PHOTO GALLERY OF VINTAGE / USED
TECHNICS STEREO TURNTABLES
- REFERENCE PHOTOS / ARCHIVE SOLD UNITS -
 

Archive / Reference / Photo Gallery of Vintage Technics Stereo Turntables that we have had in the past. Vintage 1970's and 80's models of Technics Turntable models such as, Technics SL-5, SL-20, SL-23, SL-220, SL-230, SL-235, SL-1400, SL-1500, SL-1600MK2, SL-1950 Stacker / Changer, SL-3300, SL-3350 Stacker / Changer, SL-B2, SL-B5 Stacker / Changer, SL-B35, S;-B101, SL-B200, SL-B202, SL-B210, SL-B300, SL-B350, SL-B500, SL-BD35, SL-D2, SL-D3, SL-D22, SL-D202, SL-D303, SL-DL1, SL-DL5, SL-J2, SL-Q2, SL-Q3, SL-Q5, SL-Q30, SL-Q202, SL-Q300, SL-QD33, SL-QL5, SL-QX300. Keep checking this page and our 'current turntables' page as we commonly have more Technics Turntables coming. All photos and text, copyrighted and protected as stated at bottom of page. Click the link below for current inventory.

  



VINTAGE TECHNICS LINEAR TRACKING TURNTABLE
TECHNICS SL5
HOLD FOR SHOP USE

 

       NEW LISTING 4/16/08
(Click on above thumbnails to enlarge photos)
warranty
VINTAGE TECHNICS LINEAR TRACKING TURNTABLE
 MODEL TECHNICS SL-5 / SL5
#...H041
LINEAR TRACKING
 FULLY-AUTOMATIC
 MADE IN JAPAN
 Circa 1982-83
SOLD 7/31/08

 

 

     

NEW LISTING 8/21/12
 (Click on above thumbnails to enlarge photos)
  warranty
 VINTAGE TECHNICS LINEAR TRACKING TURNTABLE RESTORED / REFURBISHED
      MODEL TECHNICS SL-5 SL5
 #...H026

 
 LINEAR TRACKING
  FULLY-AUTOMATIC
  MADE IN JAPAN
  Circa 1982-83
SOLD 10/1/12
SHIPPED TO PENNSYLVANIA

    

NEW LISTING 10/13/10
 (Click on above thumbnails to enlarge photos)
warranty
  VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
       TECHNICS SL-20SL20
  #...D260
BELT DRIVE
FULLY MANUAL
Made in Japan
Circa 1977-78 
SOLD 11/13/10

w/ new AT-301 Elliptical Diamond stylus cartridge installed 

   

 NEW LISTING 5/9/12
 (Click on above thumbnails to enlarge photos)
 warranty
 VINTAGE TECHNICS STEREO TURNTABLE
TECHNICS SL-1500 / AKA SL-150
 #...E488 
 DIRECT DRIVE
  FULLY MANUAL
SEMI-PRO
  Made in Japan
  Circa 1976-80 
SOLD 5/17/12
  We have just had the table completely gone through by our turntable tech, cleaning inside and out, lubricating mechanism, adjusting tone arm and testing performance. Internal speed centering pots cleaned with 'De-Ox-Id' and adjusted back to 'center'. External (user) speed adjustment controls then cleaned with 'De-Ox-Id'. Speed checked and verified for accuracy with test strobe disc against built-in strobe monitor. Spindle bearing disassembled, varnished lube removed, cleaned and properly re-lubed. Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Original dust cover just had fresh buff, and looks decent with a few minor "battle scars" (see photos above). Hinge area solid with both original hinges intact and hold dust cover in 'up-right' position with no sagging. Original rubber mat, still supple and flexible with no hardening. RCA patch cables re-soldered to circuit board. Also, Technics SL-1500's came with some fairly 'anemic' feet installed from the factory. We removed what was left of those and replaced them with a set of our new, Sorbothane Iso Pods.
We installed, a brand new Audio-Technica AT-95E "Green" Elliptical diamond stylus, magnetic cartridge and optimized the tone arm for it. (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
  

   TECHNICS SL-1500 Features:

 
  
  TECHNICS SL-1500 TABLE SPECIFICATIONS:
  
  Motor and Turntable Drive System: ....
  Platter: .....
  Speeds: 33 1/3 and 45 rpm
  Tone arm Type: .....
  Overhang: XXXXmm
   Cartridge Weight range: ...

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 
 .....Again, this table has been completely gone through by our turntable technician.......

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?
 

 Includes our standard 30 day limited warranty.
  TECHNICS SL-1500 SL1500 / SL-150 / SL150 Turntable
  Cond. 8.5
 W/ DUST COVER
SOLD 5/17/12
&
W/ SET OF NEW SORBOTHANE® ISO PODS AND NEW AUDIO TECHNICA CARTRIDGE INSTALLED




To connect to computer for burning CD's or to a modern A/V receiver that does not have phono inputs, just order one of our inexpensive $29.99 Phono Pre-Amps and cable kits.

 

 

    

    

NEW LISTING 10/3/1908
 (Click on above thumbnails to enlarge photos)
  warranty
COMPLETELY SERVICED / REFURBISHED
CLASSIC AND BEAUTIFUL TECHNICS TURNTABLE
TECHNICS SL-1700-MKII
 STEREO TURNTABLE
 DIRECT DRIVE
 SEMI-AUTOMATIC (AUTO-RETURN-SHUT-OFF)
with
CARTRIDGE
#...A106
 Made in Japan
 Circa 1978-80
SOLD 10/16/19
SHIPPING TO LYN IN CALIFORNIA
ü Our technician has completely gone through and 'Certified' this unit .
 
 ü Tested / analyzed and passed for motor noise and 60Hz hum.

ü Internal / 'Circuit Board mounted' adjustable platter speed potentiometers cleaned and CENTERED for 'ZERO'd' 'User pots'

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Tone arm, 'Lead In / Out' adjusted and tested.

ü Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Stop mechanism adjusted and tested.
 
ü Rubber mat still supple and flexible with no hardening.
 
ü Platter speed checked and verified for 100% accuracy with our factory test strobe disc following above restoration.
 
ü Platter tested for 'true flat' and no 'run-out'

ü Matt finish, vinyl installed across existing front panel blemishes

ü Upgraded, Heavy duty, shielded RCA interconnects installed w/ Gold plated plugs to replace the stock cables.

ü Stanton, RS-500DJ cartridge installed and tone arm adjustments optimized for it.

ü Tone Arm weighting and ‘skating’ adjusted for proper tracking with test tone record and O-Scope (although after shipment, you'll need to simply re-weight it, but the point is, that both adjustments correlate with each other well).

ü Original dustcover had an 'ALL SIDES'buff, and while still retains a few of the deeper 'battle scars', it looks acceptable (see photos above). Hinges adjusted to hold it upright as well. (note; this is an incredibly well designed and built dust cover, and is of acrylic about 3 times the thickness of most covers).

ü Cartridge / head shell ‘overhang’ / alignment adjusted using shop 'Stevens' calibration scale.
 
ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record
 
ü Unit test cycled through 12+ LP’s flawlessly

You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to a 'modern AV receiver' that doesn't have a pre-amp built-in, or computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

  
Again, we have completely gone through the table, testing for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm function and internal mechanism operation. Table now functions perfectly and looks great! Measures 18" wide x 16" deep x 6" tall and weighs 22 lbs unpacked. Comes with our standard 30 day limited warranty.
TECHNICS SL-1700MK2
Cond. 8.5
SOLD 10/16/19
SHIPPING TO LYN IN CALIFORNIA
(Cons. R.R.)
W/ Dust Cover & Stanton Diamond stylus cartridge installed

 
(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)
 

   

   

 

NEW LISTING 12/22/14
(Click on above thumbnails to enlarge photos)
  warranty
RESTORED / REFURBISHED  
STEREO TURNTABLE MCS 6700 (Technics SL-1950)
  FULLY-AUTOMATIC / *STACKER / *CHANGER TURNTABLE
  DIRECT DRIVE
   MADE IN JAPAN
   Circa 1977-78
SOLD 1/11/15
SHIPPED TO COLORADO
  ü  Our technician has completely gone through and 'Certified' this unit . Entire table's auto-start / stop / changer mechanism was COMPLETELY disassembled, including 'Main Gear' assembly, 'Actuating Plate' assembly, 'Stop Plate' assembly & 'Tone-Arm Actuator' assembly, every part cleaned of old, gummy lube, re-lubed and reassembled (huge undertaking, by the way).

ü  Tone-arm ‘Cueing’ mechanism disassembled, cleaned and re-filled with fresh 500,000 silicone fluid.

ü  Tone-arm height adjusted

ü  Tone-arm 'lift height' adjusted.

ü  Fresh 500,000 silicone damping in the cuing mechanism and cuing speed adjusted.

ü  Tone-arm ‘Auto’ functions restored, adjusted and tested

ü  Tone-arm lead ‘In / Out’ adjusted

ü  Internal speed centering pots cleaned with 'De-Ox-Id' and adjusted back to 'center'.

ü  External (user) speed adjustment controls then cleaned with 'De-Ox-Id'.

ü  Speed checked and verified for accuracy following tear down / service / re-assembly with our factory test strobe disc.

ü  Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy.

 ü  Entire table was cleaned inside and out

ü  Speed checked and verified for accuracy with our shop strobe disc.

ü Tested / analyzed and passed for motor noise and 60Hz hum

ü  Rubber mat, still supple and flexible with no hardening.

ü Original feet in perfect condition

ü Unit test cycled through 6 LP’s flawlessly

ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record

We installed a fresh / new, Audio-Technica AT-92, Elliptical diamond stylus, magnetic cartridge and optimized the tone arm for it. (This table does have a 1/2", "universal" mount head shell, so any standard, 1/2" mount cartridge will fit it.) (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

ü Original included, but we did not address it's cosmetics. Could be much improved, but that would add considerably to the tables cost. It is perfectly functional. Hinges hold it upright as well
  
Fully Auto, MCS-6700 (Technics SL-1950) Direct Drive Stereo Turntable. Good solid performer. With the exception of the 'un-addressed' dust cover, the balance of the table looks great and works fine.

MCS 6700 Features include:
   
...text omitted / archived

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


    
MCS 6700 TABLE SPECIFICATIONS:
  
...text omitted / archived

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


 
Included Audio-Technica AT-92ECD Cartridge Specs are as follows:
 
Frequency Response: xxkHz
Output: xx mV @ 1kHz
Recommended Vertical Tracking Force: xxgrams
Recommended loading impedance: xxK ohms (standard, requires only standard phono pre-amp built-into most gear)

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?
.
 
Again, this MCS 6700, DD, Fully-Auto, (Stacker / Changer with the correct spindle) turntable has been completely gone through. It looks and works great and is ready to go! Includes an e-copy of the owners manual.  Measures 17" wide x 14.75" deep x 6.5" tall and weighs 16 lbs unpacked. Includes our standard 30 day limited warranty.
MCS 6700 (Technics SL-1950)
Cond. 8.5 (not counting dust cover)
(C) R.R.
SOLD 1/11/15
SHIPPED TO COLORADO
w/'UGLY' but, 'FUNCTIONAL' dust cover
 & NEW AUDIO TECHNICA CARTRIDGE INSTALLED



 

    

NEW ADDITION 4/16/12
 (Click on above thumbnails to enlarge photos)
  warranty
STEREO TURNTABLE TECHNICS SL-3300
FULLY-AUTOMATIC DIRECT DRIVE TURNTABLE
  MADE IN JAPAN
  Circa 1980-81
SOLD 4/21/12
 We have just had the table completely gone through. Entire table's auto-start / stop mechanism was COMPLETELY disassembled, every part cleaned of old, gummy lube, re-lubed and reassembled (huge undertaking, by the way). Internal speed centering pots cleaned with 'De-Ox-Id' and adjusted back to 'center'. External (user) speed adjustment controls then cleaned with 'De-Ox-Id'. Speed checked and verified for accuracy following tear down / service / re-assembly with our factory test strobe disc. Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Cuing mechanism disassembled, cleaned and re-lubed w/ fresh 500,000 grade silicone damping fluid. All functions work great! Rubber mat, still supple and flexible with no hardening. All original 'shock absorbing' feet intact. Dust cover looks great with only very minor wear. No cracks, splits, chips or deep gouges. Hinge tab in original 'unbroken' condition. Original Technics' dust cover hinges hold dust cover up well.
We installed, a brand new Audio-Technica, AT-95E / 'Green', Elliptical diamond stylus, magnetic cartridge and optimized the tone arm for it. (This table does have a 1/2", "universal" mount head shell, so any standard, 1/2" mount cartridge will fit it.) (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
 
  Turntable SL-3300 Features include:
   .......

Turntable SL-3300 TABLE SPECIFICATIONS:
 
 Motor and Turntable Drive System: .......
 Platter: ......
 Speeds: 33 1/3 and 45 rpm
 Tone arm Type: ....
Wow and Flutter: .....
Rumble:-.....

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


Effective Arm Length; .....
Overhang; ....
Effective Mass; ....
Offset angle; .....
Tracking Error: ......
Tracking range: ......
Useable Gross Cartridge Weight range: .....
Useable Gross Cartridge Weight range w/ head shell: .....
Cartridge type: .......

Included Cartridge Specs are as follows:

Cartridge Design: .....
Stylus Type: ......
Frequency Response: ....
Output voltage: ......
Channel Separation: .....

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


Channel Balance: .....
Recommended Vertical Tracking Force: XX
Recommended loading impedance: XXK ohms (standard, requires only standard phono pre-amp built-into most gear).

....Again, this Technics SL-3300, DD, Fully-Auto turntable has been completely gone through....

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 Includes our standard 30 day limited warranty.
Technics Fully Automatic, Direct-Drive Turntable SL-3300
$XXX
w/dust cover
SOLD 4/21/12
&
w/ NEW Audio-Technica 'AT-95e' Elliptical Diamond stylus cartridge installed
 

NEW LISTING 7/14/05

VINTAGE TECHNICS STACKER / CHANGER TURNTABLE
TECHNICS SL-3350

SOLD 8/31/05
 

     

         NEW LISTING 12/20/14
(Click on above thumbnails to enlarge photos)
  warranty
RESTORED / REFURBISHED
VINTAGE TECHNICS TURNTABLE
TECHNICS SL-B35 / SLB35
FULLY AUTOMATIC / BELT DRIVE
TURNTABLE
#...B134
Made in Japan
Circa early 1980’s
SOLD 12/16/15
SHIPPING TO MASSACHUSETTS
ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning and re-lubricating mechanism, adjusting tone arm height, lead OUT and 'auto return' mechanism and testing performance.

ü Internal speed pots, adjusted for centering and speed checked and verified for accuracy with our factory test strobe disc against built-in strobe monitor.

ü Fresh belt installed.

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy.

ü 'Auto' mechanism adjusted and tested.

ü Original rubber mat, still supple and flexible with no hardening.

ü Original feet in fine condition.

ü We also re-installed and adjusted the existing, Stanton ‘D71E’, elliptically cut Diamond, magnetic cartridge and optimized the tone arm for it. (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

ü Original dustcover had a fresh buff, and looks fine. Hinges hold it upright as well.

ü Tested / analyzed and passed for motor noise and 60Hz hum.

ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record

ü Unit test cycled through 6 LP’s flawlessly.

Great performing Technics SL-B35, Belt Drive, Fully Automatic turntable. Following the above restoration, it functions correctly and performs well.

Technics SL-B35 Turntable Features:
 
...TEXT OMITTED / ARCHIVED

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


 
Again, our turntable tech has completely gone through it testing for speed accuracy, rumble, wow & flutter, noise isolation, tone-arm function and lubed internal mechanism. Also installed a new belt for years of trouble-free service. Original dust cover is in fabulous shape after a fresh plastic buff / hand polish. Table looks good and works great! Comes with a great performing, Stanton D71E, Elliptically cut, diamond stylus cartridge. Ready to play!!! (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) Measures 17" wide x 14.5" deep x 4.5" tall and weighs 9 lbs unpacked. Comes with our standard 30 day limited warranty.
RESTORED / REFURBISHED TECHNICS SL-B35 STEREO TURNTABLE
Cond. 8.5
SOLD 12/16/15
SHIPPING TO MASSACHUSETTS
(C) R.R.

W/ DUST COVER
&
'Stanton' Elliptical Diamond stylus cartridge installed

 

          

NEW LISTING 12/20/2020
(Click on above thumbnails to enlarge photos)
  warranty
FULLY SERVICED / REFURBISHED
VINTAGE TECHNICS TURNTABLE
TECHNICS SL-B35 / SLB35
FULLY AUTOMATIC / BELT DRIVE
TURNTABLE
#...B122
Made in Japan
Circa early 1980’s
SOLD 3/27/2021
SHIPPED TO TRAVIS IN WASHINGTON

ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, removing 35+ year old 'stiff' grease that almost always impedes mechanism movement, cleaning and re-lubricating mechanism, adjusting tone arm height, lead OUT and 'auto return' mechanism and testing performance.

ü Internal speed pots, cleaned as initial 'speed adjustment' would not stabilize. Following cleaning, then adjusted for centering and speed checked and verified for accuracy with our factory test strobe disc against built-in strobe monitor.

ü New / Fresh belt installed.

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy.

ü 'Auto' mechanism adjusted and tested.

ü Original rubber mat, still supple and flexible with no hardening.

ü New 'Ground' wire installed w/ 'Spade' lug

ü New RCA patch cables included

ü Original feet in fine condition.

ü We also re-installed and adjusted the existing, Shure ‘LTP-2’, elliptically cut Diamond, magnetic cartridge and optimized the tone arm for it. (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

ü Original dustcover had a moderate buff, and while still has some scuffing, it looks presentable. Original 'hinge tabs' do have some broken sections, but are still functional. Hinges hold it upright as well.

ü Tested / analyzed and passed for motor noise and 60Hz hum.

ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record

ü Unit test cycled through 6 LP’s flawlessly.

Great performing Technics SL-B35, Belt Drive, Fully Automatic turntable. Following the above restoration, we tested automatic functions through 10 LP sides, and it functions correctly, performs well and sounds great. Cosmetically the table looks great. The original dust cover is included, but is not 'issue free'. It was fairly 'scuffed on the top when it arrived, but did get some moderate buffing which 'helped' it look much better and is now 'presentable'. The original plastic tabs do have some 'chips / sections' missing, but do still function. The original hinges are in good shape and do allow the dust cover to be held in it's 'UP' position.

Technics SL-B35 Turntable Features:
 
...TEXT OMITTED / ARCHIVED

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 
Shure LTP-2 Phono Cartridge Specifications:

The Shure LTP-2 phono cartridge offers P-mount T4P convenience, high performance and musical accuracy. It is a quality P-mount cartridge.
Output voltage @ 1kHz, 5cm/sec: 4mV
Channel balance: within 2dB
Channel separation (minimum): 20dB @ 1000Hz
Frequency response: 20Hz-20kHz
Stylus type: 0.0004 x 0.0007 inch elliptical
Stylus construction: Bonded
DC Resistance: 1550 Ohms
Cantilever construction: Alloy tube
Tracking force range: 1.25 - 1.5 g
Recommended load resistance: 47k ohms

Again, our turntable tech has completely gone through it testing for speed accuracy, rumble, wow & flutter, noise isolation, tone-arm 'Auto' functions and lubed internal mechanism. Also installed a new belt for trouble-free service. Original dust cover is in good shape as mentioned above after a fresh plastic buff / hand polish. Table looks good and works great! Comes with a great performing, Shure LTP-2, Elliptically cut, diamond stylus cartridge. Ready to play!!! Measures 17" wide x 14.5" deep x 4.5" tall and weighs 9 lbs unpacked. Comes with our standard 90 day limited warranty.
RESTORED / REFURBISHED TECHNICS SL-B35 STEREO TURNTABLE
Cond. 8.5
SOLD 3/27/2021
SHIPPED TO TRAVIS IN WASHINGTON

W/ DUST COVER
&
'SHURE LTP-2' Elliptical Diamond stylus cartridge installed

(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)

 

    

    

NEW LISTING 7/2/15
(Click on above thumbnails to enlarge photos)
  warranty
RESTORED / REFURBISHED
PRE-OWNED TECHNICS STEREO TURNTABLE REFURBISHED
TECHNICS SL-BD10
FULLY MANUAL
BELT DRIVE
 #...A543
 Circa 1986
MIJ
SOLD 11/13/17
SHIPPING TO MICHIGAN
Our technician has completely gone through and 'Certified' this unit  cleaning inside and out, lubricating mechanism, adjusting tone arm and testing performance. Speed checked and verified for accuracy with both internal strobe and the shop calibrated strobe disc. Super quality Gimbal tone-arm bearing. Tracks grooves well. Original dust cover just had fresh buff, and looks decent, with only minor scuffing (see photos above). Original hinges and hinge tabs in fine and functioning condition and holds dust cover in the 'up' position fairly well. No cracks, chips, or hairlines. All four original 'shock absorber' feet intact. Original rubber platter mat, lays perfectly flat with no blistering, bubbles or warps. We also inspected and re-installed existing Pickering DLE, elliptically cut diamond stylus, on the, P-mount head shell.  (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
 ____________________________________
  
Decent quality and easy to use. Great if you 'just want to play records' and are fine with 'fully manual' operation.
  Technics SL-BD10 features: 

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

  
...

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 
 Again, our turntable tech has completely and EXTENSIVELY gone through this Technics SL-BD10 turntable as stated above and 'certified' it's ready to go! Then tested for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm bearing function. Table functions perfectly and looks near fine! Measures 17" wide x 14" deep x 4" tall and weighs 7 lbs. Comes with our standard 30 day limited warranty.
TECHNICS SL-BD10 STEREO TURNTABLE
  Cond. 8.5
w/ dust cover
(C) R.R.
SOLD 11/13/17
SHIPPING TO MICHIGAN

 w/ Pickering DLE, Elliptical Diamond stylus cartridge installed

To connect to computer for burning CD's or to a modern A/V receiver that does not have phono inputs, just order one of our inexpensive $42.99 Phono Pre-Amps and cable kits.

(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)
 

 

  

 

 

  

TECHNICS SL-BD35
SOLD

 

NEW LISTING 5/20/09
 (Click on above thumbnails to enlarge photos)
warranty
   TECHNICS
 STEREO TURNTABLE
   TECHNICS SL-D3 / SLD3
   FULLY-AUTOMATIC
   DIRECT DRIVE
   MADE IN JAPAN
   Circa 1979-80
SOLD 7/23/09
 & w/ new AT Elliptical Diamond stylus cartridge installed
 

           NEW LISTING 12/27/10
(Click on above thumbnails to enlarge photos)
warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
     TECHNICS SL-DL1 sldl1
 FULLY-AUTOMATIC
 DIRECT DRIVE
LINEAR TRACKING
#...0083
 MADE IN JAPAN
 Circa 1980-83
SOLD 2/4/11

TECHNICS SL-J2
SOLD

 

    

NEW LISTING 4/26/05
TECHNICS SL-J2
STEREO TURNTABLE
SOLD 4/26/05

 

 

    

         NEW LISTING 5/12/16
(Click on above thumbnails to enlarge photos)
  warranty
RESTORED / REFURBISHED
VINTAGE TECHNICS LINEAR TRACKING TURNTABLE
TECHNICS SL-J2 LINEAR TURNTABLE
Circa 1984-86
MIJ
SOLD 1/3/18
SHIPPING TO TENNESSEE
ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning out ‘gelled’ lubes (a ‘MUST DO’ on all pre-owned / vintage turntables) and re-lubricating mechanism, including entire 'carriage mechanism'. Arm mechanism belt replaced with new #045. Speed tested to >99% accuracy. Dust cover had 2-Stage buffing. Hinge system intact and holds lid in upright position.

Again, our turntable tech has completely and EXTENSIVELY gone through this Technics SL-J2 turntable as stated above and 'certified' it's ready to go! Table looks great with fresh "buff" to dust cover. Very clean! This is very similar to one of the tables I use personally. Utilizes "P" mount cartridge. Comes with Audio-Technica / Realistic RX-1500 cartridge / stylus. If you prefer an up-grade you may also select from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost. Everything works great! Includes an 'e' copy / pdf download of the Technics SL-J2 owners / users / instruction manual. Measures 12 1/2" wide x 12 1/2" deep x 3.5" tall (closed) and weighs 9 lbs unpacked. Includes our standard 30 day limited warranty.
TECHNICS SL-J2 LINEAR TRACKING TURNTABLE
 Cond. 9
SOLD 1/3/18
SHIPPING TO TENNESSEE

(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)

 

  

 

   

NEW LISTING 4/11/09
(Click on above thumbnails to enlarge photos)
warranty
 TECHNICS
 STEREO TURNTABLE
 TECHNICS SL-Q2 / SLQ2
 SEMI-AUTOMATIC
 DIRECT DRIVE
 QUARTZ LOCK
#...A397
 Circa 1979-81
SOLD 5/11/08
w/ NEW AT-71E  Elliptical Diamond stylus cartridge installed
 

 

    

    

NEW LISTING 12/20/14
(Click on above thumbnails to enlarge photos)
  - warranty
RESTORED / REFURBISHED
VINTAGE TECHNICS TURNTABLE
TECHNICS SL-Q2 / SLQ2
FULLY AUTO
DIRECT DRIVE
STEREO TURNTABLE
RESTORED / REFURBISHED
#...A323
Made in Japan
Circa 1979-81-
SOLD 12/24/14
ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning and re-lubricating mechanism, adjusting tone arm height, lead OUT and 'auto return' mechanism and testing performance.

ü Internal speed pots, adjusted for centering and speed checked and verified for accuracy with our factory test strobe disc against built-in strobe monitor.

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Tone-arm / head-shell ‘Overhang’ adjusted using shop chart

ü Gimbol bearing, counter weight and anti-skating all adjusted and verified for accuracy. 'Auto' mechanism adjusted and tested.

ü Original rubber mat, still supple and flexible with no hardening.

ü Original feet in fine condition.

ü We also installed and adjusted a fresh, new, Audio-Technica ‘AT-92ECD’, elliptically cut Diamond, magnetic cartridge and optimized the tone arm for it.- (If you prefer an up-grade you may also choose from our selection of new Audio-Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. -

ü  Tested / analyzed and passed for motor noise and 60Hz hum

ü Unit test cycled through 6 LP’s flawlessly

ü  Unit tested with our myriad of test records, one of which included: Shures' 'Cartridge Obstacle Course' record

Great performing Technics SL-Q2, Direct Drive, Semi-Automatic turntable. Following the above restoration, it functions correctly and performs well.

Technics SL-Q2 Turntable Features:

...text omitted / archived

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?



TECHNICS SL-Q2 TURNTABLE TABLE SPECIFICATIONS:

...text omitted / archived

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?



- Included Audio-Technica AT-92ECD Cartridge Specs are as follows:
- 
Frequency Response: xxkHz
Output: xxmV @ 1kHz
Recommended Vertical Tracking Force: xxgrams

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


Recommended loading impedance: xxK ohms (standard, requires only standard phono pre-amp built-into most gear).

Again, this table has been completely gone through by our turntable tech- testing for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm function and lubed internal mechanism. Works and sounds great. As long as you do not need a dust cover, it looks great and is ready to go! You will not be disappointed in this table for all around use. Will include an ‘e’ copy / pdf download of the Technics SL-Q2 Owners / users manual. Measures 17" wide x 14.75" deep x 4" tall and weighs 10 lbs unpacked. Includes our standard 30 day limited warranty.
TECHNICS SL-Q2 STEREO TURNTABLE
Cond. 8.5- (due to missing dustcover)
SOLD 12/24/14
W/ AUDIO-TECHNICA ‘92ECD’ / ELLIPTICALLY CUT DIAMOND CARTRIDGE INSTALLED

 

    



            NEW LISTING 5/08/10
 (Click on above thumbnails to enlarge photos)
warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
   TECHNICS SL-Q3 SLQ3
FULLY AUTOMATIC
DIRECT DRIVE
QUARTZ LOCK
#...E042
Circa 1979-81
   "WORLD AC POWER" ™
MIJ
  SOLD 11/29/10

w/ Shure Elliptical Diamond stylus cartridge installed
 

     

           NEW LISTING 8/21/12
  (Click on above thumbnails to enlarge photos)
  warranty
 VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
           TECHNICS SL-QD33 SLQD33
 FULLY AUTOMATIC
 DIRECT DRIVE
 QUARTZ LOCK
 #...B148
 Circa 1986
MIJ
SOLD 9/6/12
SHIPPED TO VERMONT
  We have just completely gone through the turntable cleaning inside and out, lubricating mechanism, adjusting tone arm and testing performance. Speed checked and verified for accuracy with both internal strobe and the shop calibrated strobe disc. Super quality Gimbal tone-arm bearing. Stop mechanism adjusted and tested. All functions work great! Original dust cover just had fresh buff, and looks very good, with only light scuffing! Original hinges and hinge tabs in fine and functioning condition and holds dust cover in the 'up' position well. No cracks, chips, or hairlines. All four original 'shock absorber' feet intact. Original rubber platter mat, lays perfectly flat with no blistering, bubbles or warps. We also inspected and re-installed existing Audio-Technica DC-20, elliptically cut diamond stylus, on the, P-mount head shell.  (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
 ____________________________________
  
  Great quality and easy to use. What more could you ask for?! The Technics SL-QD33. Designed utilizing a Quartz locked motor for constant platter rotation speed and good isolation characteristics. Very quality build and like most Technics turntables, it's 'built like a tank'.
  Also features: 
  
...TEXT OMITTED / ARCHIVED

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?
  
TECHNICS SL-QD33 SPECIFICATIONS:
  
...TEXT OMITTED / ARCHIVED

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


 
  Again, we have had the table completely gone through, testing for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm function and lubed internal mechanism. Table functions perfectly and looks near fine! Measures 17" wide x 14.5" deep x 5.5" tall and weighs 10 lbs. Comes with our standard 30 day limited warranty.
  TECHNICS SL-QD33 STEREO TURNTABLE
  Cond. 8.5
  $239. w/ dust cover
SOLD 9/6/12
SHIPPED TO VERMONT
 
 w/ Audio-Technica D20 Elliptical Diamond stylus cartridge installed

 

 

 

   

 



VINTAGE TECHNICS LINEAR TRACKING TURNTABLE RESTORED / REFURBISHED
TECHNICS SL-QL5
SOLD 6/16/04
 

 

  

VINTAGE TECHNICS TURNTABLE
TECHNICS SL-QX300
DIRECT DRIVE / QUARTZ LOCKED
P-MOUNT CARTRIDGE

SOLD