|
|
Purveyors of Electronic, Musical
and Vintage goods
from then, now and in between.
Since 1982.
PIONEER SPEAKER PLUGS / ADAPTORS
/ CONNECTORS
- SHORT PROOF SPEAKER CONNECTORS FOR PIONEER RECEIVERS AND AMPLIFIERS
Replacement Pioneer Speaker
Plugs / adaptors / jacks. Pioneer AKM-003 / K72-007. Short-Proof
speaker connectors for early-mid 1970's Pioneer receiver and amplifier models
H-7000, H-R9000,
QA-800, SA-100, SA-302 & 302R, SA-500, SA-600, SA-700, SA-800, SA-900, SA-1000,
SX-300T, SX-400, SX-424, SX-440, SX-525, SX-626, SX-727, SX-770, SX-828, SX-990,
SX-1000 1000TD & TW, SX-1500, 1500TD, SX-2500, SX-3000 (European version of the
SX-626), SX-6000, SX-9000, QX-4000, QX-8000, QX-9000 & QX-9900.
(Above text, in it's entirety, property of
www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright
Information' page for details)
|
|
|
|
NEW ITEM
PIONEER SPEAKER PLUGS / CONNECTORS FOR VINTAGE PIONEER
STEREO RECEIVERS
WITH 12', 16G, AUDIO-GRADE SPEAKER WIRE PRE-ATTACHED AND READY FOR CONNECTION!
Replacement for Pioneer Speaker Plugs / Adaptors AKM-003
MADE IN
USA
These are 'pre-wired' replacement
plugs / speaker wire assemblies for the
very hard to find Pioneer receiver /
amplifier to speaker, short proof adaptor plugs /
connectors / jacks. These are each
pre-wired with twelve feet of USA MADE, Pure Copper (not copper plated
aluminum), 'Audio-Grade', 16 Gauge, Stranded Speaker wire. The wire is 'pre-assembled to connectors (professionally soldered, with no
'stray whiskers / strands', that was common with the originals if you weren't
careful), and tagged with red shrink wrap for 'Right'
Channel, and black shrink wrap for 'Left' Channel on each end. The polarity is
also indicated on the wire. The other end is 'pre-stripped' for connection to
your speakers. The blades are slightly 'narrower' on
these (rated for 10 AMPS each pin, so will be more than enough for anything
Pioneer ever made), but fit is perfect, and they hold as well as the originals. We have used
them for a few years on our restored / refurbished Pioneer Stereo Receivers /
Amps from that period and they work GREAT! If you have an old Early-Mid
1970's Pioneer receiver / Amplifier that uses these, and have
lost yours or need an additional set - here you go!
These receiver / amplifier / speaker plugs were used
on Pioneer
receiver and amplifier models
H-7000,
H-R9000,
QA-800, SA-100,
SA-302 & 302R, SA-500, SA-600, SA-700,
SA-800, SA-900, SA-1000, SX-300T, SX-400, SX-424,
SX-440, SX-525, SX-626,
SX-727, SX-770, SX-828, SX-990, SX-1000 1000TD & TW,
SX-1500, 1500TD, SX-2500,
SX-3000 (European version of the SX-626), SX-6000, SX-9000,
QX-4000, QX-8000,
QX-9000 & QX-9900 and may
fit others as well.
(Above text, in it's entirety, including 'fit list' property of
www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright
Information' page for details)
NO SOLDERING REQUIRED!
MADE IN THE USA WITH USA MADE PARTS
BRAND NEW
$69.99 A PAIR, SHIPPED
Shipping within the United States is
included in price.
For other shipping destinations, please call or email for shipping cost.
(Above text, in it's entirety, property of
www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright
Information' page for details)
($7.50 built-in to purchase
price for shipping domestically, and $21.50 for international.)
|
USED / ORIGINAL PIONEER
SPEAKER PLUGS / CONNECTORS FOR VINTAGE PIONEER STEREO RECEIVERS
Replacement Pioneer
Speaker
Plugs / Adaptors AKM-003
The
very hard to find Pioneer receiver /
amplifier to speaker, short proof adaptor plugs /
connectors / jacks. These are
'original take-offs' we have collected over the past 18 years. Some will have
light surface rust and / or chipped bake-lite fins. Some will have 'slotted
screws' and some will have 'Philips' screw heads (they will be shipped in
'matched' pairs as far as screw type).
If you have an old Early-Mid
1970's Pioneer receiver / Amplifier that uses these, and have
lost yours or need an additional set - here you go!
These receiver / amplifier / speaker plugs were used
on Pioneer
receiver and amplifier models
H-7000,
H-R9000,
QA-800, SA-100,
SA-302 & 302R, SA-500, SA-600, SA-700,
SA-800, SA-900, SA-1000, SX-300T, SX-400, SX-424,
SX-440, SX-525, SX-626,
SX-727, SX-770, SX-828, SX-990, SX-1000 1000TD & TW,
SX-1500, 1500TD, SX-2500,
SX-3000 (European version of the SX-626), SX-6000, SX-9000,
QX-4000, QX-8000,
QX-9000 & QX-9900 and may
fit others as well.
(Above text, in it's entirety, including 'fit list' property of
www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright
Information' page for details)
NO SOLDERING REQUIRED!
ORIGINAL, VINTAGE & USED
$49.99
A PAIR PLUS SHIPPING
SORRY, AS
OF 3/2/2021 WE ARE SOLD OUT
SORRY, AS OF 3/2/2021 WE ARE SOLD OUT
(The 'pre-wired' version show nearer the top of
the page is actually the better deal anyway.)
(Above text, in it's entirety, property of
www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright
Information' page for details)
|
>>>(for 'PARTS';
<<<
as of NOW and for the next 60-90 days,
due to staffing / time / resource limitations, we are shifting focus
AWAY from MOST
'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions,
and will not likely be responding to calls or emails for those type of
parts. We will still process orders for '**non-unique
/ SKU' parts / accessories that offer an 'on-line payment' option.)
*at
our discretion, some requests my still get a response if time allows.
*"unique"
would apply to most 'salvage' Hi-Fi / Stereo /
Speaker, scooter, MI, Pro-audio
parts.
Parts that we normally stock and have a "Buy It" option are not
included in the above notice.
Before calling,
PLEASE read the
text in below.
BEFORE CALLING
(800) 806-4231 EXT #1
~10:00 AM- ~5:30
PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE
OR
BEFORE EMAILING
parts@oaktreevintage.com
>>>(for 'PARTS';
<<<
as of NOW and for the next 60-90 days,
due to staffing / time / resource limitations, we are shifting focus
AWAY from MOST
'SALVAGE / USED / DONOR' parts requests at this time with
*only a few exceptions,
and will not likely be responding to calls or emails for those type of
parts. We will still process orders for '**non-unique
/ SKU' parts / accessories that offer an 'on-line payment' option.)
*at
our discretion, some requests my still get a response if time allows.
*"unique"
would apply to most 'salvage' Hi-Fi / Stereo /
Speaker, scooter, MI, Pro-audio
parts.
Parts that we normally stock and have a "Buy It" option are not
included in the above notice.
We
DO NOT have your part
unless the following
conditions are met:
A)
You HAVE SEARCHED our page(s) and
HAVE FOUND the part you are
looking for
SPECIFICALLY listed on one of our pages or
you have
solid information that it's a 'bona fide' substitution for your part
(unless noted already, we won't
have any further info along those lines)
AND
B) The part that you have found is
NOT marked
as SOLD or SOLD OUT.
If you do NOT see it listed after
thoroughly
searching the pertinent page
(likely the page you landed on originally),
we do not have it,
nor do we know when it might come
in,
nor do we maintain "waiting lists" for parts,
nor do we know who
might
have it.
Sorry, but phone and email traffic for parts
we don't have listed or for parts that
are already marked "SOLD"
has become too consuming of time resources.
We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check
the web page
periodically as we never know what will show up each day. Thanks!!!!!
ALSO: When e-mailing be sure to include a
relevant subject, ie: Brand /
Model number / reason for inquiry in the
'SUBJECT LINE'.
SUBJECT
lines left empty, or with 'single word' text like;
"Hello",
"Hi", "parts", "stereo", "inquiry", "question",
"selling" or similar or similar 'un-qualified' terms
may
automatically be deleted by Anti-Virus / Spam
settings or receive 'Low Priority'.
(Subject lines left empty show up as
"No Subject" and are deleted
automatically by our anti-spam settings".
We do not return calls / emails for requests for parts we don't show / or
have available (we may choose contact with further, useful information).
SPEAKER PARTS |
STEREO / HI-FI ELECTRONIC PARTS
| KEYBOARD PARTS
___________________________________________
Haven't received a response to your email? See
FAQ'S
MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.
Before ordering by postal
mail, please phone or email us about the item and the details of sending your funds. Thank-you.
SPEAKER PARTS
| STEREO / HI-FI ELECTRONIC
PARTS |
SELLING-TRADING-CONSIGNING
| KEYBOARD PARTS
I FAQ'S
CONDITION RATINGS |
ORDERING / POLICIES
|
WARRANTIES / RETURNS |
SHIPPING
RESTORATION PROCEDURES
|
REPAIRS |
CONTACT PARTS
As much of the price
charged for parts is for the 'time to extract' from it's donor unit, unless
we send the 'wrong part', parts are NOT returnable.
See
our "Warranties / Returns" page via the link below for more details.
POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION
AND PRICING SUBJECT TO
CHANGE AT ANYTIME AND WITHOUT PRIOR
NOTICE
and changes may not be posted to web immediately. Information such as
Parts Substitution possibilities, "Circa" dates, original values, etc. are to the
best of our knowledge. If you are critically concerned, you should do independent
research on your own prior to ordering or utilizing
this information in any way. Manufacturers also are
known to change
part numbers, specs, circuit designs, specs etc within the same model.
