BRAND NEW - Replacement Pioneer RT-909 / RT-901 Pinch Rollers for the
Pioneer RT-909 / RT-901 Reel-to-Reel tape deck
with NEW BELT & VERY GOOD instructions and 'hints /
tricks' that will save you 'gray hair' and money!!!
These are BRAND NEW (not rebuilds),
fresh rubber, Pinch / Pressure rollers with new rubber and new brass bushings
for your Pioneer RT-909 / RT-901
Reel to Reel Deck. If yours have never been replaced or
are over 8-12 years old, it's time. If your pinch-rollers are causing mis-tracking,
slipping, excessive Wow & Flutter, are "gummy", cracked, glazed hard,
have rounded-off edges or disintegrating and your belt
has turned to "tar",
then here you go! Breathe
new life into your classic Pioneer RT-909 RT-901 tape recorder.
Our kit comes with a new, fresh belt (replaces the
Pioneer REB-361), and diagrammatical, abbreviated instructions / hints and
tricks that will make the job much more 'do-able'. Phone support also
available if needed once you've read the instructions. These
are now discontinued from
Pioneer, so get them while you can.
These rollers are new
aftermarket to original spec.
These are replacements for the Pioneer RXB-325 / RXB-194. Sorry
they will not fit the
Pioneer RT-707 /
RT-701. Only
the
Pioneer RT909 & the RT901.
For rubber, pinch / pressure rollers to fit the Pioneer RT-707,
click here...)
|
Domestic US Customers |
|
International
Customers |
A pair of replacement,
Fresh / New Rubber Pinch Rollers for the
Pioneer RT-909 Reel-to-Reel tape deck
PRICE INCLUDES:
SHIPPING
AND
NEW Main Drive Belt
Your Price
$98.99
(includes shipping to any of the US states)
|
A pair of replacement,
Fresh / New Rubber Pinch Rollers for the
Pioneer RT-909 Reel-to-Reel tape deck
PRICE INCLUDES:
SHIPPING
AND
NEW Main Drive Belt
Your Price
$106.99
(includes Airmail shipping to any other worldwide location)
|
IF YOU PREFER TO PLACE YOUR ORDER BY PHONE,
PLEASE CALL US AT:
(800) 806-4231
- Press Option '2' for 'SALES' to order -
~10:00 AM- ~5:30
PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE
"Hello Oak Tree Vintage, Just
wanted to say thank you for ultra fast shipment on the Pioneer RT-909
replacement pressure rollers received on Friday 7/22. The 909 deck restoration was
completed on Saturday without any further issues regarding critical back tension
and take-up torque adjustments resulting in tape roll off that I have had with
most of these decks in the past. I sat and listened for several hours of final
testing after while eating the candy enclosed with the rollers. Again, thanks so
much for your professionalism and I look forward to doing more business with you
in the future. Regards," - Reggie@ Electronic Servicing Strategies
"Hi, Received the new Capstan Pinch rollers for my
Pioneer RT-909 reel to reel deck. It is playing right now and plays great!
The old capstan wheels were sticky and the tape would miss track and go off
the heads. Thanks," - Teran H.,
North Dakota
*NOT INCLUDED IN ANY OTHER
COMBINED PARTS DISCOUNTS OR SALES
(sorry, we do not have, nor can give out any instructions or advice on the
actual repair procedures beyond the scope of the included instructions)
