A NOTE ABOUT POLK AUDIO SPEAKERS: 
Polk woofers can be very susceptible to damage from 'shock'. A speaker that has been dropped, even from a short distance or bumped severely, may likely have damage to the woofers. Even dropping them from as little as 6" can do it. This can even happen when the box is unloaded from the delivery truck / loading dock or when being hand-trucked down stairs or off a curb. This occurs because the glue / epoxy the original mfg used to secure the magnet structure to the back plate of the frame is now 'decades' old and gives way. This usually manifests itself in a woofer cone that is "frozen" and will not move. DO NOT connect a speaker that has a woofer with these symptoms to your amplifier, as the voice coil of the driver may be shorted across part of the internal motor structure of the speaker and may present a lower impedance to your amplifier than it is designed to accommodate. The above issue is prevalent on most of the classic Polk Audio models utilizing the 6500 series drivers, ie; 6502, 6502, 6503, 6505 etc., and possibly others.
If you just bought a pair and they arrived with the woofers / mids 'locked-up' with the voice coils 'frozen', it's probably not necessarily anyone's fault. We generally default to the attitude that, "if something gets damaged in shipping, it's almost always the fault of the 'packer' and not the carrier. Yes, of course the carrier / shipper dropped it, kicked it, ran over it, etc. That is what happens and everyone should realize that. Items need to be packed so they can be 'dropped / kicked / ran-over' etc and still survive intact".
However,...
the epoxy on the 'vintage' Polk drivers is old and may be one tiny vibration from releasing, even under normal use, so it's difficult to place blame on either the seller / packer or the shipper, but again, if they aren't packed well in the first place, then there's certainly little hope of safe arrival even with the most careful handling.
We have started 'proactively' using a 'liquid metal' epoxy, such as JB weld (but NOT 'JB Weld', as there's one that works better for a couple of reasons) around the seams between the magnets and plates on all of our Polk speakers and parts-woofers when they come into stock.
We do not know if the problem has been rectified on the newer drivers (woofers). We spoke with someone at Polk recently about this and that person said they could not verify one way or the other whether they had changed epoxy types or designs. Just FYI.

*Note about parts / spares sales

* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.

Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.

Parts, general condition / circuit board condition; Most of our parts are from 'salvage / donor' units. While we don't sell parts that are 'known' to be bad, occasionally parts will need further adjustment, cleaning, 'tweaking', or in the case of circuit boards, may need old, conductive glue / epoxy further cleaned, and some 'common' parts / components such as, aging / leaky capacitors, parts whose values have drifted, and some epoxy transistors may need to be replaced due to 'green / black / furry' legs, or because those parts were marked as 'sold separately'. Some circuit boards may have 'tired' "landing / solder pads", or severed traces, or cold / bad solder joints which can require solder re-flow or 'jumpers'. Unless noted, circuit boards will be 'crack / split / break' free.

Parts pricing; Most of our parts price / value will be based on a few things. Firstly, we are in the restoration / refurb business, so we consider what we would be willing to pay for the part if we needed it (which again, is what the parts are listed for in the first place, "our units"). Secondly, the rarity / value of the unit the part(s) fit. The 'Tuning Knob' for a receiver that has a final value of $350 will likely be much less than the "Tuning Knob" for a unit with a final value of $1500 or more (a set of tires for a typical sedan will be $400 to $600. A set for a Lamborghini can be $16,000). Thirdly, the 'rarity' of the part. Forth, the 'condition' of the part. Fifth, the difficulty to extract the part, or success rate for extracting certain parts. Sixth; frankly it's a LOT of work and time to part out a unit. Most take 1 to 3 days of shop time to process. Not only the disassembly, but the 4-15 hours of pre-testing / servicing and just as time consuming can be the amount of time it takes to do all of the research we do and the info we list on many parts for cross-referrencing to other units that my use the same parts by scouring service manuals. On many circuit boards we will list every 'semi-conductor' which is also very time consuming. Lastly, every call or email for a part can require 20 minutes to sometimes over an hour of 'phone support', often (about 70% of the time) with me convincing the potential purchaser that they don't need the part I have to solve their problem.
Sorry to sound like a "whiner" about selling parts, but "time is money".

Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' and most are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are commonly 'disproportionate' to their cost, typically nearly equal to and sometimes greater than the cost of the part.  Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight so are commonly just as expensive as shipping a 'complete unit'. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive).  It is what it is....

A non-response to an email of phone call / voice message request for a part that we don't show on one or our pages, or is already marked "SOLD" will be typical. We simply don't have the time / man-power resources to respond to every query we get for items we don't show as avail. Most folks get that. Having said that, I / we may respond if we have information on a substitution or other useful information relating to it.

A non-response to an email of phone call / voice message request for a part (we may appear to have, but typically 'highlighted in Orange or Yellow'), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale.  Also, parts requests can occasionally take time for us to respond to. While we may have a part listed, and we like to keep the website 100% accurate, occasionally a part will be 'used by us' or 'previously sold' and we by oversight, and we did not get the web listing marked "SOLD", or the part gets  'mis-placed' or 'lost' (laid down somewhere in the warehouse(s) and then it get's lost track of (that happens to our coffee cups all the time, then we find it months later with 'a good batch of 'penicillin' growing in it), so we like to 'lay eyes on it' prior to responding. Sometimes we just can't figure out which cabinet or drawer parts were assigned to (and we're working on a system for that one).

Some folks email / call and want us to respond either way / whether we have the part or not. Again, we simply do not have the time resources to do that. Our time must be utilized on the requests we can fulfill. 
Sorry for all the excuses, but that's how the 'system' (or lack thereof) works.
And, if you don't see it, we likely don't have it.
 Thank you for your understanding.

$20. MINIMUM ORDER

20% off sale on salvage speaker parts.


See sales banners on parts pages for details

Most of these components are "take-outs" from working speaker cabinets and unless otherwise noted are in perfect shape!
   Where necessary foam surrounds have been replaced and / or speaker has been professionally and correctly re-coned!
 

POLK-AUDIO MONITOR 2 SERIES 2 SPEAKER PARTS / SPARES / REPLACEMENT SPEAKERS
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
Polk Audio	Polk Audio Model Monitor 2 /  Series 2	Woofers	MW 6502 Poly coated w/ Butyl Rubber surround.	6.5"	-	8 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically. $55. ea	Great cond. Works. NOTE! We now 'proactively' add 'liquid metal' epoxy to all of our Polk 6000 series drivers to eliminate the possibility (likelihood) of 'magnet shift'.
Polk Audio	Polk Audio Model Monitor 2 /  Series 2	Tweeters	SL-1500	1" soft dome on plate	-	8- ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically. $35. ea 8/8/12	Great cond. Works.
Polk Audio	Polk Audio Model Monitor 2 /  Series 2	Crossover/Input Panels	-	2 Way	-	-	U	1	$30. ea.	Great cond. Works.
Polk Audio	Polk Audio Model Monitor 2 /  Series 2	Speaker Cabinets	Medium Oak vinyl wood grain finish	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically. $35. ea 8/8/12	Solid. Very clean.
Polk Audio	Polk Audio Model Monitor 2 /  Series 2	Grills / Screens / Front Covers / Screens / Front Covers	Black  Cloth	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically. $35. ea 8/8/12	Great cond. No breaks to frame. All locating pins intact. W/ 'Polk audio' logo.
POLK-AUDIO MONITOR 4A SPEAKER PARTS / SPARES / REPLACEMENT SPEAKERS
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
Polk Audio	Polk Audio Model Monitor 4A	Woofers (see also Monitor 2)	MW 6502 Poly coated w/ Butyl Rubber surround.	6.5"	-	8 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Great cond. Works.   Stamped Steel frame. Butyl Rubber Surround. Ceramic Magnet. Coated, Pulp cone, Cloth dust cap. Butyl Rubber Surround. NOTE! We now 'proactively' add 'liquid metal' epoxy to all of our Polk 6000 series drivers to eliminate the possibility (likelihood) of 'magnet shift'.
Polk Audio	Polk Audio Model Monitor 4A	Tweeters	5515A	1" soft dome on plate	-	4 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk Audio Model Monitor 4A	Crossover/Input Panels	-	2 Way	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Great cond. Works.
Polk Audio	Polk Audio Model Monitor 4A	Speaker Cabinets	Rosewood vinyl wood grain finish	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk Audio Model Monitor 4A	Grills / Screens / Front Covers / Screens / Front Covers	Black  Cloth	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically. $35. ea 8/8/12	Great cond. No breaks to frame. W/ 'Polk audio' logo.
POLK-AUDIO MONITOR 10 SPEAKER PARTS / SPARES / REPLACEMENT SPEAKERS
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
Polk Audio	Polk Audio Model Monitor 10 Series I	Woofers	MW 6500 MW6500 (Later replaced w/ 6503)	6.5"	-	8 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Stamped Steel frame. Butyl Rubber Surround. Ceramic Magnet. Coated, Pulp cone, Cloth dust cap. Butyl Rubber Surround. NOTE! We now 'proactively' add 'liquid metal' epoxy to all of our Polk 6000 series drivers to eliminate the possibility (likelihood) of 'magnet shift'.
Polk Audio	Polk Audio Model Monitor 10 Series I	Passive  Radiator	W/ 4.0" center dampening disc	10"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk Audio Model Monitor 10 Series I	Tweeters	-	1" soft dome on plate	-	8- ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk Audio Model Monitor 10 Series I	Crossover/Input Panels	-	2 Way	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk Audio Model Monitor 10 Series I	Speaker Cabinets	Rosewood vinyl wood grain finish	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk Audio Model Monitor 10 Series I	Grills / Screens / Front Covers	Black  Cloth	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk Audio Model Monitor 10 Series I	Grill pins / screen pins / attachment / locating pins	-	-	-	-	U	a few	$8. ea.	-
POLK AUDIO Monitor 11T Speaker Parts / Spares / Replacement Speakers. Note: Some Monitor 11T MAY fit some Polk Audio SDA-CRS-SDAII SDA II models. Check your driver model number for compatibility.
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
Polk Audio	Monitor Series 11T 11-T and some SDA-CRS, SDA-II models	Woofers	MW 6510 MW6510	6.5"	-	8 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Stamped Steel frame. Butyl Rubber Surround. Ceramic Magnet. Coated, Pulp cone.Butyl Rubber Surround. NOTE! We now 'proactively' add 'liquid metal' epoxy to all of our Polk 6000 series drivers to eliminate the possibility (likelihood) of 'magnet shift'.
Polk Audio	Monitor Series 11T 11-T and some SDA-CRS, SDA-II models	Passive  Radiator	W/ 2.75" center dampening disc	8"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Monitor Series 11T 11-T and some SDA-CRS, SDA-II models	Passive  Radiator	W/ 4.0" center dampening disc	8"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Monitor Series 11T 11-T and some SDA-CRS, SDA-II models	Tweeters	SL-2000 SL2000	1" Silver Coil, soft dome on plate	-	8- ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Monitor Series 11T 11-T	Crossover / input panel	-	2- Way	-	-	U	1	$45 ea	Black / Gnd banana jack snapped off. All else good.
Polk Audio	Monitor Series 11T 11-T	Cabinets	Black vinyl tower	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Monitor Series 11T 11-T	Grills / Screens / Front Covers	Black  Cloth	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
POLK AUDIO RTA-15TL Speaker Parts / Spares / Replacement Speakers. Polk Audio RTA (Real Time Array Series)
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
Polk Audio	Polk RTA-15TL	Woofers	MW 6503 MW6503 Butyl rubber surround (could likely sub MW6500)	6.5"	-	8 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Stamped Steel frame. Butyl Rubber Surround. Ceramic Magnet. Coated, Pulp cone, Cloth dust cap. Butyl Rubber Surround. NOTE! We now 'proactively' add 'liquid metal' epoxy to all of our Polk 6000 series drivers to eliminate the possibility (likelihood) of 'magnet shift'.
Polk Audio	Polk RTA-15TL	Front Passive  Radiator	BD1000 / SW-100 w/ 4.0" center dampening disc & Butyl rubber surround	10"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Stamped Steel frame. Butyl Rubber Surround.
Polk Audio	Polk RTA-15TL	Rear Passive  Radiator	BD1004 / SW-104 w/ 4.0" center dampening disc & Butyl rubber surround	10"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Stamped Steel frame. Butyl Rubber Surround.
Polk Audio	Polk RTA-15TL	Tweeters	SL-3000 / SL-2000 can be sub'd	1" Silver Coil, soft dome on plate	-	8- ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk RTA-15TL	Crossover / input panel	-	2- Way	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	Polk RTA-15TL	Grills / Screens / Front Covers	Black  Cloth / Thin MDF frame	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
POLK-AUDIO SDA 1A SIGNATURE SPEAKER PARTS / SPARES / REPLACEMENT SPEAKERS
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
Polk Audio	SDA 1A / SRS2	Woofers	MW 6509	6.5"	-	8 ohms	U	6-8	$20. ea. As-Is	All have some degree of magnet shift / locked / scraping voice coil-cone. Also dust caps may be pushed in, but can be pulled with shop vac.   Stamped Steel frame. Butyl Rubber Surround. Ceramic Magnet. Coated, Pulp cone, Cloth dust cap. Butyl Rubber Surround.
Polk Audio	SDA 1A	Passive  Radiator	-	12"?? or 15"??	-	-	U	2	$45. ea.	Great
Polk Audio	SDA 1A	Tweeters	SL-2000 SL2000	1" Mylar dome on plate	-	8- ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Slight creasing to Mylar come. Cosmetics only. Work and sound great.
Polk Audio	SDA 1A	Crossover	SDA  series	2/3 Way	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA 1A	Cabinets	Oak  Wood  veneer	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA 1A	Grills / Screens / Front Covers	Black  Cloth	48" x 20 5/8"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically. w/ original knit cloth. (Note: due to their size, packing and shipping will be VERY expensive, relatively speaking and will need custom boxes which adds about a week.)	Frames solid and intact. Cloth great cond and snag free. 'Stereo Dimensional Array / Matthew S. Polk' Signature Logos intact.
Polk Audio	SDA 1A	Grills / Screens / Front Covers	Black  Cloth	48" x 20 5/8"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically. w/ original knit cloth.  Recovered w/ fresh knit grill cloth $185. ea. (Note: due to their size, packing and shipping will be VERY expensive, relatively speaking and will need custom boxes which adds about a week.)	Frames solid and intact. Cloth great with only minor snags. 'Stereo Dimensional Array / Matthew S. Polk' Signature Logos intact.
POLK-AUDIO SDA / CRS SPEAKER PARTS / SPARES / REPLACEMENT SPEAKERS
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
Polk Audio	SDA / CRS	Woofers	MW 6510	6.5"	-	8 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	Stamped Steel frame. Butyl Rubber Surround. Ceramic Magnet. Coated, Pulp cone, Cloth dust cap. Butyl Rubber Surround. NOTE! We now 'proactively' add 'liquid metal' epoxy to all of our Polk 6000 series drivers to eliminate the possibility (likelihood) of 'magnet shift'.
Polk Audio	SDA / CRS	Woofers	MW 6511	6.5"	-	4 ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA / CRS	Passive  Radiator	-	-	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA / CRS	Tweeters	SL-2000 SL2000	1" Mylar dome on plate	-	8- ohms	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA / CRS	Crossover	SDA  series	2/3 Way	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA / CRS	Cabinets	Oak  Wood  veneer	20" w x 12.75" h x 9.5"	2/3 way	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA / CRS	Grills / Screens / Front Covers	Black  Cloth	19.75" x 12"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
Polk Audio	SDA / CRS	Rear Grill	Black  Metal	9.5"	-	-	U	0	Reference information only. None currently for sale, but more MAY occasionally show up. Check back periodically.	-
BRAND   OF   SPEAKER	MODEL   OF  SPEAKER	ITEM	PART #	SIZE	WATTS	OHMS	USED   /   NEW	QUANTITY	PRICE	NOTES
-	-	-	-	-	-	-	-	-	-	-
---If you're looking for a great place for great place to purchase new foam surround kits, replacement surrounds, or to have your woofers, sub woofers / subs, re-foamed or re-coned, we recommend either 'Orange County Speakers' or 'Parts Express'. They have QUALITY parts and do QUALITY work.

CONTACT INFO BELOW

$20. MINIMUM ORDER

 

                                             

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with *only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)
*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

    Before calling, PLEASE read the text in below.      
 BEFORE CALLING
(800) 806-4231 EXT #1
~10:00 AM- ~5:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE

OR

BEFORE EMAILING
 parts@oaktreevintage.com
>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with *only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)
*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

We DO NOT have your part unless the following conditions are met:

A) You HAVE SEARCHED our page(s) and HAVE FOUND the part you are looking for SPECIFICALLY listed on one of our pages or you have solid information that it's a 'bona fide' substitution for your part (unless noted already, we won't have any further info along those lines)
AND
B) The part that you have found is NOT marked as SOLD or SOLD OUT.

If you do NOT see it listed after thoroughly searching the pertinent page (likely the page you landed on originally),  
we do not have it,   
nor do we know when it might come in,   
nor do we maintain "waiting lists" for parts,    
nor do we know who might have it.

Sorry, but phone and email traffic for parts we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.

 We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!

ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms may automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings".
We do not return calls / emails for requests for parts we don't show / or have available (we may choose contact with further, useful information).

 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |  KEYBOARD PARTS 
___________________________________________

Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.

Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.

 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |   SELLING-TRADING-CONSIGNING   |  KEYBOARD PARTS   I   FAQ'S  
  CONDITION RATINGS   |   ORDERING / POLICIES    |    WARRANTIES / RETURNS   |   SHIPPING     
 RESTORATION PROCEDURES   |   REPAIRS  | CONTACT PARTS


As much of the price charged for parts is for the 'time to extract' from it's donor unit, unless we send the 'wrong part', parts are NOT returnable.
See our "Warranties / Returns" page via the link below for more details.

POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
 

Copyright © 1997-2023 Oak Tree Enterprises, LLC

COPYRIGHT INFORMATION