TEAC A-4010S PARTS / SPARES
OPEN REEL DECK
TEAC A-4010S REPLACEMENT PARTS / SPARES

*Note about parts / spares sales

* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.

Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.

Parts, general condition / circuit board condition; Most of our parts are from 'salvage / donor' units. While we don't sell parts that are 'known' to be bad, occasionally parts will need further adjustment, cleaning, 'tweaking', or in the case of circuit boards, may need old, conductive glue / epoxy further cleaned, and some 'common' parts / components such as, aging / leaky capacitors, parts whose values have drifted, and some epoxy transistors may need to be replaced due to 'green / black / furry' legs, or because those parts were marked as 'sold separately'. Some circuit boards may have 'tired' "landing / solder pads", or severed traces, or cold / bad solder joints which can require solder re-flow or 'jumpers'. Unless noted, circuit boards will be 'crack / split / break' free.

Parts pricing; Most of our parts price / value will be based on a few things. Firstly, we are in the restoration / refurb business, so we consider what we would be willing to pay for the part if we needed it (which again, is what the parts are listed for in the first place, "our units"). Secondly, the rarity / value of the unit the part(s) fit. The 'Tuning Knob' for a receiver that has a final value of $350 will likely be much less than the "Tuning Knob" for a unit with a final value of $1500 or more (a set of tires for a typical sedan will be $400 to $600. A set for a Lamborghini can be $16,000). Thirdly, the 'rarity' of the part. Forth, the 'condition' of the part. Fifth, the difficulty to extract the part, or success rate for extracting certain parts. Sixth; frankly it's a LOT of work and time to part out a unit. Most take 1 to 3 days of shop time to process. Not only the disassembly, but the 4-15 hours of pre-testing / servicing and just as time consuming can be the amount of time it takes to do all of the research we do and the info we list on many parts for cross-referrencing to other units that my use the same parts by scouring service manuals. On many circuit boards we will list every 'semi-conductor' which is also very time consuming. Lastly, every call or email for a part can require 20 minutes to sometimes over an hour of 'phone support', often (about 70% of the time) with me convincing the potential purchaser that they don't need the part I have to solve their problem.
Sorry to sound like a "whiner" about selling parts, but "time is money".

Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' and most are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are commonly 'disproportionate' to their cost, typically nearly equal to and sometimes greater than the cost of the part.  Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight so are commonly just as expensive as shipping a 'complete unit'. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive).  It is what it is....

A non-response to an email of phone call / voice message request for a part that we don't show on one or our pages, or is already marked "SOLD" will be typical. We simply don't have the time / man-power resources to respond to every query we get for items we don't show as avail. Most folks get that. Having said that, I / we may respond if we have information on a substitution or other useful information relating to it.

A non-response to an email of phone call / voice message request for a part (we may appear to have, but typically 'highlighted in Orange or Yellow'), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale.  Also, parts requests can occasionally take time for us to respond to. While we may have a part listed, and we like to keep the website 100% accurate, occasionally a part will be 'used by us' or 'previously sold' and we by oversight, and we did not get the web listing marked "SOLD", or the part gets  'mis-placed' or 'lost' (laid down somewhere in the warehouse(s) and then it get's lost track of (that happens to our coffee cups all the time, then we find it months later with 'a good batch of 'penicillin' growing in it), so we like to 'lay eyes on it' prior to responding. Sometimes we just can't figure out which cabinet or drawer parts were assigned to (and we're working on a system for that one).

Some folks email / call and want us to respond either way / whether we have the part or not. Again, we simply do not have the time resources to do that. Our time must be utilized on the requests we can fulfill. 
Sorry for all the excuses, but that's how the 'system' (or lack thereof) works.
And, if you don't see it, we likely don't have it.
 Thank you for your understanding.

$20. MINIMUM ORDER

20% off sale on salvage stereo parts.


See sales banners on parts pages for details

Most of these components are "take-outs" from stereo gear that for various reasons we 'chopped' and unless otherwise noted are in serviceable / working condition / shape!
   In the case of output transistors, they will be tested / checked prior to posting and once again prior to shipment, pots / switches will be 'cursory' cleaned, parts already missing / utilized from circuit board will be noted, transformers will be checked prior to posting. Filter capacitors  will be tested / checked prior to posting and once again prior to shipment and 're-conditioned' / 're-formed' if necessary.

Above photo is of a Teac A-4010S having typical Main Capstan Belt change and Pinch Roller Arm re-lube operation. Just FYI as typical of some of the work that is required to bring any 20+ year old Reel to Reel tape deck back to life, regardless of how well a person selling an old deck, that has not been recently serviced, may say it works! In fact the worst decks are commonly the units that are stated as having low hours, have been little or never used, or the worst offender "is NIB (New In Box)". While that may seem like a good thing, experience tells us that those are the "scariest" to purchase. They generally require the most work to bring back to a practical level of operation. Just like a car that has sat for many years not being used, similar "atrophy" happens to most electro-mechanical devices, ie; Turntables, Cassette Decks, 8-Tracks, VCR's, R2R's etc. Just FYI.      (Click on above thumbnails to enlarge photos) TEAC A-4010S / A4010-S / A4010SU Reel-Reel PARTS / SPARES for sale / reference (parts are from 'salvage / donor' units) SOME PARTS MAY*BE INTERCHANGEABLE WITH OTHER TEAC "A" SERIES REEL TO REEL DECKS SUCH AS; TEAC A-1000R, A-1200, A-1500, A-1600, A-4010, A-6010 and others. *You'll need to do your research, typically by comparing part numbers from Service Manuals. Parting out.  Case / Cabinet / Bonnet, Walnut Veneer Case - fair, w/ some minor veneer chips / scuffs. Structurally sound - $55. SOLD (Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately)   Panel, Masonite Back Panel (there were two different versions of this back panel. One had 'taller' cutouts) - $35. (Cases, covers and side plate / panels, etc. do not include mounting screws as those are sold separately) Panel, Face Panel / Plate - Decent, Minor scuffing around capstan collar and light wear overall. Nothing too distracting - $55. Sash, Aluminum Side Rails 11162 / 11163 Left or Right - $35. ea. Knobs / Caps / Buttons / Covers, Round switch caps (when removable) such as 'Tape Speed' buttons - $20. ea. Switch, Power Push switch (button / cap sold separately) - $35. Switch, Tape Speed Switch array 44325 - $35.      Switch, Tape Tension Switch 44324 - $35.  Switch, 'Micro-Switch V-5-1A 44104 / 5A / 125 / 250VAC 17108 - $25.  Selector, Tape Transport selector assembly 25027 / 25028 (w/ buttons, micro switches for 'Stop', 'Fast Wind' & 'Play') - $55. complete w/ some wear to the 'white' lettering     Counter, Index counter / Tape counter mechanism 58505 - $35. TEAC A-4010S / A 4010-S / A4010SU PARTS / SPARES Pinch Roller, Rubber Pinch roller assembly (good used, reconditioned prior to shipment) 14009 - $65.  2 IN STOCK     Pinch Roller, Rubber Pinch roller ('NOS', reconditioned prior to shipment) 14009 - $85.  1 IN STOCK Arm, Pinch Roller Arm w/ axle / post 14142 (revised as version 14160-1) (cleaned and re-lubed prior to shipment) - $35. SOLD Arm, Tape Tension Arm Assemblies 18032 (the one on the 'supply' side) - $35. ea. SOLD Arm, Automatic Shut-Off Lever / Arm (the one on the 'take-up' side) - $35. ea. Heads, Play / Playback Head / Head-Stack / Headstack 66903 / 80712 (Virtually NO visible wear) - $85. Each / Single (2 avail) - ON HOLD FOR SHOP USE Heads, Record Head / Head-Stack / Headstack 66904 / 80713 (Virtually NO visible wear) - $85. Single - ON HOLD FOR SHOP USE Heads, Erase Head / Head-Stack / Headstack 66303 (Virtually NO visible wear) - $65. Single - ON HOLD FOR SHOP USE or All 4 above listed heads - while available - $185. - ON HOLD FOR SHOP USE Heads, Record, Play / Playback / Erase Head / Head-Stack / Headstack (about 50% visible wear, but likely many hours left) 13014 - $95. (all four heads on mounting) (P.65 of SM) (photo below right of Teac A-4010SU head azimuth adjustment screws)                    Cover, Head Cover with Teac 'A-4010SU' logo - fair cond. Has a couple dimples / dings and numerous scratches, and does not come with top, mounting screw / bolt. - $35. As-Is Sensor, Auto-Reverse Sensing Post 44964 - $35. TEAC A-4010S / A 4010-S / A4010SU PARTS / SPARES Reel Platform, Hub Reel Tables, Base 16155 (w/ black rubber pad, aluminum trim and 3 mounting screws) - $35. ea.  Brake Drums / Spindles, 17185 - $35. 2 avail. Brake Bands, Tape Tension brakes 17191 w/ 17138 felts- $30. each side (bands & felts only) Motor, TEAC A-4010S Capstan Main Motor 70115 - $65. Motor, TEAC A-4010SU Capstan Main Motor EM-281 w/ rubber fan blades. (There were various versions of this motor Not sure what the actual differences are / were) versions that we're aware of; #70112, 70114, (70115 Black color body, 100V 50/60HZ, 3.8/2.8uF, 35/30 Watts W/ exposed, gray rubber fan), (70116 Metallic color body, 100V 50/60HZ, 3.8/2.8uF, 35/30 Watts W/ exposed, gray rubber fan), (70118 Metallic color body, 100V 50/60HZ, 2.8/2.0uF, 34/31 Watts,  W/ Smoked plastic shrouded fan). We currently have "70115" remaining in stock. - $65. 70116 - SOLD Pulley, Capstan Belt Pulley 122256 - $35. Flywheel / capstan, Capstan / Flywheel 12166, 12263, 12265, 12267 assembly - $45. Motor, Hub / reel motor 70214 / 70217- $55. ea.  2 avail       Circuit Boards, Internal circuit board 48034-1 less relay - $55. ea. Circuit Boards, Internal circuit board 48064 with all three Motor and sensing relays 070868 - $55. ea 2 avail.     Connector, Playback Amplifier Circuit board connector TEAC 281281 - $40.    Resistors, Back tension Wire Wound Resistors with clamping adjustment connectors 250Ohms / 400Ohms / 30 watts  TEAC 52409 / 52416 - $25. ea. resistor Solenoid, Solenoid (KGS RL-614 / 61616-1)- $35. ea. Solenoid, TEAC 61621 / RL-613 100VDC / 1300 Ohms / 76 mA (for Pinch Roller / Tape Lifter Mechanism) - $35. Solenoid, TEAC 61617-1 / RL-614 100VDC / 1300 Ohms (for Reel Braking Mechanism) - $35. Relay, OMRON TYPE MH27P - $35. ea. TEAC A-4010S / A 4010-S / A4010SU PARTS / SPARES Transformer, A-4010S Power Transformer 56138-2 - $55.     Transformer, Power Transformer 56133 ?  - $55. Capacitor, TEAC 54531 capacitor 2.8μF x1, 1μF x1 @ 250 WV-AC - $20. used. - SOLD OUT Capacitor, TEAC 54548 capacitor 3μF x2, 1μF x2 @ 250 WV-AC - $20. used. Capacitor, capacitor 100μF x1 @ 150 WV-AC - $15. used. Capacitor, capacitor TEAC54547 capacitor 1000μF x1 @ 50 WV-AC - $20. used. Jacks, Panel Mount 7 or 11 pin connectors - $30. ea. Plug, 8 pin Dummy / NULL Plug for Remote jack 26093 - $35. - ON HOLD FOR SHOP USE Connector / cables, 11-pin jumper cable with connectors for Record Amp / Tape Deck - $65. ea. - ON HOLD FOR SHOP USE  Connector / cables, 7-pin jumper cable with connector for REC Equalizer - $55. ea. - ON HOLD FOR SHOP USE Fuse Cap / insert - $30. Fuse holder (non-world / multi-voltage style) (cap sold separately) - $20. Jack, AC input jack, Female - $25. Cord, AC cord / cable replacement -  CLICK HERE ... Call or Email for "SHOWN and NOT marked 'SOLD' " part you need. Location: PB, West, Middle-Tan cab, 4th drawer - Revised 8/27/19 CLICK HERE TO RETURN TO THE MAIN TEAC / TASCAM PARTS PAGE

TEAC RA-40S / RA40S RECORDING / PLAYBACK AMPLIFIER FOR TEAC Reel-Reel Deck PARTS / SPARES for sale / reference Parting out.  Knobs / Caps / Buttons / Covers, Mic / Line / Output  knobs (concentric pairs) - $25. / concentric pair Transformer, Power Transformer TEAC 56140 - $45. Meter,  VU Meter / Volume Meter, TEAC 58114 - Reference info only. Not currently available Circuit Boards, Record Bias circuit board TEAC 48079 w/ 'TEN 2SD137' transistors - $45. Circuit Boards, Power Supply Internal circuit board 48081 - $35. ea 2 avail.   Circuit Boards, Record Amp / Amplifier circuit board TEAC 48097 (less relays) - $65.     Relay, OMRON TYPE MH4P / 1168) - $35. ea.  - Revised 3/18/19 HERE     ARE     SOME     ADDITIONAL     RESOURCES     FOR     REPAIR    /    RESTORATION      __________________________________________________________________________________________________________

Unless specifically noted, we do not typically sell 'component level' parts such as resistors, diodes, transistors, semiconductors, ic's / integrated circuit chips, ceramic capacitors, led's, bulbs, lamps, belts, etc. We do commonly sell circuit boards / cards which will likely come with those parts attached.

MAY* *When we say "some parts "MAY" also fit", that does NOT mean ALL the parts listed 'WILL' fit, and unless we show specific info that a particular part DOES 'cross-pollinate', do not infer that it does or will fit. Only careful research and comparisons, on YOUR part with service manuals, service bulletins, other comparable units, etc., MAY indicate a POSSIBLE substitution. If your situation is 'critical', do not base your decision on information found on this or any other page of this web site and do your own research.

CONTACT INFO BELOW

$20. MINIMUM ORDER

 

                                             

>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with *only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)
*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

    Before calling, PLEASE read the text in below.      
 BEFORE CALLING
(800) 806-4231 EXT #1
~10:00 AM- ~5:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE

OR

BEFORE EMAILING
 parts@oaktreevintage.com
>>>(for 'PARTS'; <<<
as of NOW and for the foreseeable future,
due to staffing / time / resource limitations, we are shifting focus AWAY from MOST 'SALVAGE / USED / DONOR' parts requests at this time with *only a few exceptions, and will not likely be responding to calls or emails for those type of parts.  We will still process orders for '**non-unique / SKU' parts / accessories that offer an 'on-line payment' option.)
*at our discretion, some requests may still get a response if time allows.
*"unique" would apply to most 'salvage' Hi-Fi / Stereo / Speaker, scooter, MI, Pro-audio parts.
Parts that we normally stock and have a "Buy It" option are not included in the above notice.

We DO NOT have your part unless the following conditions are met:

A) You HAVE SEARCHED our page(s) and HAVE FOUND the part you are looking for SPECIFICALLY listed on one of our pages or you have solid information that it's a 'bona fide' substitution for your part (unless noted already, we won't have any further info along those lines)
AND
B) The part that you have found is NOT marked as SOLD or SOLD OUT.

If you do NOT see it listed after thoroughly searching the pertinent page (likely the page you landed on originally),  
we do not have it,   
nor do we know when it might come in,   
nor do we maintain "waiting lists" for parts,    
nor do we know who might have it.

Sorry, but phone and email traffic for parts we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.

 We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!

ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms may automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings".
We do not return calls / emails for requests for parts we don't show / or have available (we may choose contact with further, useful information).

 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |  KEYBOARD PARTS 
___________________________________________

Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A.

Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.

 SPEAKER PARTS   |   STEREO / HI-FI ELECTRONIC PARTS   |   SELLING-TRADING-CONSIGNING   |  KEYBOARD PARTS   I   FAQ'S  
  CONDITION RATINGS   |   ORDERING / POLICIES    |    WARRANTIES / RETURNS   |   SHIPPING     
 RESTORATION PROCEDURES   |   REPAIRS  | CONTACT PARTS


As much of the price charged for parts is for the 'time to extract' from it's donor unit, unless we send the 'wrong part', parts are NOT returnable.
See our "Warranties / Returns" page via the link below for more details.

POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
 

Copyright © 1997-2023 Oak Tree Enterprises, LLC

COPYRIGHT INFORMATION