Purveyors of Electronic, Musical and Vintage goods from then, now and in between. 
Since 1982.

8mm FILM PROJECTOR AC POWER CORD / CABLE FOR Argus, Bell & Howell / B&H, CHINON, GAF, SANKYO, VERNON, VIVITAR & WARDS 8MM FILM PROJECTORS

Replacement AC power cord / cable / mains lead for some 8mm film projectors such as the Argus 890Z, Bell & Howell / B&H 10MS, 11-XJ, 'Director Series Dual-8', Cabin "All-8", Chinon models; C-100SP, C-200SP, 727, 2000, 2000GL, GAF 2000S, GAF / CHINON 3000S or 3100S / CH2 'Super Magnetic Sound', Sound 4000, Sound 4100, 6100, Sears / Chinon Sound 6000, 'Sound 7000', 7500, Chinon 'Sound-8000', Chinon 9000 magnetic & optical Sound 8mm film projector, Chinon Whisper, Fujicascope M2 & M3, and may fit others (for sure will not fit Fujicascope M33, M36, M40), K-Mart 'Focal 8000 DZ', Keystone Custom 85, Keystone Dual Cartridge E-5149, Revere 718 / AP-718 / AZ-718, Sankyo Dualux-1000, Sankyo Dualux-2000H, Sankyo Sound 500, Sound 600, Sound-662, Sound 700, Sankyo 8mm Sound-762 (MAKE SURE YOUR SANKYO is the "2-PIN" version, NOT "3-Prongs" version (see photos below)) Magnetic 2 Track Sound, Sears 8mm projectors Super Sound II 9258 / 837.9258, 9259 / 549.92590, Dual Silent 200 / 9215 / 549.92150 (B&H ‘MS-10’), Sekonic 30-J?, Vernon S-500, Vivitar 733A, Wards 877 & likely many others. Also fits American Concertone 505 / 505R Reel to Reel, made by Teac in 1960. This AC cord also fits Pioneer T-8800 Reel to Reel. May / will also fit Aiwa TP-1001, TP-1012 reel to reel recorders / players, OKI reel to reel tape decks / players / recorders such as the OKI 111, 222, 333-AB, & 555 and possibly any others by OKI and the Funai Invicta Reel to Reel tape machine. These will fit the units that have 8mm spacing on 2 recessed, round prongs / pins. (Above text, in it's entirety, including 'fit list' property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. It has taken me MANY hours to compile. Please do not 'STEAL' if for your own profit. See 'Copyright Information' page for details)

 

            

(Click on above thumbnails to enlarge photos) (same cord fits both and similar of the jacks shown above)
8mm Film Projector replacement AC power Cord / Cable for Bell & Howell / B&H, CHINON*, GAF, SANKYO, VERNON, VIVITAR & WARDS and likely other 8MM FILM PROJECTORS
for sale
Replacement AC power cord / cable / mains lead for some 8mm film / movie projectors such as the Argus 890Z, Bell & Howell / B&H 10MS, 11-XJ, 'Director Series Dual-8', Cabin "All-8", Chinon* models; C-100SP, C-200SP, 727, 2000, 2000GL, GAF 2000S, GAF / CHINON 3000S or 3100S / CH2 'Super Magnetic Sound', Super Sound 4000, Sound 4100, 6100, Sears / Chinon 'Sound 6000 / Sound 7000', 7500, Chinon 9000 & 9500 magnetic & optical Sound 8mm film projector, Chinon Whisper, Fujicascope M2 & M3, and may fit others (for sure will not fit Fujicascope M33, M36, M40), K-Mart 'Focal 8000 DZ', Keystone Custom 85, Keystone Dual Cartridge E-5149, Manon Slide projector, Revere 718 / AP-718 / AZ-718, Sankyo Dualux-1000, Sankyo Dualux-2000H, Sankyo Sound 460, Sankyo Sound 500, Sound 600, Sound-662, Sound 700, Sankyo 8mm Sound-762 Magnetic 2 Track Sound (MAKE SURE YOUR SANKYO is the "2-PIN" version, NOT "3-Prongs" version (see photos below)) , Sears 8mm projectors Super Sound II 9258 / 837.9258, 9259 / 549.92590, Dual Silent 200 / 9215 / 549.92150 (B&H ‘MS-10’), Sekonic 30-J?, Vernon S-500, Vivitar 733A, Wards 877 and likely many other 8mm film projectors. Also fits American Concertone 505 / 505R Reel to Reel, made by Teac in 1960. This AC cord also fits Pioneer T-8800 Reel to Reel and OKI reel to reel tape decks / players / recorders such as the OKI 111, 222, 333-AB, & 555 and possibly any others by OKI. May / will also fit Aiwa TP-1001, TP-1012 reel to reel recorders / players.

(Above text, in it's entirety, including 'fit list' property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. It has taken me MANY hours to compile. Please do not 'STEAL' if for your own profit. See 'Copyright Information' page for details)

 *WILL fit SOME Chinon 2500GL, 3000GL, 4000GL, 5000GL models* HOWEVER, WILL NOT FIT projectors with this type of jack ----->   (click on thumbnail to enlarge photo)

  They will fit the units that have 8mm center to center spacing on 2 recessed, 2.8mm ROUND pins / prongs. NOT rectangular pins / prongs spades.
PLEASE STUDY THE ABOVE PHOTOS TO COMPARE TO YOUR UNIT PRIOR TO ORDERING. THE SHAPE, SPACING & DIAMETER OF THE PINS ARE PERTINENT.

$28.99

Domestic US Customers	International Customers

likely used, but good condition.
limited availability.
For 'International / Non-North American' customers:
The 'wall plug end' is for North American / Edison style wall outlets, meaning that it terminates in 'two 'flat' spades'. You will likely need to get a correct adaptor for your countries wall outlet.


IF YOU PREFER TO PLACE YOUR ORDER BY PHONE,
PLEASE CALL US AT:
(800) 806-4231
- Press Option '2' for 'SALES' to order -
~10:00 AM- ~5:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE

Orders for this product taken by Phone vs via the "Buy Now" button will incur a $5.00 surcharge.



We do not have nor, sell, nor can get replacement projector belts, bulbs or lamps.

 

(Above text, in it's entirety, including 'fit list' property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. It has taken me MANY hours to compile. Please do not 'STEAL' if for your own profit. See 'Copyright Information' page for details)