
 

*Note about parts / spares sales

* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.

Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.

Parts, general condition / circuit board condition; Most of our parts are from 'salvage / donor' units. While we don't sell parts that are 'known' to be bad, occasionally parts will need further adjustment, cleaning, 'tweaking', or in the case of circuit boards, may need old, conductive glue / epoxy further cleaned, and some 'common' parts / components such as, aging / leaky capacitors, parts whose values have drifted, and some epoxy transistors may need to be replaced due to 'green / black / furry' legs, or because those parts were marked as 'sold separately'. Some circuit boards may have 'tired' "landing / solder pads", or severed traces, or cold / bad solder joints which can require solder re-flow or 'jumpers'. Unless noted, circuit boards will be 'crack / split / break' free.

Parts pricing; Most of our parts price / value will be based on a few things. Firstly, we are in the restoration / refurb business, so we consider what we would be willing to pay for the part if we needed it (which again, is what the parts are listed for in the first place, "our units"). Secondly, the rarity / value of the unit the part(s) fit. The 'Tuning Knob' for a receiver that has a final value of $350 will likely be much less than the "Tuning Knob" for a unit with a final value of $1500 or more (a set of tires for a typical sedan will be $400 to $600. A set for a Lamborghini can be $16,000). Thirdly, the 'rarity' of the part. Forth, the 'condition' of the part. Fifth, the difficulty to extract the part, or success rate for extracting certain parts. Sixth; frankly it's a LOT of work and time to part out a unit. Most take 1 to 3 days of shop time to process. Not only the disassembly, but the 4-15 hours of pre-testing / servicing and just as time consuming can be the amount of time it takes to do all of the research we do and the info we list on many parts for cross-referrencing to other units that my use the same parts by scouring service manuals. On many circuit boards we will list every 'semi-conductor' which is also very time consuming. Lastly, every call or email for a part can require 20 minutes to sometimes over an hour of 'phone support', often (about 70% of the time) with me convincing the potential purchaser that they don't need the part I have to solve their problem.
Sorry to sound like a "whiner" about selling parts, but "time is money".

Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' and most are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are commonly 'disproportionate' to their cost, typically nearly equal to and sometimes greater than the cost of the part.  Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight so are commonly just as expensive as shipping a 'complete unit'. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive).  It is what it is....

A non-response to an email of phone call / voice message request for a part that we don't show on one or our pages, or is already marked "SOLD" will be typical. We simply don't have the time / man-power resources to respond to every query we get for items we don't show as avail. Most folks get that. Having said that, I / we may respond if we have information on a substitution or other useful information relating to it.

A non-response to an email of phone call / voice message request for a part (we may appear to have, but typically 'highlighted in Orange or Yellow'), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale.  Also, parts requests can occasionally take time for us to respond to. While we may have a part listed, and we like to keep the website 100% accurate, occasionally a part will be 'used by us' or 'previously sold' and we by oversight, and we did not get the web listing marked "SOLD", or the part gets  'mis-placed' or 'lost' (laid down somewhere in the warehouse(s) and then it get's lost track of (that happens to our coffee cups all the time, then we find it months later with 'a good batch of 'penicillin' growing in it), so we like to 'lay eyes on it' prior to responding. Sometimes we just can't figure out which cabinet or drawer parts were assigned to (and we're working on a system for that one).

Some folks email / call and want us to respond either way / whether we have the part or not. Again, we simply do not have the time resources to do that. Our time must be utilized on the requests we can fulfill. 
Sorry for all the excuses, but that's how the 'system' (or lack thereof) works.
And, if you don't see it, we likely don't have it.
 Thank you for your understanding.

$20. MINIMUM ORDER

MOST OF THE PARTS LISTED BELOW ARE FROM SALVAGE UNITS.

 


 

 

-
-
-





(Click on above thumbnails to enlarge photos)
TECHNICS SA-104 / SA104 STEREO RECEIVER PARTS / SPARES
for sale

 

Some parts
MAY also fit other Technics SA Stereo Receiver but we have no definitive info.

 

Bonnet / Top Plate / Panel / Cover / Lid, – SOLD  
(Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Panel, Face panel with glass and plastic end caps. Good condition - $35.

Pointer, Dial pointer - $18.

Knobs / Caps / Buttons / Covers / Covers, Volume knob - $25. 
 
Knobs / Caps / Buttons / Covers / Covers, Tuning knob - $25. 

Knobs / Caps / Buttons / Covers / Covers, Round Bass, Treble, Tone / Balance - $20. ea.
 
Knobs / Caps / Buttons / Covers / Covers, Rectangle 'push' caps for Speakers / ‘FM Muting’, ‘Loudness’, ‘Tape Monitor’, 'AUX', 'TUNER', 'PHONO' Push switch caps - $12.50 ea.

Knobs / Caps / Buttons / Covers / Covers, Rectangle 'push' caps for ‘Power’ Push switch caps - $20. ea.
 

TECHNICS SA-104 / SA104 STEREO RECEIVER PARTS / SPARES

Switches / Selectors, 'Power' Push switch S-3 TV-3, 3A250VAC, ESB90604T. w/ ‘clamping capacitor’ 103P - $30.


Switches / Selectors, Push switches for Speakers Main & Remote or FM Mute & Loudness - $20. ea pair

Switches / Selectors, 'INPUT SELECTOR' Push switch / Triple, Self-Canceling Push button switches for AUX/Tuner/Phono AND 'Tape Monitor' AND 'Band selector' - $35. for set of 5 switches
 

Potentiometer / Control pot, Volume Pot
- $30. SOLD  
 
Potentiometer / Controls, Bass pot - $20. ea
.

Potentiometer / Controls, Treble pot - $20. ea.

Potentiometer / Controls, 'Balance' pot 
- $30.

Flywheel, Dial Shaft / Flywheel / Tuning control assembly (knob sold separately) - $30.

transistors / Outputs / Power Amp, Output STK Power Pack, Original *STK4833. Good condition - $30. ea.

Circuit Boards, Main Tuner / Power Supply / Amp / pre-amp / 'everything' Circuit board SUP24110A, with variable / tuning capacitor; ECV-5MD34X71G and with IC chips; JRC 4562DD, Mitsubishi AN278, Mitsubishi AN7273, NEC UPC11613C, original / OEM transistors 2SA1015, 2SC1675, 2SC1685, Bridge Rectifier S4VB, Voltage Regulator / transistors 2SD880 (X2), 0.22 Ohm, 470 Ohm, 680 Ohm, 56 Ohm precision resistors and more UPC1161C
(less switches, pots, controls, filter caps, heatsink, output chip, jacks, RCA / Antenna jacks) - $45.

Circuit Boards, LED Signal Strength / FM Stereo LED indicator Circuit board SUP24110B / GCMK-97X w/ 3x Red LED's and 1x Green LED - $25.

Transformer, Power supply Transformer SLT5M185 (ETP66PU18B) (MAL66A15) North American version ONLY
- $35.
 
Capacitors, Power supply filter Caps 35V / 6800 uf - $18. ea.
 

TECHNICS SA-104 / SA104 STEREO RECEIVER PARTS / SPARES

 
Jacks / Terminals, Speaker Outputs / clips / terminals (yes, those 'stupid' Technics, rotating, '
POS' speaker terminals) All working - $35. SOLD for A&B speakers
 
Jacks, Headphone Jack with circuit board SUP
24110C - $25. ea.
 
Jacks, RCA I/O Jacks / Terminals, with, DIN antenna terminals and ground connectors - $35. complete assembly SOLD

AM Ferrite-Bar Antenna  - $25.

Jacks, AC Convenience Outlets - $20. ea.

Panel / Plate, Rear sheet metal panel, less components. – $25.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, S. / SW. Center, Brown Hon Cab, Top Drawer  - Revised 3/18/19

 

 

 

Technics_SA-222_Stereo_Receiver_web.jpg (61001 bytes)    Technics_SA-222_Stereo_Receiver_collage.jpg (213837 bytes)

(Click on above thumbnails to enlarge photos)
TECHNICS SA-222 / SA222 STEREO RECEIVER PARTS / SPARES
for sale

 

Some parts
MAY also fit other Technics SA Stereo Receiver but we have no definitive info.

 

Top Plate / Panel / Cover / Lid, Gray Sheet Metal – SOLD  
(Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

 Panel, Face panel with glass. Good condition, with only minor ‘scratches’ on plastic display  window (less ‘Power’, ‘AUX’, ‘Tuner’ & ‘Phono buttons). Minor corrosion on integrated ‘push’ caps - $35.
 

TECHNICS SA-222 / SA222 STEREO RECEIVER PARTS / SPARES

Knobs / Caps / Buttons / Covers / Covers, Volume knob - $25. 
SOLD
 
Knobs / Caps / Buttons / Covers / Covers, Round Bass, Treble, Tone / Balance, Selector knobs - $20. ea.
 
Knobs / Caps / Buttons / Covers / Covers, Rectangle 'push' caps for Speakers / ‘Auto Scan’, ‘FM Muting’, ‘Loudness’, ‘Tape Monitor’, Push switch caps - $12.50 ea.

Knobs / Caps / Buttons / Covers / Covers, Rectangle 'push' caps for ‘Power’, ‘AUX’, ‘Tuner’ & ‘Phono Push switch caps - $18.50 ea.


 Switches / Selectors, 'Power' Push switch S-3 TV-3, 3A250VAC, ESB90144T112. w/ ‘clamping capacitor’ 103P - $30.

Switches / Selectors, Push switches for Auto Scan / FM Mute / Sub Filter/ Loudness/ Tape 1/ Tape 2 - $20. ea.

Switches / Selectors, 'INPUT SELECTOR' Push switch / Triple, Self-Canceling Push button switches on circuit board
Circuit board SUP20610B for AUX / Tuner / Phono selector - $30. for set of 3 switches SOLD
 
Switches / Selectors, ‘FM/AM Allocation’ switch / SUP20650C - $20. ea.

Switches / Selectors, ‘Speaker Main’ ‘Speaker Remote’ Push switches - $20. ea.

Potentiometer / Control pot, Volume Pot M250KΩB - $30.
 
Potentiometer / Controls, Bass pot 14 T  - $20. ea.


Potentiometer / Controls, Treble pot M 100k, 1 3 L  - $20. ea.


Potentiometer / Controls, 'Balance' pot  M200KG
- $30.
 
Meters, AM/ FM Tuning / Signal Meter SSM173-1 - $45.
 
TECHNICS SA-222 / SA222 STEREO RECEIVER PARTS / SPARES

Circuit Boards, Display / Readout Circuit board SUP20650A and SUP20650B Circuit boards, with Fluorescent display / readout, and momentary switches for FM / AM, ‘Down / UP’, Memory / Presets. Contains IC chips: NEC  D4011C / UOY517, LED Signal Strength Display - $45.
 
Circuit Boards, 'Power Supply' / 'Power Amplifier / Driver Boards' Circuit board  SUP20590A w/ Rectifier Diodes & balance of components including ‘Pre-Drivers, and power amp output chip; STK2028*, and 2SD880 Voltage Regulator.
(less switches, jacks, speaker terminals, and large filter capacitors) - $55.

OR


Transistors / Outputs / Power Amp, Output STK Power Pack, Original *STK2028. Good condition - $30. ea.

Circuit Boards, Tuner Circuit board SUP20610A, with IC chips; Sanyo A1231N, NEC UPC1018C & UPC1161C
(less switches, RCA / Antenna jacks) - $45.

Circuit Boards, Pre-Amp / Selector Circuit board SUP20610B (less pots & switches) - $35. SOLD

Circuit Boards, Tone Control Circuit board SUP20610C
(less pots) - $25.

Transformer, Power supply Transformer SLT5M135 North American version ONLY
(also may fit Technics SA-800) - $75. SOLD
 
Capacitors, Power supply filter Caps 45V / 6800 uf - $20. ea.
 
TECHNICS SA-222 / SA222 STEREO RECEIVER PARTS / SPARES
 
Jacks / Terminals, Speaker Outputs / clips / terminals - $45.

 
Jacks, Headphone Jack with circuit board SUP20590B - $25. ea.

 
Jacks, RCA I/O Jacks / Terminals, with, DIN antenna terminals and ground connectors - $45. complete assembly

AM Ferrite-Bar Antenna  - $25.

Jacks, AC Convenience Outlets - $20. ea.

Panel / Plate, Rear sheet metal panel, less components.– $25.


Battery Compartment, From rear plate for 3 “AA” Batteries. -SOLD

Panel / Plate, Bottom Panel. Masonite. Less feet. SOLD
 
Feet, Set of 4 feet - $20. SOLD.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

 - Revised 3/18/19

 

 

 

    

(Click on above thumbnails to enlarge photos)

TECHNICS SA-600 / SA600 STEREO RECEIVER PARTS / SPARES
for sale
 

 Some parts
MAY* also fit other Technics SA Stereo Receiver models such as the SA-200, SA-300, SA-400, SA-500, SA-600,  SA-700, & possibly the SA-800 & SA-1000. If we haven't included "See Also" or "Also Fits" information that we have gotten by comparing service manual parts lists, then you'll need to do your own research. We can say that many of the parts, such as switches & potentiometers do not fit units above the "SA-600" unless stated.

 

Top Plate / Panel / Cover / Lid, Wood Top cover Plate
, Wood grain, vinyl. Good condition, minor dings, with metal ventilation screen. Measures 17.75" wide on 'finished top' x 11 3/8" deep. - $40. (Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Panel, Face panel with glass. Good condition, with only minor ‘scuff’ near upper, right corner of window on aluminum. Glass perfect. (less knobs / buttons) - $45. SOLD

Dial Light ‘Diffuser’, Plexi-glass lamp diffuser - $30.

Sockets, Dial Light / Lamp Socket - $12.50 ea.

Panel / Plate / End Caps, Wood grain, vinyl wrapped side panels. Good condition, with only minor dings. 5 13/16" tall x 11.75" deep
(also fits Technics SA-500 and SA-600) - $20. ea. (left {looking at front of unit} / 'Starboard' side SOLD)
 
TECHNICS SA-600 / SA600 STEREO RECEIVER PARTS / SPARES

Knobs / Caps / Buttons / Covers / Covers, Tuning knob (35mm diameter x 23mm in height)
#SBN757
(see also Technics SA-300, SA-400, SA-500 & SA-600 {NOT the SA-700, SA-800 or SA-1000}) - $35

Knobs / Caps / Buttons / Covers / Covers, Volume knob
#SBN753
(see also Technics SA-300, SA-400, SA-500 & SA-600 {NOT the SA-700, SA-800 or SA-1000}) - $35SOLD
 
Knobs / Caps / Buttons / Covers / Covers, Round Bass, Treble, Tone / Balance, Selector knobs
#SBN755
(see also Technics SA-300, SA-400, SA-500 & SA-600 {NOT the SA-700, SA-800 or SA-1000}) - $25. ea.
 
Knobs / Caps / Buttons / Covers / Covers, Round 'push' caps for 'Power Display’ / Speakers / ‘Range’, Push switch caps w/ spring
#SBC193
(see also Technics SA-300, SA-400, SA-500 & SA-600)- $18.50 ea.

Knobs / Caps / Buttons / Covers / Covers, Toggle switch caps
#SBD7-2 for 'Power’, ‘Boost’, ‘Loudness’, ‘FM Muting / Mode’, ‘Rec Mode’  & ‘Tape Monitor’. (see also Technics SA-200, SA-300, SA-400, SA-500, SA-600. Possibly also; Technics SA-700, SA-800 and SA-1000, but they designate "SBD7" without the "2") - $20. ea. 4 Remaining in stock
 
Switches / Selectors, 'Power' toggle / ‘snap’ switch
#SSLG1 / SSL81
w/ ‘clamping capacitor’ 103M
(Appears to ONLY fit Technics receiver model SA-600) - $35. SOLD

Switches / Selectors, Push switches for 'Power Display’ / Speakers / ‘Range’
#SSH219S
(see also Technics SA-500 & SA-600) - $35. pair

Switches / Selectors, 'INPUT SELECTOR' Rotary switch / selector
#ESRM164F25E  
(see also Technics SA-300, SA-400, SA-500 & SA-600) - $45. SOLD
 
Switches / Selectors, ‘Boost-Low-High’ toggle switches /
#SLL1 / SSL119
(see also Technics SA-500 & SA-600) - $25. ea. SOLD / MIA?

Switches / Selectors, ‘FM Mute / Loudness’ toggle switches /
#SSL123 
(see also Technics SA-300, SA-400, SA-500 & SA-600) - $25. ea. SOLD

Switches / Selectors, ‘Record Mode’ toggle switch /
#SSL115  
(see also Technics SA-400, SA-500 & SA-600) - $30. ea. 1 in stock

Switches / Selectors, ‘Tape monitor’ toggle switch /
#SSL117 
(see also Technics SA-400, SA-500 & SA-600) - $30. ea. SOLD

TECHNICS SA-600 / SA600 STEREO RECEIVER PARTS / SPARES
 

Potentiometer / Control pot, Volume Pot Alps 2-Gang unit.
#ewf2f25bf5s 974B
2x 250kΩ (see also Technics SA-500 & SA-600) - $40. SOLD
 
Potentiometer / Controls, Bass or Treble pot
#ewD32f25C15s 974R / 2x 100k Ohms  (see also Technics SA-500 & SA-600) - $35. ea.
 
Potentiometer / Controls, 'Balance' pot  891G
#EVH63F25G25S (see also Technics SA-500 & SA-600) - $35.
 
Meters, AM/ FM Tuning / Signal Meter pair
#SSM133 (see also Technics SA-400, SA-500 {SSM133N} & SA-600, SA-700 and possibly others) - $45.

Meters, LED Power Meter pair on circuit board
#SUP14170D - $35. SOLD

LED indicators, ‘Program’ indicators, ie; AM, FM, PHONO, AUX, FM STEREO - $35. entire bank
 
LED indicators, ‘Safety’ indicator - $18.50

Flywheel, Dial Shaft / Flywheel / Tuning shaft control assembly
#SDT8043-2 (see also Technics SA-300, SA-400, SA-500 & SA-600) (knob sold separately) - $45.
 
Pulley / String-wheel, plastic string wheel for tuning capacitor 
#SDD47-1 (see also Technics SA-300, SA-400, SA-500 & SA-600) - $35.
 
Pointer, Dial Pointer
#SDP1129 (see also Technics SA-500 & SA-600) - $25.

Circuit Boards, ' Tuner / Main' Circuit board #SUP14210A Circuit board WITH tuning capacitor, and AM ‘Stick’ antenna attached. Contains IC chips: Mitsubishi  AN217P, AN363N, AN377 and 2SC1398 W/ 5-Gang Tuning Capacitor
(less pots & switches, jacks, string wheel) - $45.
 
Circuit Boards, 'Power Supply' / 'Power Amplifier / Driver Boards' Circuit board w/ bridge Rectifier & balance of components including ‘Pre-Driver’ original / OEM transistors, Mitsubishi 2SA913 & 2SC1913
(less pots & switches, jacks, Relay, and large filter capacitors) - $55.

Circuit Boards, Circuit board
#SUP14170C (less switches) - $35.

Circuit Boards, Circuit board
#SUP14170F - $30.

Circuit Boards, Circuit board
#SUP14190 - $30. ea.

Coupler / Connector, Circuit Board bridge coupler SJS5611 - $18.50

 
TECHNICS SA-600 / SA600 STEREO RECEIVER PARTS / SPARES

Transistors / Outputs / Power Amp, Output original / OEM transistors, Metal Cased TO-3 style, 2SD665 & 2SB645 Originals, Good condition - $20. ea. SOLD OUT

Heat Sink, (less original / OEM transistors) - $25.


Relay, #AP39312, 7A / 125-250 VAC, 3A / 30VDC / DC24V - $25.

Transformer, Power supply Transformer
#SLT5Q75 North American version - $75. SOLD
 

Capacitors, Power supply filter Caps 55V / 15,000 uf - $30. ea.
 
Jacks / Terminals, Speaker Outputs clips / terminals / speaker posts #SJF8013
(see also Technics {SA-300, SA-400 & SA-500 SJF8013-1} & SA-600) - $35. ea. bank of 4
 
Jacks, Headphone Jack #XCJ621B-A
(see also Technics SA-300, SA-400, SA-500,SA-600, SA-700 & SA-800. May also fit SA-1000?) - $30.
 
Jacks, RCA Input / Output Jacks & Antenna Input Jacks - $45. complete assembly

Jacks, AC Convenience Outlets
#SJS9205-1
(see also Technics SA-300, SA-400, SA-500,SA-600, & SA-700) - $20. ea.

Fuse Block / cover
, Speaker protection fuse block complete with fuse cover #SUV337
(see also Technics SA-600, SA-700 and possibly others)- $25.

Panel / Plate, Rear sheet metal panel, less components.– $35.

Panel / Plate, Bottom Panel. Masonite. Less feet. – $35.
 
Feet, Set of 4 feet
#SKX245-1
(see also Technics SA-300, SA-400, SA-500, & SA-600) - $30.

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.


Location: PB, East, Inside Island, 1st Gray Cab, Top Drawer. - Revised 8/28/2024

 

(Click on above thumbnails to enlarge photos)

TECHNICS SA-5070 / SA5070 STEREO RECEIVER PARTS / SPARES
for sale

Receiver was parted out due to weak FM tuner. Pre-amp and power amp sections functioned fine.
Some parts
MAY also fit other Technics SA Stereo Receiver but we have no definitive info.

 

Bonnet / Top Plate / Panel / Cover / Lid, Wood grain vinyl / Formica covered,  minor corner chips - $35. 
(Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)

Panel, Face panel with glass and plastic end caps. Good condition - $35.

Pointer, Dial pointer - $18.

Knobs / Caps / Buttons / Covers / Covers, Volume knob - $25. 
 
Knobs / Caps / Buttons / Covers / Covers, Tuning knob - $25. 

Knobs / Caps / Buttons / Covers / Covers, Round Bass, Treble, Tone / Balance, Selector - $20. ea.
 
Knobs / Caps / Buttons / Covers / Covers, Round 'push' caps ‘Loudness’, ‘Tape Monitor’, Push switch caps - $12.50 ea.

Knobs / Caps / Buttons / Covers / Covers, Round 'push' caps for ‘Power’ Push switch caps - $20. ea.

TECHNICS SA-5070/ SA5070 STEREO RECEIVER PARTS / SPARES

Switches / Selectors, 'Power' Push switch, Matsushita S-3 TV-3, 3A250VAC, ESB-7086T-671 - $30.

Switches / Selectors, Selector Switch ‘Loudness’ or ‘Tape Monitor’ push switches - $20. ea.

Switches / Selectors, Input Source Selector Switch “Rack and Pinion Slide Switch”/ ‘FM’, ‘AM’, ‘Auto Muting’, ‘Phono’, ‘Aux’ “SSR57-1 - $45. SOLD 4/25/2024

Potentiometer / Control pot, Volume Pot 673M1 250K Ohms X2 - $30.
 
Potentiometer / Controls, Bass pot / Treble pot 673M1 100K Ohms X2 - $20. ea.

Potentiometer / Controls, 'Balance' pot - $30.

Flywheel, Dial Shaft / Flywheel / Tuning control assembly
(knob sold separately) - $30.

String wheel, Tuning string wheel - $20.

Capacitor, Tuning capacitor ECVC751KI44A - $30.

Meter, FM ‘Signal Strength’ meter with spring attachment - $20. ea.

Lamp Holder, Dial lamp / bulb clip / holder - $15. ea
(lamps / bulbs on included)

Fuse Holders, Fuse clip / holder on circuit board SUP 10890C - $20.

Transistors / Outputs / Power Amp, Output STK Power Pack / Chip, Original STK-043 “Stereo Amplifier”. Works fine - $30.

Heatsink, Output heatsink - $25.

Circuit Boards, Main Tuner / Power Supply / Amp / pre-amp / equalizer / Tuner ‘Front end’ /  'everything' Circuit board SUP 10890A, IC chips; AN217, AN363, AN373, 2SA721, 2SC828, 2SC1047, 2SC1383, K83/R176, TA7129P, Rectifier Toshiba ID261, ID2Z1,
(less switches, pots, controls, filter caps, heatsink, output chip, jacks, RCA / Antenna jacks) - $45.

Transformer, Power supply Transformer SL5N187 (ETP76BU(7B)) North American version ONLY - $35.
 
Capacitors, Power supply filter Caps 35V / 3300 uf - $18. ea.
 
TECHNICS SA-5070/ SA5070 STEREO RECEIVER PARTS / SPARES
 
Jacks / Terminals, Speaker Outputs / clips / terminals / Binding posts combined with speaker protection fuse holder / clip - $35. complete section

 
Jacks, Headphone Jack - $25. ea.

 
Jacks, RCA I/O Jacks / Terminals, with antenna terminals and ground connectors - $35. complete assembly

Jacks, AC Convenience Outlets - $20. ea.

Reflector, Aluminum dial light reflector - $20.

Panel / Plate, Rear sheet metal panel, less components. – $25.

Panel / Plate, Bottom plate / cover w/ feet - $20.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, South, Right of Center cab, Black, 4th drawer   - Revised 3/18/19

 

 



 



photo of SA-5360, a model a couple steps up for reference.

TECHNICS SA-5170 STEREO RECEIVER PARTS / SPARES
for sale


Some parts
MAY* also fit other Technics SA models such as the SA-5270 or SA-5360, but we have no definitive info.


Panel, Face panel with glass. Good condition, with only minor wear. Glass perfect. (less knobs / buttons) - $45.


Knobs / Caps / Buttons / Covers / Covers, Tuning knob - $25SOLD 5/16/2023

Knobs / Caps / Buttons / Covers / Covers, Round Bass, Treble, Tone / Balance, Volume knobs - $20. ea.


Knobs / Caps / Buttons / Covers / Covers, Round 'push' caps for 'Power / Speakers / Loudness / FM Muting / Mode / Tape Monitor  'Push' switch caps w/ spring - $12.50 ea.

Switches / Selectors, 'Power' Push switch. Matsushita S-3-TV35 type 3A250VAC ESB-7086T 572 - $30.

Switches / Selectors, 'Speaker Selector' Push switches / selector - $30. pair


Switches / Selectors, Push switches for 'Loudness', 'Tape Monitor', 'FM Muting'- $35. for all 3 on bank

Switches / Selectors, 'INPUT SELECTOR' Rotary switch / selector DMS SSR67 MODEL SRL - $40.
SOLD

TECHNICS SA-5170 SA5170 PARTS / SPARES

Potentiometer / Control pot, Volume Pot Alps 4-Gang unit. 871M1 2x 250kΩ - $35. SOLD

Potentiometer / Controls, Bass or Treble pot 772M1 or 871M1  2x 100k Ohms - $35. ea

Potentiometer / Controls, 'Balance' pot  7731 - $25. SOLD

Meters, AM/ FM Tuning VU Meter trio
- $30.

Flywheel, Dial Shaft / Flywheel / Tuning control assembly
(knob sold separately) - $30.

Pulley / String-wheel, plastic string wheel for tuning capacitor
 - $25.

Capacitor / Tuning Capacitor, Tuning Capacitor ECVC751K144A
 - $25.
SOLD

Pointer, Lighted Dial Pointer
 - $15.


TECHNICS SA-5170 SA5170 PARTS / SPARES

Circuit Boards, ' Tuner / Main' Circuit board SUP10850A Circuit board. Contains IC chips: Mitsubishi  AN217P, AN363, AN377 and original / OEM transistors 2SA721,  2SC828, 2SC1047,
2SC1398, 2SC1675, (less pots & switches, jacks, string wheel & Tuning Capacitor) - $45.

Circuit Boards, 'Power Supply' / 'Power Amplifier / Driver Boards' Circuit board w/ bridge Rectifier S4VB, with 'small' transistors; 2SA798, 2SC945, 2SA954, Mitsubishi 2SC828, 2SC1940, 2SC2003, power resistors; 2W 0.022 Ohm, and balance of diodes, resistors, capacitors, chokes / coils 
(less output transistors, pots & switches, and jacks) - $45.

Transformer, Power supply Transformer SLT5N167-W-A
- $45.

Capacitors, Power supply filter Caps 35V / 6,800 uf - $20 ea.

TECHNICS SA-5170 SA5170 PARTS / SPARES

Jacks, Speaker Outputs / Fuse Holders - $35. complete

Jacks, Headphone Jacks - $25. ea.


Jacks, RCA Input / Output Jacks & Antenna Input Jacks - $30. complete


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, West, Middle-Tan cab, 3rd drawer (W/Teac 6010)  - Revised 3/18/19
 
  

(Click on above thumbnails to enlarge photos)

TECHNICS STEREO RECEIVER
TECHNICS SA-8500X
Circa 1970'S

Very clean 4-Channel unit, the works, unfortunately no dial or indicator lamps will light. Unit looks near new inside and out. Selling for repair or parts
As-Is

SOLD
 

 


 



NEW LISTING 9/4/07
(Click on above thumbnails to enlarge photos)
TECHNICS SA-GX670
TECHNICS STEREO RECEIVER

Looks great. Unfortunately the receiver tested with squared sine waves. Unit looks nearly new inside and out. Selling for repair or parts
As-Is

SOLD

 

-

 
 

 

 
 


 



Technics_RS-M68_web.jpg (29485 bytes)
(Click on above thumbnails to enlarge photos)
TECHNICS RS-M68 CASSETTE DECK PARTS
Parting Out

Great looking deck. Lights up. Motors all run. Transport engages, but does not rewind. Tape was playing, but needs transport adjustment in addition to rewind problem as door won't close completely with a tape in upon re-assembly while on the bench.

Knobs / Caps / Buttons / Covers / Covers, 'Input Select' Silver, plastic toggle cap - $25.

Potentiometer / Control, Input / Record Level potentiometers, Ganged, 50k Ohms x2 - $30. SOLD

Potentiometer / Control, Output Level Input potentiometer. Ganged, 10k Ohms x2 - $30.

Switches / Selectors, Input Selector Switch assembly for "Line" or "Mic" - $30.

 Selling for parts. Email or phone for part needed.
Transport sold, but motor and most other parts still in stock. 






(Click on above thumbnails to enlarge photos)
TECHNICS RS-M205 CASSETTE DECK PARTS
Parting Out

Great looking deck. Lights up. Motors all run. Transport problems and has been partially disassembled internally. Parting out. Email or phone for part needed.
SOLD COMPLETE DECK

 
 

Technics RS-M228X Cassette Deck small jpg

Technics RS-M228X Cassette Deck Collage small jpg


NEW LISTING 2/10/18
(Click on above thumbnails to enlarge photos)
TECHNICS RS-M228X / RSM228X CASSETTE DECK PARTS / SPARES
#...8257
- PARTING OUT -


Panel, 'Red' Plexi lens for VU meter display - $20.

Panel, Front / Face plate with transport control buttons intact. Meter / counter plastic cover / window good with light surface scratches to plexi, and minor nicks around the edges of aluminum but nothing distracting.  - $55.

OR

Controls
, Transport control buttons ONLY as a set. - $35.

Knobs / Caps / Buttons / Covers / Covers, Tape Transport / Control / Function buttons
- (see listing above under "Controls"


Knobs / Caps / Buttons / Covers / Covers, 'Power' Silver, plastic button on black, plastic, 'push' rod - $25.

Knobs / Caps / Buttons / Covers / Covers, 'Rec Mute' Silver, plastic button on black, plastic, 'push' rod - $25.

Knobs / Caps / Buttons / Covers / Covers, 'Input Select' Silver, plastic button on black, plastic, 'push' rod - $25.

Knobs / Caps / Buttons / Covers / Covers, Noise Reduction Selector Knob - $25.

Knobs / Caps / Buttons / Covers / Covers, Input Level Knob set (front and back) - $20. SOLD Surface scuffs / striations

Knobs / Caps / Buttons / Covers / Covers, Output Level Knob - $20.

Knobs / Caps / Buttons / Covers / Covers, Eject button - $20.

Potentiometer / Control, Input Level Input potentiometer, 20k X2 - $30.

Potentiometer / Control, Output Level Input potentiometer, ALPS #QWKGTAO24A14A 10k X2 - $30.

Switches / Selectors, Power Switch ALPS TV-3 SDL1P / QSW1117AU - $30.

Switches / Selectors, Record Mute, 'Momentary', 'Push' Switch - $30.

Switches / Selectors, 'Input / Source' Selector Switch - $35.

Switches / Selectors, Noise Reduction Selector Switch - $40.

Rod / Wire, Record Switch 'Actuator' rod / wire - $20.


Well window, Cassette 'well' plastic cover / window. Light surface scratches to plexi, but nothing distracting. Lower 2/3 Aluminum plate clean as is 'silk screening'  - $30.


Frame
, Door Frame, with 'rack and pinion gear damper' and spring (part that holds the tape and 'hinges' down)
- $35.

Meters / Display, VU / Rec / PB level meters fluorescent tube mounted to circuit board; QJIM0146NNP IC CHIP: AN6870N, and balance of transistors, resistors, capacitors, diodes etc. - $45.

Counter, Tape Counter - $35.

TECHNICS RS-M228X / RSM228X PARTS / SPARES

Motor, Main capstan Drive motor MMI-6A2LKPA Mitsubishi MMI-6A2LKPA DC 12V (see also Panasonic RS-B10, P
anasonic RX-5085, Technics RS-M6, RS-B14, RS-B48R, RS-M205, RS-M218, RS-M226, RS-M228X, RS-M234X, RS-245X, RS-M255X, RS-M263?, and likely many others) - $35.  SOLD / MIA??? 1/19/2021

Transport mechanism, (less heads, Supply and Take-Up reel 'tip' assemblies, including tape reel caps / springs, well door frame, pinch roller mechanism, counter & motors) - $45. (some other parts available individually until transport sells) SOLD / MIA??? 1/19/2021

Hub Caps / Spindle Caps, Supply Spindle 'upper' parts - $30. ea. set  SOLD / MIA??? 1/19/2021

Hub Caps / Spindle Caps, Take-up reel / Spindle 'upper' parts - $30. ea. set  SOLD / MIA??? 1/19/2021


Heads, "MX" PB/ REC Head / Head-Stack / Head stack QWY4122ZB - $40. (Avg wear. Still many miles left))
 SOLD / MIA??? 1/19/2021

Heads
, Erase
Head / Head-Stack / Head stack - $40. (Like new)  SOLD / MIA??? 1/19/2021

Pinch Rollers / Arms, Pinch roller / arm assembly w/ spring. - $25.  SOLD / MIA??? 1/19/2021

Transformer, Power transformer QLPW23ELE / TKP0228-30, on Circuit board - $45.

Circuit Boards, 'Main' Circuit board, with Playback Amp, Record Amp, Bias Circuits, Dolby circuits, Gain adjustments, Power Supply 'Filter' components, Record Switch and much more. Includes IC chips; Dolby NE646N, AN6256, M5218L, M5219L, and transistors; 2SA886, 2SA999, 2SC1847, 2SD592, 2SD965, 2SK104, and balance of other transistors, capacitors, resistors, diodes, PC mount 'trim' pots etc. (does not include user switches / selectors, user control pots, I/O jacks). - $55.

Circuit Boards, 'dbx NR' Circuit board, QJIM0144NNP. Includes IC chips; dbx 146732, 146742, and transistors; 2SC949, 2SD51010, and balance of other transistors, capacitors, resistors, diodes, PC mount 'trim' pots etc. - $45.


Jacks / Terminals / Connectors, Mic Input Jacks - $25.
pair

Feet, Rubber feet / pods w/ screws (There's only 2 on the 'right' side of the unit that are 'removable')  - $20. set of 2

Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

 Location: PB, SW group, 3rd cab from center, Black, 4th drawer, right side. - Revised 3/18/19

 

Technics_RS-M234X_DBX_Cassette_Tape_Deck_web.jpg (22778 bytes)      Technics_RS-M234X_DBX_Cassette_Tape_Deck_collage.jpg (169482 bytes)

(Click on above thumbnails to enlarge photos)


TECHNICS RS-M234X / RSM234X PARTS / SPARES

SOME PARTS MAY BE INTERCHANGEABLE WITH OTHER PIONEER "RS-M" SERIES, BUT YOU'LL NEED TO DO YOUR OWN RESEARCH
PART NUMBER / CROSS
REFERENCE INFORMATION ONLY!!!!
NO parts DIRECTLY available from a 'Salvaged' / 'Scrapped' Technics RS-M234X currently


Switch,
Power Push Switch, SDL1P / TV-3 -
Reference info ONLY. Not currently available from this menu.

Circuit Board, Input / Balance Potentiometer Circuit board QJIM0182NNP -
Reference info ONLY. Not currently available from this menu.

Circuit Board,
Main Circuit board QJIM0177NNP, w/ transistors; 2SB941, 2SD1265 & IC; Dolby Chip NE635N / K8309, Dolby Chip NE654N, M5220L, M5218L -
Reference info ONLY. Not currently available from this menu.

Circuit Board,
Circuit board QJIM0174NNP w/ transistors & IC; dbx Chip AN6391, M5218L -  
Reference info ONLY. Not currently available from this menu.

Circuit Board,
Power Supply Circuit board QJIM0173NNP -
Reference info ONLY. Not currently available from this menu.

Transformer,
Power Supply Transformer, QLPW26EKC / 48A-024NP -
Reference info ONLY. Not currently available from this menu.

Motor,
Mitsubishi motor MMI-6A2LKPA DC 12V (see also Panasonic RS-B10, P
anasonic RX-5085, Technics RS-M6, RS-B14, RS-B48R, RS-M205, RS-M218, RS-M226, RS-M228X, RS-M234X, RS-245X, RS-M255X, RS-M263?, and likely many others) - Reference info ONLY. Not currently available from this menu.-

Jack / Circuit Board,
Headphone Jack / Circuit board QJIM0176NNP -
Reference info ONLY. Not currently available from this menu.

 

 
Technics_RS-M255X_Cassette_Deck_Salvage_web.jpg (26173 bytes)

Technics_RS-M255X_Cassette_Deck_Salvage_collage.jpg (76058 bytes)

(Click on above thumbnails to enlarge photos)
TECHNICS RS-M255X CASSETTE DECK FOR REPAIR OR PARTS
W/ DBX
#...4839

SOLD 8/8/11

Great looking deck. Lights up. Motors all run. Transport problems in that a tape will run, with some internal manipulation, but as soon as you go to stop and try and start again the tape won't travel, unless you again manually start it inside. Problem unknown. Features Dolby, DBX, Digital counter, Fluorescent meters, IC Logic tape controls and much more. Selling as is and complete for repair or parts.
 Looks great!
Selling as-is
$45.
SOLD 8/8/11



 

 




NEW LISTING 1/22/15
TECHNICS RS-B48R / RSB48R CASSETTE RECORDER SALVAGE PARTS / SPARES


Bonnet / Cover, Sheet metal, silver, clean
(attachment screws sold separately) - SOLD

Panel, ‘Front / Face panel’, w/ display / meter window. Minor scuffs, small edge dings
(less transport, controls, meters, buttons, switches, jacks / plugs, sold separately) -$35.

Panel, Aluminum ‘Transport’ function panel / overlay
-$25.

Panel, Aluminum end trim / cap for right side of face panel (minor scuffs)
- $20. SOLD

Panel / Display, Futaba QSIFL013F Fluorescent tube readout ‘record level’ display on circuit board#QJIM0214NNP PWB-D with transistors  2S115, 2SC2320, IC AN6870N and balance of board mounted capacitors, resistor, diodes - $45.

Circuit Board, ‘Main’ Circuit Board, PWB-A, #QJIM0211NNP with transistors: 2SA124, 2SA933, 2SA1309, Mitsubishi 2SB941, 2SC114, 2SC945, 2SD1225, Mitsubishi 2SD1265, 2SD1275,  2SD1468,2SJ40, 2SK3ZA, 2SK81, 2SM21, Mitsubishi 2SA921, Mitsubishi 2SD1011, horizontal package Mitsubishi M5218L, Mitsubishi M5220L, IC AN6270, AN6271, dbx AN6291,TEA0665 Dolby chip,  MN1405RMS with balance of board mounted resistors, capacitors, diodes, small variable resistors, adjustable core transformers
(less jacks / connectors, slide pots, switches / selectors, headphone and microphone jacks / connectors - $65.

Circuit Board, ‘Control’ circuit board, PWB – C #QJIM0213NNP, includes transistor 2SM11, LEDs green, red, yellow, white, momentary switches with other board mounted resistors,
(counter sold separately) - $40.

Circuit Board, ‘Forward’, ‘Reverse’ switching circuit board #QMIM0216NNP .OWB-E
(switches sold separately) - $30.

TECHNICS RS-B48R CASSETTE DECK SALVAGE PARTS / SPARES

Counter, 3 digit with pulley
- $20.

Knobs / Caps / Buttons / Covers / Covers, ‘Power’ cap
(switch, switch extension sold separately) - $20.

Knobs / Caps / Buttons / Covers / Covers, ‘Input’, ’Balance’ slider / linear fader pot cap
(input slider pot sold separately) - $18. ea.

Knobs / Caps / Buttons / Covers / Covers
, ‘Timer’ slider switch cap
(input slider pot sold separately) - $18. ea.

Knobs / Caps / Buttons / Covers / Covers, ‘Power switch ‘extension’, plastic
(power switch sold separately) - $15.

Extensions, ‘Tape selector’ / NR / DOLBY / DBX switch ‘extensions
(less switches & caps sold separately) - $15. ea.

Knobs / Caps / Buttons / Covers / Covers
, ‘Transport Mode’ switch caps, gray plastic
- $15. ea.

Knobs / Caps / Buttons / Covers / Covers
, ‘Eject’ button- $20.

Knobs / Caps / Buttons / Covers / Covers, ‘Transport’ buttons / caps (charcoal, red, orange) - $12. ea.


TECHNICS RS-B48R CASSETTE DECK SALVAGE PARTS / SPARES

Switches / Selectors, ‘Power’ push switch SDL1P TV-3 4A/32A250V
(cap / button, extension sold separately) - $25.

Switches / Selectors, ‘Reverse Mode’ Forward / Reverse push switches
(selectors, caps / buttons sold separately) - $25. ea.

Switches / Selectors, ‘Noise Reduction’ locking push switches, set of 4
(less circuit board) - $35. set of 4

Switches / Selectors, ‘Timer slide switch
(less cap / button) - $20.

Switches / Selectors, ‘Tape Select’ locking push switches, set of 3 - $25. set of 3

Potentiometer / Controls, ‘Record level’, linear fader potentiometer 50Ka
(less extensions, cap sold separately) - $25.

Potentiometer / Controls, ‘Balance’ linear fader potentiometer, 40t 100kw
(less extensions, cap sold separately) - $20.

TECHNICS RS-B48R CASSETTE DECK SALVAGE PARTS / SPARES

Transformer, Power Transformer, HIKARI MUM052-2 QLPP61ELX with circuit board  #QJIM0212NNP PWB-B - $45.

Heads / Headstack, (INCLUDED W/ TRANSPORT, SHOWN BELOW)

Transport, ‘Transport’ w/ heads (less motors) - $45.


Motor, Capstan Motor Mitsubishi MMI-6A2RK, DC 12V, CW - $35. SOLD

Motor, ‘Fast Wind’ Motor Mitsubishi MMI-6C2LKE, DC 10V - $35.

Motor, ‘Transport’ Motor Mitsubishi MMI-6C2LKC, DC 8V - $35.


Jack / Connector, RCA Input / Output  connectors / jacks 2 pair set - $ 25.

Jack / Connector, ‘Microphone’ ¼ inch jack - $25. ea.

Jack / Connector, ‘Headphones’ ¼ inch jack - $25.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, South, 3rd cab / pink, 3rd drawer, left-half - Revised 3/18/19

 

 

 



 


 

NEW LISTING 1/22/15
TECHNICS RS-TR157, RSTR157 CASSETTE RECORDER SALVAGE PARTS / SPARES


Bonnet / Cover, Sheet metal, brown, scratched
(attachment screws sold separately) - SOLD

Bonnet / Cover, ‘Attachment’ screws
(bonnet sold separately) - $20. set

Panel, ‘Front / Face panel’, plastic, matte black  / black
(less transport, controls, counter,  meters, buttons / caps, switches, bay doors all sold separately) -$35.

Panel / Door, Cassette ‘Bay / Well Door’ ‘Deck 1’ or ‘Deck 2’ - $20. ea.

Dampers / gears, Cassette ‘Bay / Well Door’ dampers - $15. ea.

Counter, Tape counter - $25.


Knobs / Caps / Buttons / Covers / Covers, ‘Power’ cap
(switch, switch extension sold separately) - $20.

Knobs / Caps / Buttons / Covers / Covers, ‘Record level’ caps / knobs
(pots sold separately) - $15. ea.

Knobs / Caps / Buttons / Covers / Covers,  Plastic ‘Transport Buttons’
(molded as sets) - $20. per set / side

Knobs / Caps / Buttons / Covers / Covers,  Black, Plastic ‘Eject Buttons’ - $15. ea.


TECHNICS RS-TR157, RSTR157 CASSETTE RECORDER SALVAGE PARTS / SPARES

Switches / Selectors, ‘Timer’ Record / Off / Play ‘slide switch’ on circuit board #RJBOO36AD
( buttons / caps sold separately) - $20.

Switch / Selectors, ‘Power’ locking push switch on circuit board #RJBOO36AE
(less button / cap) - $20.

Switches / Selectors, ‘Eject’ mechanism, 2 deck metal levers on chassis w/ nylon extensions
(black, plastic buttons sold separately) - $20. for both

TECHNICS RS-TR157, RSTR157 CASSETTE RECORDER SALVAGE PARTS / SPARES

Circuit Board, ‘Main’ Circuit Board, #RJBO138B with transistors: 2SA114, 2SA1309, 2SB1357, 2SB621, 2SB1030, 2SC114, 2SC3311, 2SD592, 2SD1450, 2SD2037, 2SJ164, IC AN7351K, AN7384, Mitsubishi M50746-145SP, Philips TEA0657 / DOLBY NR chip,  with balance of other board mounted resistors, variable resistors, adjustment transformers, capacitors, diodes
(less filter capacitors, jacks / connector, voltage adjuster, AC socket) - $55.

Circuit Board, ‘Display’ / ‘Record Level’ circuit board # RJBOO36AA with #LN261478PH-90 LEDS for record level, tape direction, DOLBY, deck 1 / 2 and transistors: 2SA114, IC AN6888 and balance of board mounted capacitors, diodes, and resistors
(switches sold separately) - $35.

Circuit Board, Deck-2 ‘Control’ circuit board, #RJB0036AB with transport controls / tactile / momentary switches; ‘Play’. ’Stop’, ‘Cue / Rewind’, ’Pause’, ‘ Record’, ’Reverse Mode’, ‘DOLBY’, ‘Record Level’ pots
(less front / display panel, buttons / caps, bay doors) - $45.

Circuit Board, Deck-1 ‘Control’ circuit board, #RJB0036AC with transport controls / tactile / momentary switches; ‘Play’. ’Stop’, ‘Cue / Rewind’, ‘Record Level’ pots
(less front / display panel, buttons / caps, bay doors) - $25.

Transformer, SLT5K254K  KK II3 adjustable voltage with connection pins - $35.

Heads, ‘Playback’ head #H4C 35GYA 91210 - $30.

Head, ‘Record / Playback head #003 - $35.

Transport  / motor, MMIM-5B2LWNI DC 12V - $35. ea.

Transport assembly, Less motors / heads - $35. ea.


TECHNICS RS-TR157, RSTR157 CASSETTE RECORDER SALVAGE PARTS / SPARES

Jack / Connector, RCA Input / Output  connectors / jacks 2 pair panel - $ 25.

Jack / Connector, ‘Remote’ / ‘Syncro-Edit’ 1/8” jack / connector
- $15. ea.

Panel, ‘Rear’, sheet metal
(less connectors, outlets) - $20.

Panel, ‘Bottom’ sheet metal – SOLD

Socket / Jack, ‘AC’ socket / jack /connector 2 pin input to main circuit board
- $25.

CORD, ‘AC’ molded 2 pin, black ‘Figure-8 / Infinity’- $20.


Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.

Location: PB, East, Inside Island, Simplicity, Drawer 1, Middle. - REVISED 9/18/19

 

 

 

 


TECHNICS SL-B3 TURNTABLE PARTS / SPARES

SOME PARTS MAY BE INTERCHANGEABLE WITH OTHER TECHNICS "
SL" SERIES SUCH AS;
(SL-B1, SL-B2, SL-B3 ETC.)

PART NUMBER / CROSS REVERENCE INFORMATION ONLY!!!!
NO parts DIRECTLY available from a 'Salvaged' / 'Scrapped' TECHNICS SL-B3 currently


Motor,
Motor, Mitsubishi DC12V, MMX-3H2RPA -
Reference info ONLY. Not currently available from this menu.

Unless specifically noted, we do not typically sell 'component level' parts such as resistors, diodes, transistors, semiconductors, ic's / integrated circuit chips, ceramic capacitors, led's, bulbs, lamps, belts, etc. We do commonly sell circuit boards / cards which will likely come with those parts attached.
 

MAY
*
*
When we say "some parts "MAY" also fit", that does NOT mean ALL the parts listed 'WILL' fit, and unless we show specific info that a particular part DOES 'cross-pollinate', do not infer that it does or will fit. Only careful research and comparisons, on YOUR part with service manuals, service bulletins, other comparable units, etc., MAY indicate a POSSIBLE substitution. If your situation is 'critical', do not base your decision on information found on this or any other page of this web site and do your own research.

 



HERE     ARE     SOME     ADDITIONAL     RESOURCES     FOR     REPAIR    /    RESTORATION
 
 
 __________________________________________________________________________________________________________





 

  


SERVICE NOTES:

WARNING: Electronic equipment carries dangerous and potentially lethal electrical currents. You should never open any electronic unit without proper knowledge of electronics and the hazards of electricity! 
Any repair / restoration should be undertaken ONLY by a QUALIFIED ELECTRONICS TECHNICIAN!

Random Service Notes on Technics units we have serviced:

Technics RS-B68R & RS-B78R Cassette Tape Deck; Both use same power transformer and motors. Many other parts are likely interchangeable. Significant parts: Power Transformer: HIKARI MUM052-5 / QLPP64ELX. Capstan motor: MM1-6A2RK & Reel Motor: MMN-6C2LKE

Technics RS-M255X Cassette Tape Deck; The one we serviced came out great, but was not one of the easier cassette decks to service. Fairly involved and most serviceable assemblies 'buried'. To remove the tape well door / window, grasp at the bottom edge and pull. It is firmly held in by two 'horizontal' plastic 'barbs' (most tape door / windows simple 'push-up' to remove).
We were not able to 'readily' obtain a main capstan belt, however the currently installed belt was in very serviceable stated, so we 'reconditioned' it. We completely removed the tape transport to access the belt.
We also removed the first couple of 'layers' from the front of the transport to gain access to the reel / hub drive tires. The tires were removed from their wheels, and reconditioned. This also allowed access to clean most of the moving parts of the transport of old lubes, and re-lube. At this time we also reconditioned the pinch rollers, prior to reinstalling the transport assembly.
There are two ways to access the input fader / pots for cleaning. Either by removing the entire front panel and 'meter / switch section' or by removing the bottom sheet metal, then lowering the main circuit board. The latter is probably the easiest in hindsight.
Meter level adjustment pots are VR-301 & 302.
The face panel must be removed to access the capstan motor speed control which is in the rear of the motor, but since they designed the transport 'stupidly' with the motor facing 'backwards', you can't get to the adjustment without removing the face plate.
The entire service took about 8 hours including completing the balance of what we typically do to cassette decks. That could probably be reduced by a couple of hours knowing the above 'tricks and tips'.
Significant parts: Capstan motor = MM1-6A2LKPA
(also used in RS-M245X)


 

 
 

 

 


 

LINKS TO OUR 'HI-FI' DEPARTMENTS

Amps and
Pre-Amps

Receivers

Cassette
Decks

Tuners

Turntables

8-Track Decks

CD Players

Reel-Reel
Decks

EQs and Signal
Processors

Speakers

Betamax and
VHS VCRs

Turntable Cartridges

Tube Audio

Ne'cessories

Speaker Parts

Record Players

Vintage Radios

Vintage
Walkmans

Headphones

Stereo Parts


Wondering where the "tone" you remember went?....


 

.... Surround yourself with Silver and find it again!


CONTACT INFO BELOW

$20. MINIMUM ORDER

 

                                             

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.


    Before calling, PLEASE read the text in below.      
 BEFORE
CALLING

(800) 806-4231 EXT #1
~10:00 AM- ~5:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE


OR

BEFORE EMAILING
 
parts@oaktreevintage.com

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)

*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

We DO NOT have your part unless the following conditions are met:

A) You HAVE SEARCHED our page(s) and HAVE FOUND the part you are looking for SPECIFICALLY listed on one of our pages or you have solid information that it's a 'bona fide' substitution for your part (unless noted already, we won't have any further info along those lines)
AND
B) The part that you have found is NOT marked as SOLD or SOLD OUT.


If you do NOT see it listed after thoroughly searching the pertinent page
(likely the page you landed on originally),  
we do not have it,   
nor do we know when
it might come in,   
nor do we maintain "waiting lists" for parts,    
nor do we know who
might have it.

Sorry, but phone and email traffic for parts
we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.


 We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!


ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT
lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms may automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings".
We do not return calls / emails for requests for parts we don't show / or have available (we may choose contact with further, useful information).


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |  KEYBOARD PARTS 

___________________________________________

Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.


Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.


 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |   SELLING-TRADING-CONSIGNING   |  KEYBOARD PARTS   I   FAQ'S  
  CONDITION RATINGS   |   ORDERING / POLICIES    |    WARRANTIES / RETURNS   |   SHIPPING     
 RESTORATION PROCEDURES   |   REPAIRS  | CONTACT PARTS


As much of the price charged for parts is for the 'time to extract' from it's donor unit, unless we send the 'wrong part', parts are NOT returnable.
See our "
Warranties / Returns" page via the link below for more details.


POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately
. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent
research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
 

Copyright © 1997-2023 Oak Tree Enterprises, LLC

COPYRIGHT INFORMATION


 

 



 


LINKS        TO        SOME        OF        OUR        OTHER        STEREO        PARTS        LINKS
 
 __________________________________________________________________________________________________________